Maximilian Weinmann ecdb24814f ramips: add support for SNR-CPE-ME1 ... SNR-CPE-ME1 is a wireless WiFi 5 router manufactured by SNR/NAG company. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 16 MiB (GD25Q128CSIG) - WLAN : 2.4 GHz (MediaTek MT7603EN) 5 GHz (MediaTek MT7610EN) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (in SoC) - USB : 3.0 x1 - UART : through-hole on PCB - [J4] 3.3V, RX, TX, GND (57600n8) - Power : 12 VDC, 2 A Flash instruction via TFTP: 1. Boot SNR-CPE-ME1 to recovery mode (hold the reset button while power on) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing 4. Do sysupgrade using web-interface Signed-off-by: Maximilian Weinmann <x1@disroot.org>		2023-05-07 14:44:54 +02:00
..
base-files/etc	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00
dts	ramips: add support for SNR-CPE-ME1	2023-05-07 14:44:54 +02:00
files/drivers	ramips: mt7620: split gsw hw_init to mac_init, ephy_init	2023-02-18 16:55:35 +01:00
image	ramips: add support for SNR-CPE-ME1	2023-05-07 14:44:54 +02:00
mt76x8	ramips: add support for OrayBox X1	2023-04-02 19:25:37 +02:00
mt7620	ramips: add support for Keenetic Lite III rev. A	2023-03-27 02:09:58 +02:00
mt7621	ramips: add support for SNR-CPE-ME1	2023-05-07 14:44:54 +02:00
patches-5.10	generic: 5.10: replace ramips AR8033 fiber patch with 5.18 patches	2023-04-22 17:21:29 +02:00
patches-5.15	generic: 5.15: replace ramips AR8033 fiber patch with 5.18 patches	2023-04-22 17:21:29 +02:00
rt288x	treewide: replace wpad-basic-wolfssl default	2023-02-04 02:35:03 +01:00
rt305x	treewide: replace wpad-basic-wolfssl default	2023-02-04 02:35:03 +01:00
rt3883	treewide: replace wpad-basic-wolfssl default	2023-02-04 02:35:03 +01:00
Makefile	ramips: Switch default kernel to 5.15	2023-02-17 16:31:53 +02:00
modules.mk	ramips: rename mtk-hsdma to hsdma-mt7621	2021-03-04 23:43:02 -10:00