openwrt/package/firmware
Pawel Dembicki 0a2b3b66db qoriq: add support for NXP T4240RDB board
Hardware specs:
  - NXP T4240, 12C/24T @ 1.67 GHz
  - 3 × 2 GB DDR3 SO-DIMM
  - 128 MB NOR flash
  - 2 GB SLC NAND
  - SD card interface
  - PCIe: x4 and x8
  - SATA 3 Gbps
  - 8 × 1 GbE
  - 4 × 10 GbE SFP
  - RTC

This commit adds the sysupgrade and factory images for T4240RDB board in
both variants:
  - nor: for booting and read whole system from NOR memory
  - sdboot: for booting and read whole system from SD card

SD Card images install:

  - Burn image to sdcard. E.g:
      gunzip -c gunzip -c openwrt-qoriq-generic-fsl_T4240RDB-squashfs-sdcard.img.gz | \
      sudo dd of=/dev/mmcblk0 conv=fsync,notrunc status=progress bs=4M && sync
  - Download lastest Cortina PHY firmware from NXP github [1], if you accept their
    EULA [2].
  - Install Cortina PHY on image, E.g:
      dd if=cs4315-cs4340-PHY-ucode.txt of=/dev/mmcblk0 bs=1 seek=2M
  - Insert SD-Card to SD slot
  - Switch SW3.4 to OFF
  - Configre mac addresses from sticker in u-boot. E.g:
      setenv ethaddr 00:10:f3:3a:a8:66
      setenv eth1addr 00:10:f3:3a:a8:67
      setenv eth2addr 00:10:f3:3a:a8:68
      setenv eth3addr 00:10:f3:3a:a8:69
      setenv eth4addr 00:10:f3:3a:a8:6a
      setenv eth5addr 00:10:f3:3a:a8:6b
      setenv eth6addr 00:10:f3:3a:a8:6c
      setenv eth7addr 00:10:f3:3a:a8:6d
      setenv eth8addr 00:10:f3:3a:a8:6e
      setenv eth9addr 00:10:f3:3a:a8:6f
      setenv eth10addr 00:10:f3:3a:a8:70
      setenv eth11addr 00:10:f3:3a:a8:71
      saveenv
  - reset and boot

NOR images install:

  - download and extract factory image on tftp server root
  - boot device and stop in u-boot (from nor or sd card u-boot)
  - configure server and ip address. E.g:
      setenv ipaddr 192.168.1.2
      setenv serverip 192.168.1.1
  - Download image and run flashing:
      tftpboot $loadaddr openwrt-qoriq-generic-fsl_T4240RDB-squashfs-factory-nor.bin
      protect off all
      erase $fwaddr +$filesize
      cp.b $loadaddr $fwaddr $filesize
  - Switch SW3.4 to ON
  - Switch SW3.1-3 to OFF
  - reboot
  - Do postprocessing (see bellow)

NOR images post processing:

  - Configre mac addresses from sticker in u-boot. E.g:
      setenv ethaddr 00:10:f3:3a:a8:66
      setenv eth1addr 00:10:f3:3a:a8:67
      setenv eth2addr 00:10:f3:3a:a8:68
      setenv eth3addr 00:10:f3:3a:a8:69
      setenv eth4addr 00:10:f3:3a:a8:6a
      setenv eth5addr 00:10:f3:3a:a8:6b
      setenv eth6addr 00:10:f3:3a:a8:6c
      setenv eth7addr 00:10:f3:3a:a8:6d
      setenv eth8addr 00:10:f3:3a:a8:6e
      setenv eth9addr 00:10:f3:3a:a8:6f
      setenv eth10addr 00:10:f3:3a:a8:70
      setenv eth11addr 00:10:f3:3a:a8:71
      saveenv
  - boot
  - Download and refresh RCW stored in eeprom:
      tr '\0' '\377' < /dev/zero | dd bs=256 of=/sys/bus/i2c/devices/0-0050/eeprom
      cat /tmp/openwrt-qoriq-generic-fsl_T4240RDB-squashfs-rcw.bin > /sys/bus/i2c/devices/0-0050/eeprom
  - Download lastest Cortina PHY firmware from NXP github [1], if you accept their
    EULA [2].
  - Install Cortina PHY on image, E.g:
      mtd write cs4315-cs4340-PHY-ucode.txt /dev/mtd4
  - reset and boot

[1] https://raw.githubusercontent.com/nxp-qoriq/qoriq-firmware-cortina/refs/tags/lf-6.12.34-2.1.0/cs4315-cs4340-PHY-ucode.txt
[2] https://github.com/nxp-qoriq/qoriq-firmware-cortina/blob/lf-6.12.34-2.1.0/EULA.txt

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/10941
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2026-01-09 18:45:02 +02:00
..
ath10k-ct-firmware ath10k-ct-firmware: update wave2 chip firmware to latest beta version 2025-08-24 00:21:26 +02:00
ath11k-firmware qualcommax: ipq50xx: split firmware variants and refactor QCN6122 support 2025-11-28 10:27:53 +01:00
broadcom-sprom treewide: update PKG_MIRROR_HASH to zst 2024-04-06 11:24:18 +02:00
cypress-firmware cypress-firmware: fix version for APK 2024-10-29 00:07:51 +01:00
cypress-nvram cypress-nvram: consolidate NVRAM packages 2022-11-16 20:14:13 +01:00
intel-microcode intel-microcode: update to 2025111 2025-11-15 19:28:03 +01:00
ipq-wifi ipq-wifi: rename BDF for EAP623-Outdoor HD v1 2026-01-08 11:18:23 +01:00
ixp4xx-microcode firmware: Resurrect the ixp4xx microcode package 2023-10-25 11:28:15 +02:00
lantiq lantiq: remove intel.com from URL 2026-01-02 18:07:02 +01:00
layerscape qoriq: add support for NXP T4240RDB board 2026-01-09 18:45:02 +02:00
linux-firmware treewide: switch to HTTPS URL 2026-01-02 18:07:02 +01:00
murata-firmware murata-firmware: add new package 2024-11-23 15:53:21 +01:00
murata-nvram murata-nvram: add symlink for STM32MP157C-DK2 2025-04-19 18:41:16 +02:00
omnia-mcu-firmware packages: drop DEVICE specific dependency for omnia 2024-11-05 09:59:49 +01:00
prism54-firmware prism54-firmware: set DL_DIR to package specific subdirectory 2022-09-22 16:48:37 -04:00
wireless-regdb wireless-regdb: Update to version 2025.10.07 2025-11-08 21:15:51 +01:00