mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-01-28 03:37:17 +01:00
5629e06cf2
This commit adds support for the Teltonika RUT976, part of the RUTE series, which is very similar to the RUT956. The RUT976 now has a 5G modem and the flash size has doubled. Specification: - MediaTek MT7628AN SoC - 128 MB RAM - 32MB Flash - 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1 - MediaTek MT7628AN 2.4 GHz 802.11n WiFi - Quectel RG255C 5G modem - GNSS - RS232, DB9 connector, Cypress ACM via USB, /dev/ttyACM0 - RS485 /dev/ttyS1 - microSD card slot - 2.0 USB Type-A HOST port - analog 0-24V input (MCP3221) - Relay - 2x Digital input - 2x Digital output - 2x SIM slot (can be swapped via GPIO) - eSIM (depends on hardware configuration, can be swapped via GPIO) GPIO: - 1 button (Reset) - 7 LEDs (power, status green/red, RSSI 1,2,3,4,5) - 5 Modem control (power button, reset, status, SIM select, eSIM select) - 2 Digital input - 2 Digital output - 1 Isolated input - 1 RS485 tx enable - 1 RS485 rx enable - 1 Relay - 1 Data Carrier Detect (DCD) Flashing via OEM WebUI: 1. Download the firmware image *-squashfs-factory.bin 2. Upload firmware image via OEM WebUI firmware update, do not keep settings To revert back to OEM firmware: https://wiki.teltonika-networks.com/view/Bootloader_menu Mobile data connection: Create proto qmi interface. Signed-off-by: Til Kaiser <mail@tk154.de> Link: https://github.com/openwrt/openwrt/pull/20933 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||