Ptilopsis Leucotis 0f8eba4f95 ath79: fix I2C on GL-AR300M devices ... On GL-AR300M Series GPIO17 described as I2C SDA in Device Tree. Because of GPIO_OUT_FUNCTION4 register was not initialized on start, GPIO17 was uncontrollable, it always in high state. According to QCA9531 documentation, default setting of GPIO17 is SYS_RST_L. In order to make GPIO17 controllable, it should write value 0x00 on bits [15:8] of GPIO_OUT_FUNCTION4 register, located at 0x1804003C address. Signed-off-by: Ptilopsis Leucotis <PtilopsisLeucotis@yandex.com> (cherry picked from commit 57efdd6a2d)		2022-05-15 16:39:45 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:53 +02:00
dts	ath79: fix I2C on GL-AR300M devices	2022-05-15 16:39:45 +02:00
files	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
generic	ath79: add support for Sophos AP100/AP55 family	2022-04-19 21:45:46 +02:00
image	ath79: ubnt: drop swconfig on ac-{lite,lr,mesh}	2022-05-01 13:23:12 +02:00
mikrotik	ath79: add support for MikroTik RouterBOARD 962UiGS-5HacT2HnT (hAP ac)	2022-04-19 21:45:46 +02:00
nand	ath79: improve support for GL.iNet GL-XE300	2022-03-17 21:55:10 +01:00
patches-5.10	kernel: bump 5.10 to 5.10.113	2022-05-01 14:13:15 +02:00
tiny	ath79: Move TPLink WPA8630Pv2 to ath79-tiny target	2022-04-10 16:26:01 +01:00
config-5.10	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
Makefile	ath79: switch to Kernel 5.10	2021-12-21 21:38:52 +01:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00