Sergei Iudin 4b0c433c39 ramips: Add suport for COMFAST CF-WR617AC ... Specifications: Chipset:MT7628DA+MT7612E Antenna : 2.4Ghz:2x5dbi Antenna + 5.8Ghz:2x5dbi Antenna Wireless Rate:2.4Ghz 300Mbps , 5.8Ghz 867Mbps Output Power :100mW(20dbm) Physical port:110/100Mbps RJ45 WAN Port , 310/100Mbps RJ45 LAN Port Flash: 8Mb DRam: 64Mb Flashing: default bootloader attempts to boot from tftp://192.168.1.10/firmware_auto.bin using 192.168.1.1 Known issues: mac-address-increment for 5GHZ doesnt work, i failed to figure out why. Original firmware using +1 from original value in factory partition. Signed-off-by: Sergei Iudin <tsipa740@gmail.com>		2022-07-03 22:14:05 +02:00
..
lzma-loader	ramips: lzma-loader: make FLASH_START configurable	2020-09-03 14:15:30 +02:00
common-sercomm.mk	ramips: add support for Beeline SmartBox GIGA	2022-07-03 20:25:38 +02:00
common-tp-link.mk	treewide: call check-size before append-metadata	2021-07-10 19:40:10 +02:00
Makefile	ramips: add support for Beeline SmartBox GIGA	2022-07-03 20:25:38 +02:00
mt76x8.mk	ramips: Add suport for COMFAST CF-WR617AC	2022-07-03 22:14:05 +02:00
mt7620.mk	ramips: add support for Netgear WN3100RPv2	2022-03-16 23:14:25 +09:00
mt7621.mk	ramips: add support for Beeline SmartBox GIGA	2022-07-03 20:25:38 +02:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	ramips: fix booting on ZyXEL NBG-419N v2	2022-06-20 11:05:41 +02:00
rt3883.mk	ramips: provide default BLOCKSIZE for Device/seama	2021-08-30 00:37:47 +02:00