Marcin Gordziejewski 39799974a3 ramips: add support for TP-Link RE650 v2 ... TP-Link RE650 v2 is largely similar to v1 that is already supported by OpenWrt. Notable differences is differnt SPI Flash - 8 MB instead of 16 MB (from cFeon instead of Winbond) and a different configuration of PCIE connections to wifi chips. Otherwise it's largely the same product as v1 Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 8 MB - cFeon QH64A-104HIP - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART pinout - GND, RX, TX, labeled in the middle of the PCB, requires soldering because they're not through holes. Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re650-v2-squashfs-factory.bin from the RE650 web interface. TFTP recovery to stock firmware: I didn't try recovering back to the stock firmware, however, if there is such process for other RExxx devices, it seems like it could be similar here. Signed-off-by: Marcin Gordziejewski <openwrt@flicksfix.com>		2022-04-23 22:02:27 +02:00
..
board.d	ramips: add support for TP-Link RE650 v2	2022-04-23 22:02:27 +02:00
hotplug.d/ieee80211	ramips: add support for YunCore AX820/HWAP-AX820	2022-04-23 20:46:25 +02:00
init.d	ramips: add support for Linksys EA6350 v4	2022-01-08 00:49:59 +01:00
uci-defaults	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00