openwrt/package
Abdul Aziz Amar 3b3dccae0e ramips: add support for BOLT! Arion
This device is from now-defunct BOLT! ISP in Indonesia.
The original firmware is based on mediatek SDK running linux 2.6 or 3.x in later revision.

Specifications:

- SoC:      MediaTek MT7621
- Flash:    32 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 2x 10/100/1000 Mbps (switched, LAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 2x internal, non-detachable
- LEDs:     Programmable LEDs: 5 blue LEDs (wlan, tel, sig1-3) and 2 red LEDs (wlan and sig1)
            Non-programmable "Power"  LED
- Buttons:  Reset and WPS

Instalation:
Install from TFTP

Set your PC IP to 10.10.10.3 and gateway to 10.10.10.123
Press "1" when turning on the router, and type the initramfs file name

You also need to solder pin header or cable to J4 or neighboring test points (T19-T21)
Pinouts from top to bottom: GND, TX, RX, VCC (3.3v)
Baudrate: 57600n8

There's also an additional gigabit transformer and RTL8211FD managed by the LTE module on the backside of the PCB.

Signed-off-by: Abdul Aziz Amar <abdulaziz.amar@gmail.com>
(cherry picked from commit 78c3534645)
2022-04-19 21:45:46 +02:00
..
base-files base-files: more robust sysupgrade on NAND 2022-04-15 14:11:59 +01:00
boot ramips: add support for BOLT! Arion 2022-04-19 21:45:46 +02:00
devel strace: Update to version 5.16 2022-02-01 21:25:02 +01:00
firmware linux-firmware: Update to version 20220411 2022-04-17 21:31:02 +02:00
kernel mac80211: fix QCA9561 PA bias 2022-04-18 06:43:06 +02:00
libs readline: add host PIC 2022-04-17 21:47:11 +02:00
network comgt: support ZTE MF286R modem 2022-04-17 21:31:02 +02:00
system procd: update to git HEAD 2022-04-15 14:12:04 +01:00
utils busybox: Fix snprintf arguments in lock 2022-04-05 23:33:16 +02:00
Makefile build: fix opkg install step for large package selection 2021-05-12 11:13:53 +02:00