mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-02-04 13:27:42 +01:00
7a8e2efed5
The D-Link DIR-1360 A1 is an AC1300 router based on the MT7621AT SoC. Specifications :- * SoC: MediaTek MT7621AT * RAM: 256 MB DDR3 * Flash: 128 MB SPI NAND (Winbond W29N01HV) * WiFi: MT7615D (2.4 GHz + 5 GHz DBDC) * Ethernet: 5x 10/100/1000 Mbps (1x WAN, 4x LAN) * USB: 1x USB 3.0 * Buttons: Reset, WPS * LEDs: Power (White/Orange), Internet (White/Orange), USB, 2.4G/5G WLAN MAC addresses are retrieved from the 'factory' partition via NVMEM. LAN: 0xe000 (gmac0) WAN: 0xe006 (gmac1) WLAN: 0xe00c (pcie0) Flash Instruction :- 1-Set a static IP on your PC (e.g., 192.168.0.10, Gateway 192.168.0.1). 2- Power off the router and connect your PC to a LAN port. 3- Hold the Reset button and power on the router; continue holding for 5 seconds. 4- Access the Recovery UI at http://192.168.0.1 in your browser. 5- Upload the OpenWrt factory.bin image and wait for the reboot. With these definitions in place, the DIR-1360 A1 boots reliably, exposes all hardware features correctly, and can be flashed via both the OEM recovery interface and standard OpenWrt upgrade paths. Signed-off-by: Aryaman Srivastava <aryamansrivastava895@gmail.com> Link: https://github.com/openwrt/openwrt/pull/21616 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| lzma-loader | ||
| common-sercomm.mk | ||
| common-tp-link.mk | ||
| Makefile | ||
| mt76x8.mk | ||
| mt7620.mk | ||
| mt7621.mk | ||
| rt288x.mk | ||
| rt305x.mk | ||
| rt3883.mk | ||