mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-01-27 23:47:19 +01:00
372f2563f6
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
A phy is configured in two stages
- phy_probe() for setup of structures
- config_init() for device setup (after reset)
RTL8214FC is a combo phy and the currently active port can be switched
with the SFP helper functions that are triggered during SFP insertion
and removal. In case a fibre SFP is inserted while booting the SFP
trigger is run between the above mentioned stages. During the final
setup in config_init() the phy is reset to the copper port. Thus no
link is available on fibre and the SFP must be reinserted for normal
operation.
For a consistent behaviour the fibre/copper port setup must run before
the SFP probing and not afterwards. Move the setup code from config_init()
into phy_probe().
Fixes:
|
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||