mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2025-12-10 07:34:40 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 2
openwrt/target/linux/mediatek/image/filogic.mk
Zhiwei Cao 344bb7f916 mediatek: filogic: add support Netcore NX30V2/N30PRO/POWER30AX/W7/GW3001 
Hardware specification:
  SoC: MediaTek MT7981B
  Flash: ESMT F50L1G41LB 128MB
  RAM: ESMT M15T2G16128A DDR3 256MB
  Ethernet: 3x 1G
  Button: Reset, WPS

MAC addresses
  LAN:	Label MAC (stored in Factory partition offset 0x1fef20)
  WAN:	LAN + 1
  WiFi:	LAN

Official LED layout, from left to right:
  [power] [internet] [wps] [wifi] [lan3/2/1] [wan]

Redefinition for OpenWrt:
  [power]: used for led-boot, led-failsafe, and led-running
  [internet]: used for WAN RX/TX indication
  [wps]: used for led-upgrade
  [wifi] and [lan3/2/1]: unchanged
  [wan]: used for WAN link indication

Installing OpenWrt:
  - Setup a tftp server on your PC. Copy
    xxx-preloader.bin, xxx-bl31-uboot.fip and
    xxx-initramfs.itb to tftp root directory.
  - Connect to the router via ssh or telnet,
    username: useradmin, password is the web
    login password of the router.
  - Backup all critical flash partitions with
    the following commands where x.x.x.x is
    the IP of your PC.

    IP=x.x.x.x
    cd /dev
    for d in /sys/class/mtd/mtd?; do
      if [ "$(cat $d/name)" = "BL2" ]; then
        tftp -l $(basename $d) -r bl2.img -p $IP
      elif [ "$(cat $d/name)" = "FIP" ]; then
        tftp -l $(basename $d) -r fip.bin -p $IP
      elif [ "$(cat $d/name)" = "Factory" ]; then
        tftp -l $(basename $d) -r factory.bin -p $IP
      fi
    done
    for d in /sys/devices/virtual/ubi/ubi0/ubi0_*; do
      [ "$(cat $d/name)" != "customer" ] && continue
      tftp -l $(basename $d) -r customer -p $IP
      break
    done

  - Flash with the following commands:

     cd /tmp
     tftp -r xxx-preloader.bin -g x.x.x.x
     tftp -r xxx-bl31-uboot.fip -g x.x.x.x
     mtd write xxx-preloader.bin spi0.0
     mtd write xxx-bl31-uboot.fip FIP
     mtd erase ubi

  - Set a static ip(192.168.1.254) for your PC.
    And then reboot the router. It will run
    initramfs image automatically.
  - After openwrt boots up, perform sysupgrade
    via web UI.

Reverting to the vendor firmware:
  - Setup a tftp server on your PC with ip
    address 192.168.1.254. And make sure
    bl2.img, fip.bin, factory.bin and customer
    are located in tftp root directory.
  - Power off the router.
  - Press and hold WPS key, then power on
    the router.
  - Release WPS key, when internet/wifi/wps
    leds are blinking.
  - Wait until internet/wifi/wps leds light
    up, power off the router.
  - Press and hold reset key, power up the
    router, release reset key 15s later.
  - Connect to http://192.168.1.1, now you
    can upload vendor .bin firmware.

Uboot netconsole:
  Uboot netconsole can be enabled by WPS
  or reset key.

  - Setup a linux PC with ip 192.168.1.254.
    Open a new terminal and execute
    'stty -isig -echo cbreak; nc -lup 6666'
  - Press and hold WPS(or reset) key, then
    power on the router.
  - Release key once internet/wifi/wps leds
    are all on.
    NOTE: don't hold the key more than 5s
    after internet/wifi/wps leds on, or it
    will try to revert to vendor firmware.
  - 5s later, uboot bootmenu will show on
    the terminal.

Signed-off-by: Zhiwei Cao <bfdeh@126.com>
Link: https://github.com/openwrt/openwrt/pull/18631
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-12-09 01:29:39 +01:00

3036 lines
110 KiB
Makefile
Raw Blame History

DTS_DIR := $(DTS_DIR)/mediatek
DEVICE_VARS += SUPPORTED_TELTONIKA_DEVICES
DEVICE_VARS += SUPPORTED_TELTONIKA_HW_MODS
define Image/Prepare
# For UBI we want only one extra block
rm -f $(KDIR)/ubi_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
define Build/fit-with-netgear-top-level-rootfs-node
$(call Build/fit-its,$(1))
$(TOPDIR)/scripts/gen_netgear_rootfs_node.sh $(KERNEL_BUILD_DIR)/root.squashfs > $@.rootfs
awk '/configurations/ { system("cat $@.rootfs") } 1' $@.its > $@.its.tmp
@mv -f $@.its.tmp $@.its
@rm -f $@.rootfs
$(call Build/fit-image,$(1))
endef
define Build/mt7981-bl2
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
endef
define Build/mt7981-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
endef
define Build/mt7986-bl2
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
endef
define Build/mt7986-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
endef
define Build/mt7987-bl2
cat $(STAGING_DIR_IMAGE)/mt7987-$1-bl2.img >> $@
endef
define Build/mt7987-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7987_$1-u-boot.fip >> $@
endef
define Build/mt7988-bl2
cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
endef
define Build/mt7988-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
endef
define Build/simplefit
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
-t 0x2e -N FIT -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@17k
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/mt798x-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
$(if $(findstring sdmmc,$1), \
-H \
-t 0x83 -N bl2 -r -p 4079k@17k \
) \
-t 0x83 -N ubootenv -r -p 512k@4M \
-t 0x83 -N factory -r -p 2M@4608k \
-t 0xef -N fip -r -p 4M@6656k \
-N recovery -r -p 32M@12M \
$(if $(findstring sdmmc,$1), \
-N install -r -p 20M@44M \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
) \
$(if $(findstring emmc,$1), \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
)
cat $@.tmp >> $@
rm $@.tmp
endef
# Variation of the normal partition table to account
# for factory and mfgdata partition
#
# Keep fip partition at standard offset to keep consistency
# with uboot commands
define Build/mt7988-mozart-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
-t 0x83 -N ubootenv -r -p 512k@4M \
-t 0xef -N fip -r -p 4M@6656k \
-t 0x83 -N factory -r -p 8M@25M \
-t 0x2e -N mfgdata -r -p 8M@33M \
-t 0xef -N recovery -r -p 32M@41M \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@73M
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/append-openwrt-one-eeprom
dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
endef
define Build/mstc-header
$(eval version=$(word 1,$(1)))
$(eval magic=$(word 2,$(1)))
gzip -c $@ | tail -c8 > $@.crclen
( \
printf "$(magic)"; \
tail -c+5 $@.crclen; head -c4 $@.crclen; \
dd if=/dev/zero bs=4 count=2; \
printf "$(version)" | dd bs=56 count=1 conv=sync 2>/dev/null; \
dd if=/dev/zero bs=$$((0x20000 - 0x84)) count=1 conv=sync 2>/dev/null | \
tr "\0" "\377"; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Build/zyxel-nwa-fit-filogic
$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
$@.its $@ "80 e1 81 e1 ff ff ff ff ff ff"
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/cetron-header
$(eval magic=$(word 1,$(1)))
$(eval model=$(word 2,$(1)))
( \
dd if=/dev/zero bs=856 count=1 2>/dev/null; \
printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
cat $@; \
) > $@.tmp
fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
rm $@.tmp
endef
define Device/abt_asr3000
DEVICE_VENDOR := ABT
DEVICE_MODEL := ASR3000
DEVICE_DTS := mt7981b-abt-asr3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot abt_asr3000
endef
TARGET_DEVICES += abt_asr3000
define Device/acelink_ew-7886cax
DEVICE_VENDOR := Acelink
DEVICE_MODEL := EW-7886CAX
DEVICE_DTS := mt7986a-acelink-ew-7886cax
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acelink_ew-7886cax
define Device/acer_predator-w6
DEVICE_VENDOR := Acer
DEVICE_MODEL := Predator Connect W6
DEVICE_DTS := mt7986a-acer-predator-w6
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_predator-w6
define Device/acer_predator-w6d
DEVICE_VENDOR := Acer
DEVICE_MODEL := Predator Connect W6d
DEVICE_DTS := mt7986a-acer-predator-w6d
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_predator-w6d
define Device/acer_predator-w6x-stock
DEVICE_VENDOR := Acer
DEVICE_MODEL := Predator Connect W6x (Stock Layout)
DEVICE_DTS := mt7986a-acer-predator-w6x-stock
SUPPORTED_DEVICES += acer,predator-w6x
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
DEVICE_PACKAGES := kmod-usb3 kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_predator-w6x-stock
define Device/acer_predator-w6x-ubootmod
DEVICE_VENDOR := Acer
DEVICE_MODEL := Predator Connect W6x (OpenWrt U-Boot Layout)
DEVICE_DTS := mt7986a-acer-predator-w6x-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot acer_predator-w6x
endef
TARGET_DEVICES += acer_predator-w6x-ubootmod
define Device/acer_vero-w6m
DEVICE_VENDOR := Acer
DEVICE_MODEL := Connect Vero W6m
DEVICE_DTS := mt7986a-acer-vero-w6m
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-leds-ktd202x kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_vero-w6m
define Device/asiarf_ap7986-003
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7986 003
DEVICE_DTS := mt7986a-asiarf-ap7986-003
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
endef
TARGET_DEVICES += asiarf_ap7986-003
define Device/adtran_smartrg
DEVICE_VENDOR := Adtran
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-hwmon-pwmfan
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/smartrg_sdg-8612
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8612
DEVICE_DTS := mt7986a-smartrg-SDG-8612
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8612
define Device/smartrg_sdg-8614
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8614
DEVICE_DTS := mt7986a-smartrg-SDG-8614
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8614
define Device/smartrg_sdg-8622
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8622
DEVICE_DTS := mt7986a-smartrg-SDG-8622
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8622
define Device/smartrg_sdg-8632
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8632
DEVICE_DTS := mt7986a-smartrg-SDG-8632
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8632
define Device/smartrg_sdg-8733
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8733
DEVICE_DTS := mt7988a-smartrg-SDG-8733
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-usb3 mt7988-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8733
define Device/smartrg_sdg-8733a
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8733A
DEVICE_DTS := mt7988d-smartrg-SDG-8733A
DEVICE_PACKAGES += mt7988-2p5g-phy-firmware kmod-mt7996-233-firmware kmod-phy-aquantia mt7988-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8733a
define Device/smartrg_sdg-8734
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8734
DEVICE_DTS := mt7988a-smartrg-SDG-8734
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-sfp kmod-usb3 mt7988-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8734
define Device/arcadyan_mozart
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := Mozart
DEVICE_DTS := mt7988a-arcadyan-mozart
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_PACKAGES := kmod-hwmon-pwmfan e2fsprogs f2fsck mkf2fs kmod-mt7996-firmware
KERNEL_LOADADDR := 0x46000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip emmc-gpt.bin
ARTIFACT/emmc-gpt.bin := mt7988-mozart-gpt
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot arcadyan_mozart
SUPPORTED_DEVICES += arcadyan,mozart
endef
TARGET_DEVICES += arcadyan_mozart
define Device/asus_rt-ax52
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX52
DEVICE_DTS := mt7981b-asus-rt-ax52
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifeq ($(IB),)
ARTIFACTS := initramfs.trx
ARTIFACT/initramfs.trx := append-image-stage initramfs-kernel.bin | \
uImage none | asus-trx -v 3 -n $$(DEVICE_MODEL)
endif
endef
TARGET_DEVICES += asus_rt-ax52
define Device/asus_rt-ax59u
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX59U
DEVICE_DTS := mt7986a-asus-rt-ax59u
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_rt-ax59u
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200
DEVICE_DTS := mt7986a-asus-tuf-ax4200
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE),)
# The default boot command of the bootloader does not load the ramdisk from the FIT image
ARTIFACTS := initramfs.trx
ARTIFACT/initramfs.trx := append-image-stage initramfs-kernel.bin | \
uImage none | asus-trx -v 3 -n $$(DEVICE_MODEL)
endif
endif
endif
endef
TARGET_DEVICES += asus_tuf-ax4200
define Device/asus_tuf-ax4200q
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200Q
DEVICE_DTS := mt7986a-asus-tuf-ax4200q
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifeq ($(IB),)
ifeq ($(CONFIG_TARGET_INITRAMFS_FORCE),y)
ARTIFACTS := initramfs.trx
ARTIFACT/initramfs.trx := append-image-stage initramfs-kernel.bin | \
uImage none | asus-trx -v 3 -n TUF-AX4200
endif
endif
endef
TARGET_DEVICES += asus_tuf-ax4200q
define Device/asus_tuf-ax6000
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX6000
DEVICE_DTS := mt7986a-asus-tuf-ax6000
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_tuf-ax6000
define Device/asus_zenwifi-bt8
DEVICE_VENDOR := ASUS
DEVICE_MODEL := ZenWiFi BT8
DEVICE_DTS := mt7988d-asus-zenwifi-bt8
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 mt7988-2p5g-phy-firmware kmod-mt7996-firmware mt7988-wo-firmware
KERNEL := kernel-bin | gzip | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_LOADADDR := 0x48080000
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := factory.bin
ARTIFACT/factory.bin := append-image initramfs-kernel.bin | uImage lzma
endif
endif
endef
TARGET_DEVICES += asus_zenwifi-bt8
define Device/asus_zenwifi-bt8-ubootmod
DEVICE_VENDOR := ASUS
DEVICE_MODEL := ZenWiFi BT8
DEVICE_VARIANT := U-Boot mod
DEVICE_DTS := mt7988d-asus-zenwifi-bt8-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_PACKAGES := kmod-usb3 mt7988-2p5g-phy-firmware kmod-mt7996-firmware mt7988-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7988-bl2 spim-nand-ubi-ddr4
ARTIFACT/bl31-uboot.fip := mt7988-bl31-uboot asus_zenwifi-bt8
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_LOADADDR := 0x46000000
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += asus_zenwifi-bt8-ubootmod
define Device/bananapi_bpi-r3
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R3
DEVICE_DTS := mt7986a-bananapi-bpi-r3
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand \
mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd \
mt7986a-bananapi-bpi-r3-respeaker-2mics
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7915e kmod-mt7986-firmware kmod-sfp kmod-usb3 \
e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
IMAGES := sysupgrade.itb
KERNEL_LOADADDR := 0x44000000
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACTS := \
emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ubi-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
pad-to 44M | mt7986-bl2 spim-nand-ubi-ddr4 |\
pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
pad-to 49M | mt7986-bl2 nor-ddr4 |\
pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
pad-to 51M | mt7986-bl2 emmc-ddr4 |\
pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
pad-to 56M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
endif
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_COMPAT_VERSION := 1.3
DEVICE_COMPAT_MESSAGE := First sfp port renamed from eth1 to sfp1
endef
TARGET_DEVICES += bananapi_bpi-r3
define Device/bananapi_bpi-r3-mini
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R3 Mini
DEVICE_DTS := mt7986a-bananapi-bpi-r3-mini
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3-mini
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-eeprom-at24 kmod-hwmon-pwmfan kmod-mt7915e kmod-mt7986-firmware \
kmod-phy-airoha-en8811h kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := snand-factory.bin sysupgrade.itb
ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
endif
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
pad-rootfs | append-metadata
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
snand-factory.bin snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-mini-emmc
ARTIFACT/snand-factory.bin := mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 2048k | \
ubinize-image fit squashfs-sysupgrade.itb
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ubi-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-mini-snand
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7986_bananapi_bpi-r3-mini-snand-u-boot.fip
ifneq ($(CONFIG_PACKAGE_airoha-en8811h-firmware),)
UBINIZE_PARTS += en8811h-fw=:$(STAGING_DIR_IMAGE)/EthMD32.bin
endif
endef
TARGET_DEVICES += bananapi_bpi-r3-mini
define Device/bananapi_bpi-r4-common
DEVICE_VENDOR := Bananapi
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_DTS_OVERLAY:= mt7988a-bananapi-bpi-r4-emmc mt7988a-bananapi-bpi-r4-rtc mt7988a-bananapi-bpi-r4-sd
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-mux-pca954x kmod-eeprom-at24 kmod-mt7996-firmware kmod-mt7996-233-firmware \
kmod-rtc-pcf8563 kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7988-wo-firmware
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := The non-switch ports were renamed to match the board/case labels
IMAGES := sysupgrade.itb
KERNEL_LOADADDR := 0x46000000
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot $$(DEVICE_NAME)-emmc
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-ubi-comb
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot $$(DEVICE_NAME)-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7988-bl2 sdmmc-comb |\
pad-to 6656k | mt7988-bl31-uboot $$(DEVICE_NAME)-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
pad-to 44M | mt7988-bl2 spim-nand-ubi-comb |\
pad-to 45M | mt7988-bl31-uboot $$(DEVICE_NAME)-snand |\
pad-to 51M | mt7988-bl2 emmc-comb |\
pad-to 52M | mt7988-bl31-uboot $$(DEVICE_NAME)-emmc |\
pad-to 56M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
endef
define Device/bananapi_bpi-r4
DEVICE_MODEL := BPi-R4
DEVICE_DTS := mt7988a-bananapi-bpi-r4
DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4
$(call Device/bananapi_bpi-r4-common)
endef
TARGET_DEVICES += bananapi_bpi-r4
define Device/bananapi_bpi-r4-poe
DEVICE_MODEL := BPi-R4 2.5GE
DEVICE_DTS := mt7988a-bananapi-bpi-r4-2g5
DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4-poe
$(call Device/bananapi_bpi-r4-common)
DEVICE_PACKAGES += mt7988-2p5g-phy-firmware
SUPPORTED_DEVICES += bananapi,bpi-r4-2g5
endef
TARGET_DEVICES += bananapi_bpi-r4-poe
define Device/bananapi_bpi-r4-lite
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R4 Lite
DEVICE_DTS := mt7987a-bananapi-bpi-r4-lite
DEVICE_DTS_OVERLAY:= mt7987a-bananapi-bpi-r4-lite-1pcie-2L mt7987a-bananapi-bpi-r4-lite-2pcie-1L \
mt7987a-bananapi-bpi-r4-lite-emmc mt7987a-bananapi-bpi-r4-lite-sd \
mt7987a-bananapi-bpi-r4-lite-nand mt7987a-bananapi-bpi-r4-lite-nor
DEVICE_DTS_CONFIG := config-mt7987a-bananapi-bpi-r4-lite
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x4ff00000
DEVICE_PACKAGES := kmod-eeprom-at24 kmod-gpio-pca953x kmod-i2c-mux-pca954x \
kmod-rtc-pcf8563 kmod-sfp kmod-usb3 e2fsprogs mkf2fs mt7987-2p5g-phy-firmware
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL_LOADADDR := 0x40000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7987-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7987-bl31-uboot bananapi_bpi-r4-lite-emmc
ARTIFACT/nor-preloader.bin := mt7987-bl2 nor-comb
ARTIFACT/nor-bl31-uboot.fip := mt7987-bl31-uboot bananapi_bpi-r4-lite-nor
ARTIFACT/snand-preloader.bin := mt7987-bl2 spim-nand2-ubi-comb
ARTIFACT/snand-bl31-uboot.fip := mt7987-bl31-uboot bananapi_bpi-r4-lite-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7987-bl2 sdmmc-comb |\
pad-to 6656k | mt7987-bl31-uboot bananapi_bpi-r4-lite-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
pad-to 44M | mt7987-bl2 spim-nand2-ubi-comb |\
pad-to 45M | mt7987-bl31-uboot bananapi_bpi-r4-lite-snand |\
pad-to 49M | mt7987-bl2 nor-comb |\
pad-to 50M | mt7987-bl31-uboot bananapi_bpi-r4-lite-nor |\
pad-to 51M | mt7987-bl2 emmc-comb |\
pad-to 52M | mt7987-bl31-uboot bananapi_bpi-r4-lite-emmc |\
pad-to 56M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
endif
endef
TARGET_DEVICES += bananapi_bpi-r4-lite
define Device/buffalo_wsr-6000ax8
DEVICE_MODEL := WSR-6000AX8
DEVICE_VENDOR := Buffalo
DEVICE_ALT0_MODEL := WSR-6000AX8P
DEVICE_ALT0_VENDOR := Buffalo
DEVICE_DTS_DIR := ../dts
DEVICE_DTS := mt7986b-buffalo-wsr-6000ax8
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE_SIZE := 26624k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += buffalo_wsr-6000ax8
define Device/cetron_ct3003
DEVICE_VENDOR := Cetron
DEVICE_MODEL := CT3003
DEVICE_DTS := mt7981b-cetron-ct3003
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
endef
TARGET_DEVICES += cetron_ct3003
define Device/cmcc_a10-stock
DEVICE_VENDOR := CMCC
DEVICE_MODEL := A10 (stock layout)
DEVICE_ALT0_VENDOR := SuperElectron
DEVICE_ALT0_MODEL := ZN-M5 (stock layout)
DEVICE_ALT1_VENDOR := SuperElectron
DEVICE_ALT1_MODEL := ZN-M8 (stock layout)
DEVICE_DTS := mt7981b-cmcc-a10-stock
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += cmcc_a10-stock
define Device/cmcc_a10-ubootmod
DEVICE_VENDOR := CMCC
DEVICE_MODEL := A10 (OpenWrt U-Boot layout)
DEVICE_ALT0_VENDOR := SuperElectron
DEVICE_ALT0_MODEL := ZN-M5 (OpenWrt U-Boot layout)
DEVICE_ALT1_VENDOR := SuperElectron
DEVICE_ALT1_MODEL := ZN-M8 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-cmcc-a10-ubootmod
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += cmcc,a10
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cmcc_a10
endef
TARGET_DEVICES += cmcc_a10-ubootmod
define Device/cmcc_rax3000m
DEVICE_VENDOR := CMCC
DEVICE_MODEL := RAX3000M
DEVICE_ALT0_VENDOR := CMCC
DEVICE_ALT0_MODEL := RAX3000Me
DEVICE_DTS := mt7981b-cmcc-rax3000m
DEVICE_DTS_OVERLAY := mt7981b-cmcc-rax3000m-emmc mt7981b-cmcc-rax3000m-nand
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
e2fsprogs f2fsck mkf2fs
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
pad-rootfs | append-metadata
ARTIFACTS := emmc-gpt.bin \
emmc-ddr3-bl31-uboot.fip emmc-ddr3-preloader.bin \
emmc-ddr4-bl31-uboot.fip emmc-ddr4-preloader.bin \
nand-ddr3-bl31-uboot.fip nand-ddr3-preloader.bin \
nand-ddr4-bl31-uboot.fip nand-ddr4-preloader.bin
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-ddr3-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-emmc-ddr3
ARTIFACT/emmc-ddr3-preloader.bin := mt7981-bl2 emmc-ddr3-1866mhz
ARTIFACT/emmc-ddr4-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-emmc-ddr4
ARTIFACT/emmc-ddr4-preloader.bin := mt7981-bl2 emmc-ddr4
ARTIFACT/nand-ddr3-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand-ddr3
ARTIFACT/nand-ddr3-preloader.bin := mt7981-bl2 spim-nand-ddr3-1866mhz
ARTIFACT/nand-ddr4-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand-ddr4
ARTIFACT/nand-ddr4-preloader.bin := mt7981-bl2 spim-nand-ddr4
endef
TARGET_DEVICES += cmcc_rax3000m
define Device/comfast_cf-e393ax
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-E393AX
DEVICE_ALT0_VENDOR := COMFAST
DEVICE_ALT0_MODEL := CF-E395AX
DEVICE_DTS := mt7981a-comfast-cf-e393ax
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += comfast_cf-e393ax
define Device/comfast_cf-wr632ax-common
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-WR632AX
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
endef
define Device/comfast_cf-wr632ax
DEVICE_DTS := mt7981b-comfast-cf-wr632ax
IMAGE_SIZE := 65536k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += cf-wr632ax
$(call Device/comfast_cf-wr632ax-common)
endef
TARGET_DEVICES += comfast_cf-wr632ax
define Device/comfast_cf-wr632ax-ubootmod
DEVICE_VARIANT := (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-comfast-cf-wr632ax-ubootmod
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot comfast_cf-wr632ax
$(call Device/comfast_cf-wr632ax-common)
endef
TARGET_DEVICES += comfast_cf-wr632ax-ubootmod
define Device/confiabits_mt7981
DEVICE_VENDOR := Confiabits
DEVICE_MODEL := MT7981
DEVICE_DTS := mt7981b-confiabits-mt7981
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-2500wan-gmac2-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += confiabits_mt7981
define Device/creatlentem_clt-r30b1-common
DEVICE_VENDOR := CreatLentem
DEVICE_MODEL := CLT-R30B1
DEVICE_ALT0_VENDOR := EDUP
DEVICE_ALT0_MODEL := RT2980
DEVICE_ALT1_VENDOR := Dragonglass
DEVICE_ALT1_MODEL := DGX21
DEVICE_ALT2_VENDOR := Livinet
DEVICE_ALT2_MODEL := Li228
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/creatlentem_clt-r30b1-112m
DEVICE_VARIANT := 112M
DEVICE_ALT0_VARIANT := 112M
DEVICE_ALT1_VARIANT := 112M
DEVICE_ALT2_VARIANT := 112M
DEVICE_DTS := mt7981b-creatlentem-clt-r30b1-112m
SUPPORTED_DEVICES += clt,r30b1 clt,r30b1-112m
IMAGE_SIZE := 114688k
$(call Device/creatlentem_clt-r30b1-common)
endef
TARGET_DEVICES += creatlentem_clt-r30b1-112m
define Device/creatlentem_clt-r30b1
DEVICE_DTS := mt7981b-creatlentem-clt-r30b1
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
IMAGE_SIZE := 65536k
$(call Device/creatlentem_clt-r30b1-common)
endef
TARGET_DEVICES += creatlentem_clt-r30b1
define Device/cudy_ap3000outdoor-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := AP3000 Outdoor
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R51
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_ap3000outdoor-v1
define Device/cudy_ap3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := AP3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-ap3000-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R49
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_ap3000-v1
define Device/cudy_m3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-m3000-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R37
DEVICE_DTS_LOADADDR := 0x44000000
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_m3000-v1
define Device/cudy_re3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := RE3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-re3000-v1
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 15424k
SUPPORTED_DEVICES += R36
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_re3000-v1
define Device/cudy_tr3000-256mb-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR3000
DEVICE_VARIANT := 256mb v1
DEVICE_DTS := mt7981b-cudy-tr3000-256mb-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R103
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 235520k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_tr3000-256mb-v1
define Device/cudy_tr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-tr3000-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R47
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_tr3000-v1
define Device/cudy_tr3000-v1-ubootmod
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR3000
DEVICE_VARIANT := v1 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-cudy-tr3000-v1-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 cudy-tr3000-v1
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cudy_tr3000-v1
endef
TARGET_DEVICES += cudy_tr3000-v1-ubootmod
define Device/cudy_wr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000-v1
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 15424k
SUPPORTED_DEVICES += R31
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000-v1
define Device/cudy_wr3000e-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000E
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000e-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R53
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000e-v1
define Device/cudy_wr3000s-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000S
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000s-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R59
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000s-v1
define Device/cudy_wr3000h-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000H
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000h-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R63
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000h-v1
define Device/cudy_wr3000p-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000P
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000p-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R57
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000p-v1
define Device/dlink_aquila-pro-ai-m30-a1
DEVICE_VENDOR := D-Link
DEVICE_MODEL := AQUILA PRO AI M30
DEVICE_VARIANT := A1
DEVICE_DTS := mt7981b-dlink-aquila-pro-ai-m30-a1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
IMAGES += recovery.bin
IMAGE/recovery.bin := append-image-stage initramfs-kernel.bin | sysupgrade-tar kernel=$$$$@ |\
pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E6110001 \x6A\x28\xEE\x0B \x00\x00\x2C\x00 \x00\x00\x20\x03 \x61\x6E
endif
endif
endef
TARGET_DEVICES += dlink_aquila-pro-ai-m30-a1
define Device/dlink_aquila-pro-ai-m60-a1
DEVICE_VENDOR := D-Link
DEVICE_MODEL := AQUILA PRO AI M60
DEVICE_VARIANT := A1
DEVICE_DTS := mt7986a-dlink-aquila-pro-ai-m60-a1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
IMAGES += recovery.bin
IMAGE/recovery.bin := append-image-stage initramfs-kernel.bin | sysupgrade-tar kernel=$$$$@ |\
pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E8202001 \x30\x6C\x19\x0C \x00\x00\x2C\x00 \x00\x00\x20\x03 \x82\x6E
endif
endif
endef
TARGET_DEVICES += dlink_aquila-pro-ai-m60-a1
define Device/edgecore_eap111
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := EAP111
DEVICE_DTS := mt7981a-edgecore-eap111
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
KERNEL_IN_UBI := 1
IMAGE_SIZE := 65536k
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += edgecore_eap111
define Device/elecom_wrc-x3000gs3
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-X3000GS3
DEVICE_DTS := mt7981b-elecom-wrc-x3000gs3
DEVICE_DTS_DIR := ../dts
IMAGES += factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := sysupgrade-tar | mstc-header 5.04(XZQ.0)b90 COMD | \
elecom-product-header WRC-X3000GS3
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += elecom_wrc-x3000gs3
define Device/gatonetworks_gdsp
DEVICE_VENDOR := GatoNetworks
DEVICE_MODEL := gdsp
DEVICE_DTS := mt7981b-gatonetworks-gdsp
DEVICE_DTS_OVERLAY := \
mt7981b-gatonetworks-gdsp-gps \
mt7981b-gatonetworks-gdsp-sd \
mt7981b-gatonetworks-gdsp-sd-boot
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
IMAGES := sysupgrade.itb
IMAGE_SIZE := 32768k
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs fitblk \
kmod-mt7915e kmod-mt7981-firmware \
kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb3 \
mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip sdcard.img.gz
ARTIFACT/preloader.bin := mt7981-bl2 nor-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot gatonetworks_gdsp
ARTIFACT/sdcard.img.gz := simplefit |\
append-image squashfs-sysupgrade.itb | check-size | gzip
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += gatonetworks_gdsp
define Device/glinet_gl-mt2500
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT2500
DEVICE_VARIANT := MaxLinear PHY
DEVICE_DTS := mt7981b-glinet-gl-mt2500-v1
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := -wpad-basic-mbedtls e2fsprogs f2fsck mkf2fs kmod-usb3
SUPPORTED_DEVICES += glinet,mt2500-emmc glinet,gl-mt2500-airoha
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-mt2500
endef
TARGET_DEVICES += glinet_gl-mt2500
define Device/glinet_gl-mt2500-airoha
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT2500
DEVICE_VARIANT := Airoha PHY
DEVICE_DTS := mt7981b-glinet-gl-mt2500-v2
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := -wpad-basic-mbedtls e2fsprogs f2fsck mkf2fs kmod-usb3 kmod-phy-airoha-en8811h airoha-en8811h-firmware
SUPPORTED_DEVICES += glinet,mt2500-emmc glinet,gl-mt2500
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
endef
TARGET_DEVICES += glinet_gl-mt2500-airoha
define Device/glinet_gl-mt3000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT3000
DEVICE_DTS := mt7981b-glinet-gl-mt3000
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += glinet,mt3000-snand
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 246272k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
endef
TARGET_DEVICES += glinet_gl-mt3000
define Device/glinet_gl-mt6000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT6000
DEVICE_DTS := mt7986a-glinet-gl-mt6000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
endef
TARGET_DEVICES += glinet_gl-mt6000
define Device/glinet_gl-x3000-xe3000-common
DEVICE_VENDOR := GL.iNet
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware mkf2fs \
kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option \
kmod-usb-storage kmod-usb-net-qmi-wwan uqmi
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 emmc-ddr4
endef
define Device/glinet_gl-x3000
DEVICE_MODEL := GL-X3000
DEVICE_DTS := mt7981a-glinet-gl-x3000
SUPPORTED_DEVICES := glinet,gl-x3000
$(call Device/glinet_gl-x3000-xe3000-common)
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-x3000
endef
TARGET_DEVICES += glinet_gl-x3000
define Device/glinet_gl-xe3000
DEVICE_MODEL := GL-XE3000
DEVICE_DTS := mt7981a-glinet-gl-xe3000
SUPPORTED_DEVICES := glinet,gl-xe3000
$(call Device/glinet_gl-x3000-xe3000-common)
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-xe3000
endef
TARGET_DEVICES += glinet_gl-xe3000
define Device/h3c_magic-nx30-pro
DEVICE_VENDOR := H3C
DEVICE_MODEL := Magic NX30 Pro
DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGE_SIZE := 65536k
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
endef
TARGET_DEVICES += h3c_magic-nx30-pro
define Device/huasifei_wh3000
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WH3000
DEVICE_DTS := mt7981b-huasifei-wh3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-usb3 f2fsck mkf2fs
SUPPORTED_DEVICES += huasifei,wh3000-emmc
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += huasifei_wh3000
define Device/huasifei_wh3000-pro
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WH3000 Pro
DEVICE_DTS := mt7981b-huasifei-wh3000-pro
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3 f2fsck mkf2fs
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += huasifei_wh3000-pro
define Device/imou_hx21
DEVICE_VENDOR := Imou
DEVICE_MODEL := HX21
DEVICE_DTS := mt7981b-imou-hx21
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot imou_hx21
endef
TARGET_DEVICES += imou_hx21
define Device/iptime_ax3000q
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX3000Q
DEVICE_DTS := mt7981b-iptime-ax3000q
DEVICE_DTS_DIR := ../dts
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 32768k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := sysupgrade-tar | append-metadata | check-size | iptime-crc32 ax3000q
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
endef
TARGET_DEVICES += iptime_ax3000q
define Device/iptime_ax3000se
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX3000SE
DEVICE_DTS := mt7981b-iptime-ax3000se
DEVICE_DTS_DIR := ../dts
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 32768k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := sysupgrade.bin
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := sysupgrade-tar | append-metadata | check-size | iptime-crc32 ax3kse
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
endef
TARGET_DEVICES += iptime_ax3000se
define Device/iptime_ax3000sm
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX3000SM
DEVICE_DTS := mt7981b-iptime-ax3000sm
DEVICE_DTS_DIR := ../dts
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 32768k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := sysupgrade-tar | append-metadata | check-size | iptime-crc32 ax3ksm
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
endef
TARGET_DEVICES += iptime_ax3000sm
define Device/iptime_ax3000m
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX3000M
DEVICE_DTS := mt7981b-iptime-ax3000m
DEVICE_DTS_DIR := ../dts
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 32768k
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := sysupgrade-tar | append-metadata | check-size | iptime-crc32 ax3000m
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
endef
TARGET_DEVICES += iptime_ax3000m
define Device/iptime_ax7800m-6e
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX7800M-6E
DEVICE_DTS := mt7986a-iptime-ax7800m-6e
DEVICE_DTS_DIR := ../dts
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 32768k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := factory.bin sysupgrade.bin
IMAGE/factory.bin := sysupgrade-tar | append-metadata | check-size | iptime-crc32 ax7800m
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware kmod-hwmon-gpiofan
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += iptime_ax7800m-6e
define Device/jcg_q30-pro
DEVICE_VENDOR := JCG
DEVICE_MODEL := Q30 PRO
DEVICE_DTS := mt7981b-jcg-q30-pro
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot jcg_q30-pro
endef
TARGET_DEVICES += jcg_q30-pro
define Device/jdcloud_re-cp-03
DEVICE_VENDOR := JDCloud
DEVICE_MODEL := RE-CP-03
DEVICE_DTS := mt7986a-jdcloud-re-cp-03
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware \
e2fsprogs f2fsck mkf2fs
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
pad-rootfs | append-metadata
ARTIFACTS :=gpt.bin preloader.bin bl31-uboot.fip
ARTIFACT/gpt.bin := mt798x-gpt emmc
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot jdcloud_re-cp-03
endef
TARGET_DEVICES += jdcloud_re-cp-03
define Device/kebidumei_ax3000-u22
DEVICE_VENDOR := Kebidumei
DEVICE_MODEL := AX3000-U22
DEVICE_DTS := mt7981b-kebidumei-ax3000-u22
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x43f00000
IMAGE_SIZE := 14848k
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
endef
TARGET_DEVICES += kebidumei_ax3000-u22
define Device/keenetic_kn-1812-common
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7992-firmware kmod-usb3 \
mt7988-2p5g-phy-firmware mt7988-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 229888k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | zyimage -d $$(ZYIMAGE_ID) -v "$$(DEVICE_MODEL)"
endef
define Device/keenetic_kn-1812
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-1812
DEVICE_DTS := mt7988d-keenetic-kn-1812
ZYIMAGE_ID := 0x801812
$(call Device/keenetic_kn-1812-common)
endef
TARGET_DEVICES += keenetic_kn-1812
define Device/keenetic_kn-3711
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3711
DEVICE_DTS := mt7981b-keenetic-kn-3711
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 108544k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | zyimage -d 0x803711 -v "KN-3711"
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += keenetic_kn-3711
define Device/keenetic_kn-3811
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3811
DEVICE_DTS := mt7981b-keenetic-kn-3811
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 233984k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | zyimage -d 0x803811 -v "KN-3811"
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += keenetic_kn-3811
define Device/keenetic_kn-3911
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3911
DEVICE_DTS := mt7981b-keenetic-kn-3911
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-phy-airoha-en8811h
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 108544k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | zyimage -d 0x803911 -v "KN-3911"
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += keenetic_kn-3911
define Device/konka_komi-a31
DEVICE_VENDOR := Konka
DEVICE_MODEL := KOMI A31
DEVICE_ALT0_VENDOR := E-Life
DEVICE_ALT0_MODEL := ETR631-T
DEVICE_ALT1_VENDOR := E-Life
DEVICE_ALT1_MODEL := ETR635-U
DEVICE_DTS := mt7981b-konka-komi-a31
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot konka_komi-a31
endef
TARGET_DEVICES += konka_komi-a31
define Device/mediatek_mt7981-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7981 rfb
DEVICE_DTS := mt7981-rfb
DEVICE_DTS_OVERLAY:= \
mt7981-rfb-spim-nand \
mt7981-rfb-mxl-2p5g-phy-eth1 \
mt7981-rfb-mxl-2p5g-phy-swp5
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
spim-nand-preloader.bin spim-nand-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr3
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr3
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
ARTIFACT/snfi-nand-preloader.bin := mt7981-bl2 snand-ddr3
ARTIFACT/snfi-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-snfi
ARTIFACT/spim-nand-preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/spim-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-spim-nand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
) \
pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
pad-to 49M | mt7981-bl2 nor-ddr3 |\
pad-to 50M | mt7981-bl31-uboot rfb-nor |\
pad-to 51M | mt7981-bl2 snand-ddr3 |\
pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
endef
TARGET_DEVICES += mediatek_mt7981-rfb
define Device/mediatek_mt7986a-rfb-nand
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7986 rfba AP (NAND)
DEVICE_DTS := mt7986a-rfb-spim-nand
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
define Device/mediatek_mt7986b-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7986 rfbb AP
DEVICE_DTS := mt7986b-rfb
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986b-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mediatek_mt7986b-rfb
define Device/mediatek_mt7987a-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7987A rfb
DEVICE_DTS := mt7987a-rfb
DEVICE_DTS_OVERLAY:= \
mt7987a-rfb-spim-nand \
mt7987a-rfb-spim-nor \
mt7987a-rfb-emmc \
mt7987a-rfb-sd \
mt7987a-rfb-eth0-an8801sb \
mt7987a-rfb-eth0-an8855 \
mt7987a-rfb-eth0-e2p5g \
mt7987a-rfb-eth0-mt7531 \
mt7987a-rfb-eth1-i2p5g \
mt7987a-rfb-eth2-an8801sb \
mt7987a-rfb-eth2-e2p5g \
mt7987a-rfb-eth2-sfp \
mt7987a-rfb-eth2-usb
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x4ff00000
DEVICE_PACKAGES := mt7987-2p5g-phy-firmware kmod-sfp
KERNEL_LOADADDR := 0x40000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
snand-preloader.bin \
snand-bl31-uboot.fip \
sdcard.img.gz
ARTIFACT/snand-preloader.bin := mt7987-bl2 spim-nand0-ubi-comb
ARTIFACT/snand-bl31-uboot.fip := mt7987-bl31-uboot rfb-spim-nand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7987-bl2 sdmmc-comb |\
pad-to 6656k | mt7987-bl31-uboot rfb-sd |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
) \
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
endef
TARGET_DEVICES += mediatek_mt7987a-rfb
define Device/mediatek_mt7988a-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7988A rfb
DEVICE_DTS := mt7988a-rfb
DEVICE_DTS_OVERLAY:= \
mt7988a-rfb-emmc \
mt7988a-rfb-sd \
mt7988a-rfb-snfi-nand \
mt7988a-rfb-spim-nand \
mt7988a-rfb-spim-nand-factory \
mt7988a-rfb-spim-nor \
mt7988a-rfb-eth1-aqr \
mt7988a-rfb-eth1-i2p5g-phy \
mt7988a-rfb-eth1-mxl \
mt7988a-rfb-eth1-sfp \
mt7988a-rfb-eth2-aqr \
mt7988a-rfb-eth2-mxl \
mt7988a-rfb-eth2-sfp
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_PACKAGES := mt7988-2p5g-phy-firmware kmod-sfp kmod-phy-aquantia
KERNEL_LOADADDR := 0x46000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot rfb-emmc
ARTIFACT/nor-preloader.bin := mt7988-bl2 nor-comb
ARTIFACT/nor-bl31-uboot.fip := mt7988-bl31-uboot rfb-nor
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-ubi-comb
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7988-bl2 sdmmc-comb |\
pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
) \
pad-to 44M | mt7988-bl2 spim-nand-comb |\
pad-to 45M | mt7988-bl31-uboot rfb-snand |\
pad-to 51M | mt7988-bl2 nor-comb |\
pad-to 51M | mt7988-bl31-uboot rfb-nor |\
pad-to 55M | mt7988-bl2 emmc-comb |\
pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
pad-to 62M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
endef
TARGET_DEVICES += mediatek_mt7988a-rfb
define Device/mercusys_mr80x-v3
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR80X
DEVICE_VARIANT := v3
DEVICE_DTS := mt7981b-mercusys-mr80x-v3
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mercusys_mr80x-v3
define Device/mercusys_mr85x
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR85X
DEVICE_DTS := mt7981b-mercusys-mr85x
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-phy-airoha-en8811h swconfig kmod-switch-rtl8367s
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mercusys_mr85x
define Device/mercusys_mr90x-v1
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR90X v1
DEVICE_DTS := mt7986b-mercusys-mr90x-v1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mercusys_mr90x-v1
define Device/mercusys_mr90x-v1-ubi
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR90X v1 (UBI)
DEVICE_DTS := mt7986b-mercusys-mr90x-v1-ubi
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | \
append-metadata
ARTIFACTS := bl31-uboot.fip preloader.bin
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot mercusys_mr90x-v1
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ubi-ddr3
endef
TARGET_DEVICES += mercusys_mr90x-v1-ubi
define Device/netcore_n60
DEVICE_VENDOR := Netcore
DEVICE_MODEL := N60
DEVICE_DTS := mt7986a-netcore-n60
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60
endef
TARGET_DEVICES += netcore_n60
define Device/netcore_n60-pro
DEVICE_VENDOR := Netcore
DEVICE_MODEL := N60 Pro
DEVICE_DTS := mt7986a-netcore-n60-pro
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60-pro
endef
TARGET_DEVICES += netcore_n60-pro
define Device/netcraze_nc-1812
DEVICE_VENDOR := Netcraze
DEVICE_MODEL := NC-1812
DEVICE_DTS := mt7988d-netcraze-nc-1812
ZYIMAGE_ID := 0xC01812
$(call Device/keenetic_kn-1812-common)
endef
TARGET_DEVICES += netcraze_nc-1812
define Device/netgear_eax17
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EAX17
DEVICE_ALT0_VENDOR := NETGEAR
DEVICE_ALT0_MODEL := EAX11
DEVICE_ALT0_VARIANT := v3
DEVICE_ALT1_VENDOR := NETGEAR
DEVICE_ALT1_MODEL := EAX15
DEVICE_ALT1_VARIANT := v3
DEVICE_ALT2_VENDOR := NETGEAR
DEVICE_ALT2_MODEL := EAX14
DEVICE_ALT2_VARIANT := v3
DEVICE_ALT3_VENDOR := NETGEAR
DEVICE_ALT3_MODEL := EAX12
DEVICE_ALT3_VARIANT := v2
DEVICE_ALT4_VENDOR := NETGEAR
DEVICE_ALT4_MODEL := EAX16
DEVICE_ALT5_VENDOR := NETGEAR
DEVICE_ALT5_MODEL := EAX19
DEVICE_DTS := mt7981b-netgear-eax17
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
NETGEAR_ENC_MODEL := EAX17
NETGEAR_ENC_REGION := US
NETGEAR_ENC_HW_ID_LIST := 1010000013120000_NETGEAR
NETGEAR_ENC_MODEL_LIST := EAX17;EAX11v3;EAX15v3;EAX14v3;EAX12v2;EAX16;EAX19
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL = kernel-bin | lzma | \
fit-with-netgear-top-level-rootfs-node lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_IN_UBI := 1
IMAGE_SIZE := 81920k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.img
# Padding to 10M seems to be required by OEM web interface
IMAGE/factory.img := sysupgrade-tar | \
pad-to 10M | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_eax17
define Device/netgear_wax220
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX220
DEVICE_DTS := mt7986b-netgear-wax220
DEVICE_DTS_DIR := ../dts
NETGEAR_ENC_MODEL := WAX220
NETGEAR_ENC_REGION := US
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGE_SIZE := 32768k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.img
# Padding to 10M seems to be required by OEM web interface
IMAGE/factory.img := sysupgrade-tar | \
pad-to 10M | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_wax220
define Device/netis_nx30v2
DEVICE_VENDOR := Netis
DEVICE_MODEL := NX30V2
DEVICE_ALT0_VENDOR := Netcore
DEVICE_ALT0_MODEL := POWER30AX
DEVICE_ALT1_VENDOR := Netcore
DEVICE_ALT1_MODEL := N30PRO
DEVICE_ALT2_VENDOR := GWBN
DEVICE_ALT2_MODEL := GW3001
DEVICE_ALT3_VENDOR := GLC
DEVICE_ALT3_MODEL := W7
DEVICE_DTS := mt7981b-netis-nx30v2
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := 117248k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := spim-nand-preloader.bin spim-nand-bl31-uboot.fip
ARTIFACT/spim-nand-preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/spim-nand-bl31-uboot.fip := mt7981-bl31-uboot netis_nx30v2
endef
TARGET_DEVICES += netis_nx30v2
define Device/netis_nx31
DEVICE_VENDOR := netis
DEVICE_MODEL := NX31
DEVICE_DTS := mt7981b-netis-nx31
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot netis_nx31
endef
TARGET_DEVICES += netis_nx31
define Device/nokia_ea0326gmp
DEVICE_VENDOR := Nokia
DEVICE_MODEL := EA0326GMP
DEVICE_DTS := mt7981b-nokia-ea0326gmp
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot nokia_ea0326gmp
endef
TARGET_DEVICES += nokia_ea0326gmp
define Device/nradio_c8-668gl
DEVICE_VENDOR := NRadio
DEVICE_MODEL := C8-668GL
DEVICE_DTS := mt7981b-nradio-c8-668gl
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-usb-serial-option kmod-usb-net-cdc-ether kmod-usb-net-qmi-wwan \
kmod-usb3
IMAGE_SIZE := 131072k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size
endef
TARGET_DEVICES += nradio_c8-668gl
define Device/openembed_som7981
DEVICE_VENDOR := OpenEmbed
DEVICE_MODEL := SOM7981
DEVICE_DTS := mt7981b-openembed-som7981
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-crypto-hw-atmel kmod-eeprom-at24 kmod-gpio-beeper kmod-rtc-pcf8563 \
kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option \
kmod-usb3 uqmi
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 244224k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += openembed_som7981
define Device/openfi_6c
DEVICE_VENDOR := OpenFi
DEVICE_MODEL := 6C
DEVICE_DTS := mt7981b-openfi-6c
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += openfi_6c
define Device/openwrt_one
DEVICE_VENDOR := OpenWrt
DEVICE_MODEL := One
DEVICE_DTS := mt7981b-openwrt-one
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-phy-airoha-en8811h
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
nor-preloader.bin nor-bl31-uboot.fip \
snand-preloader.bin snand-bl31-uboot.fip \
factory.ubi snand-factory.bin nor-factory.bin
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor
ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand
ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb
ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \
ubinize-image fit squashfs-sysupgrade.itb
ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \
append-openwrt-one-eeprom | pad-to 1024k | \
mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \
append-image-stage initramfs.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip \
$(if $(IB),recovery=:$(STAGING_DIR_IMAGE)/mediatek-filogic-openwrt_one-initramfs.itb,\
recovery=:$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)) \
$(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb)
endef
TARGET_DEVICES += openwrt_one
define Device/qihoo_360t7
DEVICE_VENDOR := Qihoo
DEVICE_MODEL := 360T7
DEVICE_DTS := mt7981b-qihoo-360t7
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
endef
TARGET_DEVICES += qihoo_360t7
define Device/routerich_ax3000
DEVICE_VENDOR := Routerich
DEVICE_MODEL := AX3000
DEVICE_DTS := mt7981b-routerich-ax3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Partition layout has been changed. Bootloader MUST be \
upgraded to avoid data corruption and getting bricked. \
Please, contact your vendor and follow the guide: \
https://openwrt.org/toh/routerich/ax3000#web_ui_method
endef
TARGET_DEVICES += routerich_ax3000
define Device/routerich_ax3000-ubootmod
DEVICE_VENDOR := Routerich
DEVICE_MODEL := AX3000 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-routerich-ax3000-ubootmod
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot routerich_ax3000
endef
TARGET_DEVICES += routerich_ax3000-ubootmod
define Device/routerich_ax3000-v1
DEVICE_VENDOR := Routerich
DEVICE_MODEL := AX3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-routerich-ax3000-v1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 mt7981-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
endef
TARGET_DEVICES += routerich_ax3000-v1
define Device/ruijie_rg-x60-pro
DEVICE_VENDOR := Ruijie
DEVICE_MODEL := RG-X60 Pro
DEVICE_DTS := mt7986a-ruijie-rg-x60-pro
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += ruijie_rg-x60-pro
define Device/snr_snr-cpe-ax2
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-AX2
DEVICE_DTS := mt7981b-snr-snr-cpe-ax2
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot snr_snr-cpe-ax2
endef
TARGET_DEVICES += snr_snr-cpe-ax2
define Device/teltonika_rutc50
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUTC50
SUPPORTED_TELTONIKA_DEVICES := teltonika,rutc
DEVICE_DTS := mt7981a-teltonika-rutc50
DEVICE_DTS_DIR := ../dts
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBINIZE_OPTS := -E 5
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan \
kmod-usb-serial-option kmod-gpio-nxp-74hc164 uqmi
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | append-teltonika-metadata
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += teltonika_rutc50
define Device/tenbay_wr3000k
DEVICE_VENDOR := Tenbay
DEVICE_MODEL := WR3000K
DEVICE_DTS := mt7981b-tenbay-wr3000k
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 49152k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += tenbay_wr3000k
define Device/totolink_x6000r
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := X6000R
DEVICE_DTS := mt7981b-totolink-x6000r
DEVICE_DTS_DIR := ../dts
IMAGES := sysupgrade.bin
IMAGE_SIZE := 14336k
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += totolink_x6000r
define Device/tplink_archer-ax80-v1
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := Archer AX80V1
DEVICE_DTS := mt7986a-tplink-archer-ax80-v1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-lp5523 kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += tplink_archer-ax80-v1
define Device/tplink_be450
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := BE450
DEVICE_DTS := mt7988d-tplink-be450
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7992-firmware kmod-usb3 \
mt7988-2p5g-phy-firmware mt7988-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += tplink_be450
define Device/tplink_re6000xd
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := RE6000XD
DEVICE_DTS := mt7986b-tplink-re6000xd
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += tplink_re6000xd
define Device/tplink_fr365-v1
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := FR365
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-tplink-fr365v1
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 32768k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/factory.ubi := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := fitblk kmod-sfp kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += tplink_fr365-v1
define Device/tplink_tl-xdr-common
DEVICE_VENDOR := TP-Link
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
DEVICE_PACKAGES := fitblk kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
endef
define Device/tplink_tl-xdr4288
DEVICE_MODEL := TL-XDR4288
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr4288
define Device/tplink_tl-xdr6086
DEVICE_MODEL := TL-XDR6086
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6086
define Device/tplink_tl-xdr6088
DEVICE_MODEL := TL-XDR6088
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6088
define Device/tplink_tl-xtr8488
DEVICE_MODEL := TL-XTR8488
DEVICE_DTS := mt7986a-tplink-tl-xtr8488
$(call Device/tplink_tl-xdr-common)
DEVICE_PACKAGES += kmod-mt7915-firmware
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xtr8488
endef
TARGET_DEVICES += tplink_tl-xtr8488
define Device/ubnt_unifi-6-plus
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi U6+
DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += ubnt_unifi-6-plus
define Device/unielec_u7981-01
DEVICE_VENDOR := Unielec
DEVICE_MODEL := U7981-01
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs fdisk partx-utils
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/unielec_u7981-01-emmc
DEVICE_DTS := mt7981b-unielec-u7981-01-emmc
DEVICE_VARIANT := (EMMC)
$(call Device/unielec_u7981-01)
endef
TARGET_DEVICES += unielec_u7981-01-emmc
define Device/unielec_u7981-01-nand
DEVICE_DTS := mt7981b-unielec-u7981-01-nand
DEVICE_VARIANT := (NAND)
$(call Device/unielec_u7981-01)
endef
TARGET_DEVICES += unielec_u7981-01-nand
define Device/wavlink_wl-wn536ax6-a
DEVICE_VENDOR := WAVLINK
DEVICE_MODEL := WL-WN536AX6
DEVICE_VARIANT := Rev a
DEVICE_DTS := mt7986a-wavlink-wl-wn536ax6-a
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += wavlink_wl-wn536ax6-a
define Device/wavlink_wl-wn551x3
DEVICE_VENDOR := WAVLINK
DEVICE_MODEL := WL-WN551X3
DEVICE_DTS := mt7981b-wavlink-wl-wn551x3
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += wavlink_wl-wn551x3
define Device/wavlink_wl-wn586x3
DEVICE_VENDOR := WAVLINK
DEVICE_MODEL := WL-WN586X3
DEVICE_DTS := mt7981b-wavlink-wl-wn586x3
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGE_SIZE := 15424k
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += wavlink_wl-wn586x3
define Device/wavlink_wl-wn586x3b
DEVICE_VENDOR := WAVLINK
DEVICE_MODEL := WL-WN586X3B
DEVICE_DTS := mt7981b-wavlink-wl-wn586x3b
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
IMAGES := factory.bin initramfs-kernel.bin sysupgrade.bin
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += wavlink_wl-wn586x3b
define Device/wavlink_wl-wn573hx3
DEVICE_VENDOR := WAVLINK
DEVICE_MODEL := WL-WN573HX3
DEVICE_ALT0_VENDOR := 7Links
DEVICE_ALT0_MODEL := WLR-1300
DEVICE_DTS := mt7981b-wavlink-wl-wn573hx3
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGE_SIZE := 14336k
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
IMAGES = WN573HX3-sysupgrade.bin
IMAGE/WN573HX3-sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
endef
TARGET_DEVICES += wavlink_wl-wn573hx3
define Device/widelantech_wap430x
DEVICE_VENDOR := Widelantech
DEVICE_MODEL := WAP430X
DEVICE_ALT1_VENDOR := Widelantech
DEVICE_ALT1_MODEL := AX3000AM
DEVICE_ALT1_VENDOR := UeeVii
DEVICE_ALT1_MODEL := UAP200
DEVICE_DTS := mt7981b-widelantech-wap430x
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
IMAGE_SIZE := 14784k
SUPPORTED_DEVICES += UAP200 AX3000AM # allow upgrade via GECOOS UART menu
endef
TARGET_DEVICES += widelantech_wap430x
define Device/xiaomi_mi-router-ax3000t
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router AX3000T
DEVICE_DTS := mt7981b-xiaomi-mi-router-ax3000t
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_mi-router-ax3000t
define Device/xiaomi_mi-router-ax3000t-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router AX3000T (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-xiaomi-mi-router-ax3000t-ubootmod
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-ax3000t
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endif
endef
TARGET_DEVICES += xiaomi_mi-router-ax3000t-ubootmod
define Device/xiaomi_mi-router-wr30u-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router WR30U (stock layout)
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
define Device/xiaomi_mi-router-wr30u-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endif
endef
TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
define Device/xiaomi_redmi-router-ax6000-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
define Device/xiaomi_redmi-router-ax6000-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endif
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
define Device/yuncore_ax835
DEVICE_VENDOR := YunCore
DEVICE_MODEL := AX835
DEVICE_DTS := mt7981b-yuncore-ax835
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 14336k
SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += yuncore_ax835
define Device/zbtlink_zbt-z8102ax
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-Z8102AX
DEVICE_DTS := mt7981b-zbtlink-zbt-z8102ax
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option
KERNEL_IN_UBI := 1
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zbtlink_zbt-z8102ax
define Device/zbtlink_zbt-z8102ax-v2
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-Z8102AX-V2
DEVICE_DTS := mt7981b-zbtlink-zbt-z8102ax-v2
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option
KERNEL_IN_UBI := 1
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Partition layout has been changed to fit the bootloader
endef
TARGET_DEVICES += zbtlink_zbt-z8102ax-v2
define Device/zbtlink_zbt-z8103ax
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-Z8103AX
DEVICE_DTS := mt7981b-zbtlink-zbt-z8103ax
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zbtlink_zbt-z8103ax
define Device/zyxel_ex5601-t0-stock
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5601-T0
DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := EX5601-T1
DEVICE_ALT1_VENDOR := Zyxel
DEVICE_ALT1_MODEL := T-56
DEVICE_VARIANT := (stock layout)
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 256k
PAGESIZE := 4096
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += zyxel_ex5601-t0-stock
define Device/zyxel_ex5601-t0-ubootmod
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5601-T0
DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := EX5601-T1
DEVICE_ALT1_VENDOR := Zyxel
DEVICE_ALT1_MODEL := T-56
DEVICE_VARIANT := (OpenWrt U-Boot layout)
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 256k
PAGESIZE := 4096
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL := kernel-bin | lzma
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
IMAGE/sysupgrade.itb := append-kernel | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-4k-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot zyxel_ex5601-t0
ifeq ($(IB),)
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endif
endef
TARGET_DEVICES += zyxel_ex5601-t0-ubootmod
define Device/zyxel_ex5700-telenor
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5700 (Telenor)
DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-ubootenv-nvram kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_ex5700-telenor
define Device/zyxel_nwa50ax-pro
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NWA50AX Pro
DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := NWA90AX Pro
DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
DEVICE_DTS_LOADADDR := 0x44000000
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_nwa50ax-pro
Reference in a new issue View git blame Copy permalink