openwrt/target/linux
Marcin Leksmark 2b7fffa963 ramips: add support for Cudy C200P
This patch adds support for Cudy C200P.

Specifications:

    SoC: MediaTek MT7621AT
    RAM: 256 MB (DDR3)
    Flash: 16 MB (NOR)
    POE Chip: IP804AR

Interfaces:

    Switch: 1 WAN, 4 LAN (Gigabit)
    Gigabit RJ45 PoE Ports on 2~5
    Max Power on a Single PoE Ports 	30W
    PoE Ports : The PoE ports comply with IEEE 802.3at/af standards.
    Ports: 1 USB-A 3.0 Ports

LED:

    System
    PoE Max Status
    Link/ACT/PoE Status of Each PoE Port

Physical Buttons:

 	Reset Button

Power Input:

 	DC Jack

Power Methods:

    DC: 54V 1.11A
    802.3at/af PoE
    Passive PoE: 24/48V

Max Power Consumption (W):

 	Total: 60W
    PoE: 55W
    PoE (when USB Device is plugged in): 50W
    No PoE: 5W

Installation:

To install OpenWRT, you need the intermediate firmware from Cudy. (U-boot is locked). After installing the intermediate firmware, you can install OpenWRT via sysupgrade.

Recovery:

TFTP available.
1. Place the recovery.bin in the serving directory of your TFTP server.
2. Set your IP to 192.168.1.88/24.
3. Press the “Reset” button of Cudy router and hold it. Before the Cudy router is powered on and before TFTP start to download the firmware, don't release the “Reset” button.
4. Power on the Cudy router.
5. You can release the reset button only when TFTP starts downloading firmware.
6. When the SYSTEM LED turns solid green, the upgrade is complete.

Serial:

1. Serial connection parameters: 115200 / 8N1
2. Serial connection voltage: 3.3V

PoE is not supported at the time of PR. The IP804R chip is not yet supported by OpenWRT.

Signed-off-by: Marcin Leksmark <lexmark3200@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/20165
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-10-08 00:59:35 +02:00
..
airoha airoha: fix scuclk node for an7581 2025-09-29 12:05:10 +02:00
apm821xx apm821xx: sata: refresh config 2025-07-27 18:22:31 +02:00
armsr armsr: Make kernel modules depend on target 2025-07-26 01:11:21 +02:00
at91 treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
ath79 ath79: asus: convert to nvmem for calibration 2025-10-04 20:46:19 +02:00
bcm27xx kernel: bump 6.12 to 6.12.50 2025-10-04 16:18:49 +02:00
bcm47xx treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
bcm53xx kernel: bump 6.6 to 6.6.103 2025-09-01 02:05:24 +02:00
bcm4908 bcm63xx-cfe: install into image staging dir 2025-04-13 10:44:19 +02:00
bmips treewide: remove of_gpio.h 2025-09-20 12:47:23 +02:00
d1 kernel: remove duplicate PREEMPT settings 2025-06-08 15:59:55 +02:00
econet econet: Add basic USB support with Mass Storage 2025-09-18 22:36:28 +02:00
gemini gemini: Add module for VSC73xx switches 2025-09-15 23:12:56 +02:00
generic kernel: ksmbd: revert upstream limit repeated connection 2025-10-05 00:17:02 +02:00
imx kernel: bump 6.6 to 6.6.103 2025-09-01 02:05:24 +02:00
ipq40xx ipq40xx: mikrotik: generate a RouterBOOT v7 NOR compatible sysupgrade 2025-09-29 17:34:51 +01:00
ipq806x treewide: fix compatible string for ath10k 2025-08-25 10:35:39 +02:00
ixp4xx ixp4xx: Add back Actiontec MI424WR A/C/D 2025-09-26 23:40:40 +02:00
kirkwood kirkwood: add kmod-ata-ahci as default to ix4-200d 2025-07-19 17:58:41 +02:00
lantiq lantiq: use new ADSL nvmem support 2025-09-23 23:24:33 +02:00
layerscape kernel: bump 6.12 to 6.12.43 2025-08-26 21:35:36 +02:00
loongarch64 loongarch64: switch to Linux 6.12 by default 2025-09-09 00:10:31 +02:00
malta malta: drop 6.6 support 2025-07-20 23:37:37 +02:00
mediatek mediatek: CreatLentem clt-r30b1: Add Livinet Li228 as alt vendor model 2025-10-04 20:51:35 +02:00
mpc85xx mpc85xx: tl-wdr4900: add back 5ghz LED 2025-08-13 09:57:05 +02:00
mvebu mvebu: use upstream DTS for Ctera C200-V2 2025-09-27 00:39:32 +02:00
mxs mxs: drop 6.6 support 2025-05-24 16:15:53 +02:00
octeon octeon: set kernel 6.12 as default and remove support for 6.6 2025-09-27 20:45:50 +01:00
omap omap: enable 6.12 testing kernel 2025-08-22 20:18:16 +02:00
pistachio pistachio: enable hash offload engine 2025-10-06 22:45:40 +02:00
qoriq kernel: Activate CONFIG_NET_SWITCHDEV in generic config 2025-03-15 13:54:59 +01:00
qualcommax qualcomax: dts: fix typo "disbled" 2025-09-23 21:52:06 +02:00
qualcommbe kernel: bump 6.12 to 6.12.45 2025-09-07 11:42:46 +02:00
ramips ramips: add support for Cudy C200P 2025-10-08 00:59:35 +02:00
realtek realtek: rtl930x: add XGS1250-12 B1 device 2025-10-07 00:25:02 +02:00
rockchip rockchip: make use of OpenWrt compiled dtbs 2025-10-04 15:01:50 +02:00
sifiveu kernel: remove duplicate PREEMPT settings 2025-06-08 15:59:55 +02:00
siflower treewide: remove of_gpio.h 2025-09-20 12:47:23 +02:00
starfive kernel: bump 6.12 to 6.12.48 2025-09-21 12:14:36 +02:00
stm32 generic: 6.12: add new config symbols 2025-07-13 15:27:54 +02:00
sunxi sunxi: add F1C100 (arm926ej-s) support 2025-10-06 10:26:56 +02:00
tegra tegra: add 6.12 as testing kernel 2025-07-13 00:49:37 +02:00
uml kernel: bump 6.12 to 6.12.33 2025-06-12 12:42:15 +02:00
x86 x86: rename and configure Mellanox Spectrum interfaces 2025-10-06 19:06:26 +02:00
zynq zynq: disable unused Vitesse PHY 2025-09-08 14:21:50 +02:00
Makefile linux: fix missing default packages in profiles.json 2024-11-17 19:29:06 +01:00