David Bauer 5d30ff1bc6 ramips: correct R6220 button flag ... All buttons on the Netgear R6220 are active-low while they are flagged as active-high. The GPIO status reads the following for no buttons pressed: root@64367-r6220:~# cat /sys/kernel/debug/gpio gpio-7 ( |wps ) in hi gpio-8 ( |wifi ) in hi gpio-14 ( |reset ) in hi Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit f7f9fe5256ebb660d3160452c3c01a9eb080938f)		2019-11-09 19:15:18 +01:00
..
base-files	ramips: fix duplicate network setup for dlink, dir-615-h1	2019-09-09 21:12:23 +08:00
dts	ramips: correct R6220 button flag	2019-11-09 19:15:18 +01:00
files-4.14/drivers	ramips: ethernet: remove unused SIOCETHTOOL ioctl handling	2019-06-05 10:12:30 +02:00
image	ramips: add factory image for NETGEAR R6220	2019-09-16 21:43:39 +02:00
mt76x8	ramips: enable R6120 USB power	2019-04-06 19:14:06 +02:00
mt7620	ramips: Add support for Head Weblink HDRM200	2019-05-17 21:41:43 +02:00
mt7621	ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE	2018-12-13 13:39:56 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.149	2019-10-15 16:13:06 +02:00
rt288x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt305x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt3883	ramips: rt3883: drop jimage support	2019-01-26 21:46:33 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00