INAGAKI Hiroshi 12ab6ef5c3 ramips: add support for I-O DATA WNPR2600G ... I-O DATA WNPR2600G is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7615 - 5 GHz : MediaTek MT7615 - Ethernet : 10/100/1000 Mbps - Switch : MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: Vcc, RX, GND, TX from SoC side - 57600n8 Flash instruction using factory image: 1. Boot WNPR2600G normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2019-09-25 14:44:36 +08:00
..
imagebuilder	imagebuilder: fix make info for empty SUPPORTED_DEVICES	2019-08-14 08:14:52 +02:00
linux	ramips: add support for I-O DATA WNPR2600G	2019-09-25 14:44:36 +08:00
sdk	sdk: use bundle-libraries.sh to ship kernel objtool tools	2019-09-03 10:45:25 +02:00
toolchain	target/toolchain/files/wrapper.sh: simplify 'case'	2019-07-15 19:29:08 +02:00
Config.in	build: add a config option for enabling a testing version of the target kernel	2019-05-11 11:37:10 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00