Coia Prant 0f095274fc ramips: Fix Hongdian H7920 v40 pinctrl default state ... According to the MT7628 hardware datasheet: - GPIO/4 was originally used for I2C, but is now used as the Modem Power. - GPIO/5 was originally used for I2C, but is now used as the SIM card select. (n/a for this device) - GPIO/6 was originally used for SPI CS1, but is now used as the Serial mode switch. - GPIO/36 was originally used for PERST, but is now used as the GPS OE. (n/a for this device) - GPIO/38 was originally used for WDT, but is now used as the Modem2 Power. (n/a for this device) - GPIO/44 was used for WLED_AN, but is now controlled by `gpio-leds`. Corrected pinctrl to ensure it works properly in the future. Signed-off-by: Coia Prant <coiaprant@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20256 (cherry picked from commit 44c79d094f) Link: https://github.com/openwrt/openwrt/pull/20257 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2025-10-05 18:32:21 +02:00
..
airoha
apm821xx
archs38
armsr
at91
ath79
bcm27xx
bcm47xx
bcm53xx
bcm4908
bmips
d1
gemini
generic
imx
ipq40xx
ipq806x
ixp4xx
kirkwood
lantiq
layerscape
loongarch64
malta
mediatek
mpc85xx
mvebu
mxs
octeon
omap
pistachio
qoriq
qualcommax
ramips	ramips: Fix Hongdian H7920 v40 pinctrl default state	2025-10-05 18:32:21 +02:00
realtek
rockchip
sifiveu
siflower
starfive
stm32
sunxi
tegra
uml
x86
zynq
Makefile