Aryaman Srivastava 7a8e2efed5 ramips: add support for D-Link DIR-1360 A1 ... The D-Link DIR-1360 A1 is an AC1300 router based on the MT7621AT SoC. Specifications :- * SoC: MediaTek MT7621AT * RAM: 256 MB DDR3 * Flash: 128 MB SPI NAND (Winbond W29N01HV) * WiFi: MT7615D (2.4 GHz + 5 GHz DBDC) * Ethernet: 5x 10/100/1000 Mbps (1x WAN, 4x LAN) * USB: 1x USB 3.0 * Buttons: Reset, WPS * LEDs: Power (White/Orange), Internet (White/Orange), USB, 2.4G/5G WLAN MAC addresses are retrieved from the 'factory' partition via NVMEM. LAN: 0xe000 (gmac0) WAN: 0xe006 (gmac1) WLAN: 0xe00c (pcie0) Flash Instruction :- 1-Set a static IP on your PC (e.g., 192.168.0.10, Gateway 192.168.0.1). 2- Power off the router and connect your PC to a LAN port. 3- Hold the Reset button and power on the router; continue holding for 5 seconds. 4- Access the Recovery UI at http://192.168.0.1 in your browser. 5- Upload the OpenWrt factory.bin image and wait for the reboot. With these definitions in place, the DIR-1360 A1 boots reliably, exposes all hardware features correctly, and can be flashed via both the OEM recovery interface and standard OpenWrt upgrade paths. Signed-off-by: Aryaman Srivastava <aryamansrivastava895@gmail.com> Link: https://github.com/openwrt/openwrt/pull/21616 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2026-02-01 19:10:44 +01:00
..
imagebuilder	build: use STAGING_DIR for special APK package versions	2026-02-01 11:16:54 +01:00
linux	ramips: add support for D-Link DIR-1360 A1	2026-02-01 19:10:44 +01:00
llvm-bpf
sdk	sdk: use GIT_COMMIT for buildbot SDK	2025-12-04 19:20:55 +01:00
toolchain
Config.in	targets: add USES_PM auto-feature	2025-07-20 12:16:13 +01:00
Makefile