mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-02-11 11:02:51 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 4
openwrt/target/linux/mediatek/image
History
Jörg Seitz 8bf63c2289
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Waiting to run
Details
mediatek: add support for device zbt-z8103ax-c 
- adopted MTD partition size increase from 64M to 128M
  -> this allows boot to complete
- moved MAC addressing stuff out of partition definitions
- all MAC addressing stuff is in .dtsi

Specifications:

SoC: MediaTek MT7981B
RAM: 256MiB
Flash: Winbond SPI-NAND 128 MiB
Switch: 1 WAN, 3 LAN (Gigabit) MediaTek MT7531
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7981B 2.4Ghz & 5.8Ghz

Led Layout from bottom to top:

    Power
    Mesh (RGB Led, user controllable, default set to OpenWrt Status)
    WLAN 2 GHz (user controllable)
    WAN (user controllable)
    LAN3
    LAN2
    LAN1
    WLAN 5 GHz (Not on front panel but blinks through enclosure,
               user controllable)

Buttons:

    Reset
    Mesh (user controllable, no default function)

Installation:

A. Through U-Boot menu:

 -  Prepare your connecting computer to use a static IP in
	network 192.168.1.0/24
 -  Power down the router and hold in the Reset button.
 -  While holding in the button power up the router again.
 -  Hold the button in for 10 seconds and then release.
 -  Use your browser to go to 192.168.1.1
 -  If you see a GUI allowing for flashing firmware then
	you got the right model.
 -  Upload the sysupgrade file.

Note: Recovery GUI can be used to recover from an incorrect
      firmware flash.

B. Through OpenWrt Dashboard:

    If your router comes with OpenWrt preinstalled
	(modified by the seller), you can easily upgrade
	by going to the dashboard (192.168.1.1) and then
	navigate to System -> Backup/Flash firmware,
	then flash the firmware

MAC Addresses were found in Factory partition:

offset 0x4 F8:5E:3C:xx:xx:aa --> Router Label -2
offset 0xa F8:5E:3C:xx:xx:bb --> Router Label -1
offset 0x24 F8:5E:3C:xx:xx:cc --> Router Label +1
offset 0x2a F8:5E:3C:xx:xx:yy --> printed on Router Label

Signed-off-by: Jörg Seitz <github.joeterminal@xoxy.net>
Link: https://github.com/openwrt/openwrt/pull/19823
(cherry picked from commit 479f1403f2)
Link: https://github.com/openwrt/openwrt/pull/21464
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2026-01-15 21:28:46 +01:00
..
filogic.mk mediatek: add support for device zbt-z8103ax-c 2026-01-15 21:28:46 +01:00
gen_scatterfile.sh target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
Makefile mediatek: add support for EROFS 2025-11-18 12:18:02 +01:00
mt7622.mk mediatek: add support for AsiaRF AP7622-WH1 2025-09-18 23:28:59 +02:00
mt7623.mk mediatek: fix build failure of mt7623/mt7629 using kernel 6.6 2024-03-16 15:25:05 +08:00
mt7629.mk mediatek: stage mt7622/mt7629 rfb u-boot images to bin folder 2025-07-19 02:59:16 +01:00