mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-01-28 03:37:17 +01:00
4284d56568
ASUS RT-AC3200 and ASUS RT-AC5300 are AC3200 and AC5300 routers, respectively, featuring 5 Ethernet ports over the integrated Broadcom switch. ASUS RT-AC3200 hardware info: * Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz * Switch: BCM53012 in BCM4709A0 * DDR3 RAM: 256 MB * Flash: 128 MB * 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC * 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC * Ports: 4 LAN Ports, 1 WAN Port ASUS RT-AC5300 hardware info: * Processor: Broadcom BCM4709C0 dual-core @ 1.4 GHz * Switch: BCM53012 in BCM4709C0 * DDR3 RAM: 512 MB * Flash: 128 MB * 2.4GHz: BCM4366 4x4 single chip 802.11b/g/n SoC * 5GHz: BCM4366 4x4 two chips 802.11a/n/ac SoC * Ports: 4 LAN Ports, 1 WAN Port Flashing instructions: * Boot to CFE Recovery Mode by holding the reset button while power-on. * Connect to the router with an ethernet cable. * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0. * Head to http://192.168.1.1. * Reset NVRAM. * Upload the OpenWrt image. CFE bootloader may reject flashing the image due to image integrity check. In that case, follow the instructions below. * Rename the OpenWrt image as firmware.trx. * Run a TFTP server and make it serve the firmware.trx file. * Run the URL below on a browser or curl. http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com> |
||
|---|---|---|
| .. | ||
| base-files | ||
| files/arch/arm/boot/compressed | ||
| generic | ||
| image | ||
| patches-6.12 | ||
| profiles | ||
| config-6.12 | ||
| Makefile | ||
| modules.mk | ||