mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-01-28 03:37:17 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 4
openwrt/target/linux/ath79/image/tiny.mk
INAGAKI Hiroshi 5baaee843a ath79: add support for NEC Aterm WF1200HP2 
NEC Aterm WF1200HP2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router with FE
ports, based on AR9344.

Specification:

- SoC              : Atheros AR9344
- RAM              : DDR2 128 MiB (2x ESMT M14D5121632A-2.5BG2A)
- Flash            : SPI-NOR 8 MiB (Macronix MX25L6406EM2I-12G)
- WLAN             : 2.4/5 GHz 2T2R
  - 2.4 GHz        : Atheros AR9344 (SoC)
  - 5 GHz          : Qualcomm Atheros QCA9882
- Ethernet         : 4x 10/100 Mbps
  - switch         : Atheros AR9344 (SoC)
- LEDs/Keys (GPIO) : 12x/4x
  - note           : all LEDs are controlled by ath10k chip (QCA9882)
- UART             : through-hole on PCB (J1)
  - assignment     : 3.3V, GND, NC, TX, RX from tri-angle marking
  - settings       : 9600n8 (U-Boot: 115200n8)
- Power            : 12 VDC, 0.7 A (Max. 8 W)
- Stock OS         : NetBSD based

Flash instruction using initramfs-factory.bin image (StockFW WebUI):

1. Boot WF1200HP2 with router mode
2. Access to the WebUI ("http://aterm.me/" or "http://192.168.10.1/") on
   the device and open firmware update page ("ファームウェア更新")
3. Select the OpenWrt initramfs-factory.bin image and click update
   ("更新") button
4. After updating, the device will be rebooted and booted with OpenWrt
   initramfs image
5. On the initramfs image, upload (or download) uboot.bin and
   sysupgrade.bin image to the device
6. Replace the bootloader with uboot.bin image

   mtd write <uboot.bin image> bootloader

7. Perform sysupgrade with sysupgrade.bin image

   sysupgrade <sysuppgrade image>

8. Wait ~120 seconds to complete flashing and rebooting

Flash instruction using initramfs-factory.bin image (bootloader CLI):

 1. Connect and open serial console
 2. Power on WF1200HP2 and interrupt bootloader by ESC key
 3. Login to the bootloader CLI with the password "chiron"
 4. Start TFTP server by "tftpd" command
 5. Upload initramfs-factory.bin via tftp from your computer

    example (Windows): tftp -i 192.168.0.1 PUT initramfs-factory.bin

 6. Boot initramfs image by "boot" command
 7. On the initramfs image, backup the stock bootloader and firmware if
    needed
 8. Upload (or download) uboot.bin and sysupgrade.bin image to the
    device
 9. Replace the bootloader with uboot.bin image (see above)
10. Perform sysupgrade with sysupgrade.bin image (see above)
11. Wait ~120 seconds to complete flashing and rebooting

Notes:

- The stock bootloader requires the unknown filesystem on firmware area
  in the flash chip. Booting OpenWrt from that filesystem cannot be
  handled, so the bootloader needs to be replaced to mainline U-Boot
  before OpenWrt installation.

Known issues:

- All LEDs on the front side are connected to the GPIO controller on the
  ath10k chip (QCA9882) and controlled by it. The current ath10k driver
  supports only one LED as "ath10k-phyN", but using as a GPIO controller
  is not supported yet. As a result, all 12x LEDs on the front side
  cannot be controlled by users.

MAC Addresses:

LAN    : C0:25:A2:xx:xx:44 (config,  0x6 (hex))
WAN    : C0:25:A2:xx:xx:45 (config,  0xc (hex))
2.4 GHz: C0:25:A2:xx:xx:46 (config,  0x0 (hex))
5 GHz  : C0:25:A2:xx:xx:47 (config, 0x12 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20611
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-12-01 00:17:48 +01:00

189 lines
4.6 KiB
Makefile
Raw Permalink Blame History

include ./common-buffalo.mk
include ./common-nec.mk
include ./common-senao.mk
define Device/buffalo_whr-g301n
$(Device/buffalo_common)
SOC := ar7240
DEVICE_MODEL := WHR-G301N
BUFFALO_PRODUCT := WHR-G301N
IMAGE_SIZE := 3712k
SUPPORTED_DEVICES += whr-g301n
DEFAULT := n
endef
TARGET_DEVICES += buffalo_whr-g301n
define Device/dlink_dap-1720-a1
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-1720
DEVICE_VARIANT := A1
IMAGE_SIZE := 15872k
SEAMA_SIGNATURE := wapac28_dlink.2015_dap1720
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca988x-ct \
kmod-ath10k-ct-smallbuffers rssileds
endef
TARGET_DEVICES += dlink_dap-1720-a1
define Device/dlink_dir-615-e4
SOC := ar7240
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-615
DEVICE_VARIANT := E4
IMAGE_SIZE := 3776k
FACTORY_IMAGE_SIZE := 3456k
IMAGES += factory.bin
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
IMAGE/factory.bin := $$(IMAGE/default) | \
check-size $$$$(FACTORY_IMAGE_SIZE) | pad-to $$$$(FACTORY_IMAGE_SIZE) | \
append-string "AP99-AR7240-RT-091105-05"
SUPPORTED_DEVICES += dir-615-e4
DEFAULT := n
endef
TARGET_DEVICES += dlink_dir-615-e4
define Device/dlink_dir-859-a
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-859
IMAGE_SIZE := 15872k
SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers
endef
define Device/dlink_dir-859-a1
$(Device/dlink_dir-859-a)
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-859-a1
define Device/dlink_dir-859-a3
$(Device/dlink_dir-859-a)
DEVICE_VARIANT := A3
endef
TARGET_DEVICES += dlink_dir-859-a3
define Device/dlink_dir-869-a1
$(Device/seama)
SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-869
DEVICE_VARIANT := A1
IMAGE_SIZE := 15872k
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers
SUPPORTED_DEVICES += dir-869-a1
endef
TARGET_DEVICES += dlink_dir-869-a1
define Device/engenius_eap350-v1
$(Device/senao_loader_okli)
BLOCKSIZE := 4k
SOC := ar7242
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-eap350
DEFAULT := n
endef
TARGET_DEVICES += engenius_eap350-v1
define Device/engenius_ecb350-v1
$(Device/senao_loader_okli)
BLOCKSIZE := 4k
SOC := ar7242
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-ecb350
DEFAULT := n
endef
TARGET_DEVICES += engenius_ecb350-v1
define Device/engenius_enh202-v1
$(Device/senao_loader_okli)
SOC := ar7240
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENH202
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-enh202
DEFAULT := n
endef
TARGET_DEVICES += engenius_enh202-v1
define Device/nec_wf1200hp
DEVICE_MODEL := Aterm WF1200HP
SOC := ar9344
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H047
$(Device/nec-netbsd-aterm)
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct \
-uboot-envtools
UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(SOC)_nec_aterm_fe-u-boot.bin
endef
TARGET_DEVICES += nec_wf1200hp
define Device/nec_wf1200hp2
DEVICE_MODEL := Aterm WF1200HP2
SOC := ar9344
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H053
$(Device/nec-netbsd-aterm)
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct \
-uboot-envtools
UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(SOC)_nec_aterm_fe-u-boot.bin
endef
TARGET_DEVICES += nec_wf1200hp2
define Device/nec_wg600hp
DEVICE_MODEL := Aterm WG600HP
SOC := ar9344
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H044
$(Device/nec-netbsd-aterm)
endef
TARGET_DEVICES += nec_wg600hp
define Device/nec_wr8750n
SOC := ar9344
DEVICE_MODEL := Aterm WR8750N
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H033a
$(Device/nec-netbsd-aterm)
endef
TARGET_DEVICES += nec_wr8750n
define Device/nec_wr9500n
SOC := ar9344
DEVICE_MODEL := Aterm WR9500N
BLOCKSIZE := 4k
IMAGE_SIZE := 16128k
NEC_FW_TYPE := H033
$(Device/nec-netbsd-aterm)
endef
TARGET_DEVICES += nec_wr9500n
define Device/pqi_air-pen
SOC := ar9330
DEVICE_VENDOR := PQI
DEVICE_MODEL := Air-Pen
DEVICE_PACKAGES := kmod-usb-chipidea2
IMAGE_SIZE := 7680k
SUPPORTED_DEVICES += pqi-air-pen
DEFAULT := n
endef
TARGET_DEVICES += pqi_air-pen
Reference in a new issue View git blame Copy permalink