mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2025-12-10 06:24:40 +01:00
5205c0c426
Microchip EV23X71A is a LAN9696 based EVB. Specifications: * CPU: Microchip LAN9696 switch SoC * DRAM: 1GB DDR4 * Storage: * 2MB QSPI NOR * 4GB eMMC * Networking: * 24 x 10/100/1000 RJ45 via LAN8814 Quad PHY-s over QSGMII * 4 x 100/1000/2500/5000/10000 SFP+ ports * 1 x 10/100/1000 management RJ45 via LAN8840 PHY over RGMII (U-Boot too) * USB: 1 x USB2.0 Type-A * Management via USB-C (MCP2200): * UART @ 115200 baud * GPIO-s for bootstrap, reset and clock selection * DIP switch for boostrap configuration * LED-s: * 2 per networking port (Green and Yellow) * Green status LED * Yellow reset LED * Hard reset button * Power: * 12V DC barrel jack * 48/56V DC screw terminal * Selectable via toggle switch * PTP support: * Sync-E DPLL ZL30732B to generate the board required clocks * Two SMAs for PTP and two for Station clock inputs and outputs * Two ITU-T G.8275-compliant RS-422 interfaces for PTP applications * External PoE: * Option for PoE add-on, like EV14Y36A (IEEE 802.3af/at/bt Type 4 standard com-pliant) * Option for external CPU control via SPI and PCIe Installation instructions: 1. Connect to UART via the USB-C port 2. Connect the management port 3. Boot and interrupt U-Boot 4. TFTP the OpenWrt initramfs image and boot it 5. SCP the OpenWrt eMMC GPT image to a running OpenWrt initramfs to /tmp openwrt-microchipsw-lan969x-microchip_ev23x71a-squashfs-emmc-gpt.img.gz And decompress it via: gzip -d /tmp/openwrt-microchipsw-lan969x-microchip_ev23x71a-squashfs-emmc-gpt.img.gz 6. Wipe eMMC with: dd if=/dev/zero of=/dev/mmcblk0 bs=1M 7. Flash OpenWrt eMMC image with: dd if=/tmp/openwrt-microchipsw-lan969x-microchip_ev23x71a-squashfs-emmc-gpt.img of=/dev/mmcblk0 After a restart OpenWrt will boot, and then regular sysupgrade can be used for upgrades. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
359 lines
9.7 KiB
Text
359 lines
9.7 KiB
Text
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2006-2013 OpenWrt.org
|
|
|
|
menu "Target Images"
|
|
|
|
menuconfig TARGET_ROOTFS_INITRAMFS
|
|
bool "ramdisk"
|
|
default y if USES_INITRAMFS
|
|
help
|
|
Embed the root filesystem into the kernel (initramfs).
|
|
|
|
choice
|
|
prompt "Compression"
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_apm821xx
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ath79_mikrotik
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx
|
|
default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
|
|
default TARGET_INITRAMFS_COMPRESSION_ZSTD if TARGET_qualcommax
|
|
default TARGET_INITRAMFS_COMPRESSION_ZSTD if TARGET_microchipsw
|
|
default TARGET_INITRAMFS_COMPRESSION_XZ if USES_SEPARATE_INITRAMFS
|
|
default TARGET_INITRAMFS_COMPRESSION_NONE
|
|
depends on TARGET_ROOTFS_INITRAMFS
|
|
help
|
|
Select ramdisk compression.
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_NONE
|
|
bool "none"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_GZIP
|
|
bool "gzip"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_BZIP2
|
|
bool "bzip2"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_LZMA
|
|
bool "lzma"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_LZO
|
|
bool "lzo"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_LZ4
|
|
bool "lz4"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_XZ
|
|
bool "xz"
|
|
|
|
config TARGET_INITRAMFS_COMPRESSION_ZSTD
|
|
bool "zstd"
|
|
endchoice
|
|
|
|
config EXTERNAL_CPIO
|
|
string
|
|
prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS
|
|
default ""
|
|
help
|
|
Kernel uses specified external cpio as INITRAMFS_SOURCE.
|
|
|
|
config TARGET_INITRAMFS_FORCE
|
|
bool "Force"
|
|
depends on TARGET_ROOTFS_INITRAMFS
|
|
help
|
|
Ignore the initramfs passed by the bootloader.
|
|
|
|
config TARGET_ROOTFS_INITRAMFS_SEPARATE
|
|
bool "separate ramdisk"
|
|
depends on USES_SEPARATE_INITRAMFS && TARGET_ROOTFS_INITRAMFS && !TARGET_INITRAMFS_FORCE
|
|
default y if USES_SEPARATE_INITRAMFS
|
|
help
|
|
Generate separate initrd.cpio instead of embedding it.
|
|
This is useful for generating images with a dedicated
|
|
ramdisk e.g. in U-Boot's uImage and uImage.FIT formats.
|
|
|
|
comment "Root filesystem archives"
|
|
|
|
config TARGET_ROOTFS_CPIOGZ
|
|
bool "cpio.gz"
|
|
default y if USES_CPIOGZ
|
|
help
|
|
Build a compressed cpio archive of the root filesystem.
|
|
|
|
config TARGET_ROOTFS_TARGZ
|
|
bool "tar.gz"
|
|
default y if USES_TARGZ
|
|
help
|
|
Build a compressed tar archive of the root filesystem.
|
|
|
|
comment "Root filesystem images"
|
|
|
|
menuconfig TARGET_ROOTFS_EROFS
|
|
bool "erofs"
|
|
default y if USES_EROFS
|
|
select KERNEL_EROFS_FS
|
|
help
|
|
Build a EROFS root filesystem.
|
|
|
|
config TARGET_EROFS_PCLUSTER_SIZE
|
|
int "physical cluster size (in KiB)"
|
|
depends on TARGET_ROOTFS_EROFS
|
|
default 64 if LOW_MEMORY_FOOTPRINT
|
|
default 1024 if (SMALL_FLASH && !LOW_MEMORY_FOOTPRINT)
|
|
default 256
|
|
help
|
|
Specify the EROFS physical cluster size (must be equal
|
|
to or a multiple of the filesystem block size).
|
|
|
|
menuconfig TARGET_ROOTFS_EXT4FS
|
|
bool "ext4"
|
|
default y if USES_EXT4
|
|
help
|
|
Build an ext4 root filesystem.
|
|
|
|
config TARGET_EXT4_RESERVED_PCT
|
|
int "Percentage of reserved blocks in root filesystem"
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
default 0
|
|
help
|
|
Select the percentage of reserved blocks in the root filesystem.
|
|
|
|
choice
|
|
prompt "Root filesystem block size"
|
|
default TARGET_EXT4_BLOCKSIZE_4K
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
help
|
|
Select the block size of the root filesystem.
|
|
|
|
config TARGET_EXT4_BLOCKSIZE_4K
|
|
bool "4k"
|
|
|
|
config TARGET_EXT4_BLOCKSIZE_2K
|
|
bool "2k"
|
|
|
|
config TARGET_EXT4_BLOCKSIZE_1K
|
|
bool "1k"
|
|
endchoice
|
|
|
|
config TARGET_EXT4_BLOCKSIZE
|
|
int
|
|
default 4096 if TARGET_EXT4_BLOCKSIZE_4K
|
|
default 2048 if TARGET_EXT4_BLOCKSIZE_2K
|
|
default 1024 if TARGET_EXT4_BLOCKSIZE_1K
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
|
|
config TARGET_EXT4_JOURNAL
|
|
bool "Create a journaling filesystem"
|
|
depends on TARGET_ROOTFS_EXT4FS
|
|
default y
|
|
help
|
|
Create an ext4 filesystem with a journal.
|
|
|
|
config TARGET_ROOTFS_JFFS2
|
|
bool "jffs2"
|
|
depends on USES_JFFS2
|
|
help
|
|
Build a JFFS2 root filesystem.
|
|
|
|
config TARGET_ROOTFS_JFFS2_NAND
|
|
bool "jffs2 for NAND"
|
|
default y if USES_JFFS2_NAND
|
|
depends on USES_JFFS2_NAND
|
|
help
|
|
Build a JFFS2 root filesystem for NAND flash.
|
|
|
|
menuconfig TARGET_ROOTFS_SQUASHFS
|
|
bool "squashfs"
|
|
default y if USES_SQUASHFS
|
|
help
|
|
Build a squashfs root filesystem.
|
|
|
|
config TARGET_SQUASHFS_BLOCK_SIZE
|
|
int "Block size (in KiB)"
|
|
depends on TARGET_ROOTFS_SQUASHFS
|
|
default 64 if LOW_MEMORY_FOOTPRINT
|
|
default 1024 if (SMALL_FLASH && !LOW_MEMORY_FOOTPRINT)
|
|
default 256
|
|
help
|
|
Select squashfs block size, must be one of:
|
|
4, 8, 16, 32, 64, 128, 256, 512, 1024
|
|
|
|
config TARGET_SQUASHFS_BLOCK_READERS
|
|
int "mksquashfs tool parallel block reader threads"
|
|
depends on TARGET_ROOTFS_SQUASHFS
|
|
default 4
|
|
help
|
|
Specify the number of parallel block reader threads
|
|
(for files equal or larger than the squashfs block size).
|
|
|
|
config TARGET_SQUASHFS_SMALL_READERS
|
|
int "mksquashfs tool parallel small file reader threads"
|
|
depends on TARGET_ROOTFS_SQUASHFS
|
|
default 4
|
|
help
|
|
Specify the number of parallel small file reader threads
|
|
(for files less than the squashfs block size).
|
|
|
|
menuconfig TARGET_ROOTFS_UBIFS
|
|
bool "ubifs"
|
|
default y if USES_UBIFS
|
|
depends on USES_UBIFS
|
|
help
|
|
Build a UBIFS root filesystem.
|
|
|
|
choice
|
|
prompt "compression"
|
|
default TARGET_UBIFS_COMPRESSION_ZLIB
|
|
depends on TARGET_ROOTFS_UBIFS
|
|
help
|
|
Select compression type
|
|
|
|
config TARGET_UBIFS_COMPRESSION_NONE
|
|
bool "none"
|
|
|
|
config TARGET_UBIFS_COMPRESSION_LZO
|
|
bool "lzo"
|
|
|
|
config TARGET_UBIFS_COMPRESSION_ZLIB
|
|
bool "zlib"
|
|
endchoice
|
|
|
|
config TARGET_UBIFS_FREE_SPACE_FIXUP
|
|
bool "free space fixup" if TARGET_ROOTFS_UBIFS
|
|
default y
|
|
help
|
|
The filesystem free space has to be fixed up on first mount.
|
|
|
|
config TARGET_UBIFS_JOURNAL_SIZE
|
|
string
|
|
prompt "journal size" if TARGET_ROOTFS_UBIFS
|
|
default ""
|
|
|
|
config GRUB_IMAGES
|
|
bool "Build GRUB images (Linux x86 or x86_64 host only)"
|
|
depends on TARGET_x86
|
|
depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_EROFS
|
|
select PACKAGE_grub2
|
|
select PACKAGE_grub2-bios-setup
|
|
default y
|
|
|
|
config GRUB_EFI_IMAGES
|
|
bool "Build GRUB EFI images"
|
|
depends on TARGET_x86 || TARGET_armsr || TARGET_loongarch64
|
|
depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_EROFS
|
|
select PACKAGE_grub2 if TARGET_x86
|
|
select PACKAGE_grub2-efi if TARGET_x86
|
|
select PACKAGE_grub2-bios-setup if TARGET_x86
|
|
select PACKAGE_grub2-efi-arm if TARGET_armsr
|
|
select PACKAGE_grub2-efi-loongarch64 if TARGET_loongarch64
|
|
select PACKAGE_kmod-fs-vfat
|
|
default y
|
|
|
|
config GRUB_CONSOLE
|
|
bool "Use Console Terminal (in addition to Serial)"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default y
|
|
|
|
config GRUB_BAUDRATE
|
|
int "Serial port baud rate"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default 38400 if TARGET_x86_generic
|
|
default 115200
|
|
|
|
config GRUB_FLOWCONTROL
|
|
bool "Use RTE/CTS on serial console"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
depends on TARGET_SERIAL != ""
|
|
|
|
config GRUB_BOOTOPTS
|
|
string "Extra kernel boot options"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
help
|
|
If you don't know, just leave it blank.
|
|
|
|
config GRUB_TIMEOUT
|
|
string "Seconds to wait before booting the default entry"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default "5"
|
|
help
|
|
If you don't know, 5 seconds is a reasonable default.
|
|
|
|
config GRUB_TITLE
|
|
string "Title for the menu entry in GRUB"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
default "OpenWrt"
|
|
help
|
|
This is the title of the GRUB menu entry.
|
|
If unspecified, it defaults to OpenWrt.
|
|
|
|
config ISO_IMAGES
|
|
bool "Build LiveCD image (ISO)"
|
|
depends on TARGET_x86
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
|
|
config VDI_IMAGES
|
|
bool "Build VirtualBox image files (VDI)"
|
|
depends on TARGET_x86
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
select PACKAGE_kmod-e1000
|
|
|
|
config VMDK_IMAGES
|
|
bool "Build VMware image files (VMDK)"
|
|
depends on TARGET_x86 || TARGET_armsr
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
select PACKAGE_kmod-e1000
|
|
|
|
config VHDX_IMAGES
|
|
bool "Build Hyper-V image files (VHDX)"
|
|
depends on TARGET_x86
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
select PACKAGE_kmod-e1000
|
|
|
|
config TARGET_SERIAL
|
|
string "Serial port device"
|
|
depends on TARGET_x86 || TARGET_armsr || TARGET_loongarch64
|
|
default "ttyS0"
|
|
|
|
config TARGET_IMAGES_GZIP
|
|
bool "GZip images"
|
|
depends on TARGET_ROOTFS_EXT4FS || TARGET_x86 || TARGET_armsr || TARGET_malta || TARGET_loongarch64
|
|
default y
|
|
|
|
comment "Image Options"
|
|
|
|
source "target/linux/*/image/Config.in"
|
|
source "target/linux/*/*/image/Config.in"
|
|
|
|
config TARGET_KERNEL_PARTSIZE
|
|
int "Kernel partition size (in MiB)"
|
|
depends on USES_BOOT_PART
|
|
default 8 if TARGET_apm821xx_sata
|
|
default 64 if TARGET_bcm27xx
|
|
default 128 if TARGET_armsr
|
|
default 16
|
|
|
|
config TARGET_ROOTFS_PARTSIZE
|
|
int "Root filesystem partition size (in MiB)"
|
|
depends on USES_ROOTFS_PART || TARGET_ROOTFS_EXT4FS
|
|
default 232 if TARGET_loongarch64
|
|
default 448 if TARGET_mediatek || TARGET_microchipsw
|
|
default 104
|
|
help
|
|
Select the root filesystem partition size.
|
|
|
|
config TARGET_ROOTFS_PARTNAME
|
|
string "Root partition on target device"
|
|
depends on GRUB_IMAGES || GRUB_EFI_IMAGES
|
|
help
|
|
Override the root partition on the final device. If left empty,
|
|
it will be mounted by PARTUUID which makes the kernel find the
|
|
appropriate disk automatically.
|
|
|
|
config TARGET_ROOTFS_PERSIST_VAR
|
|
bool "Make /var persistent"
|
|
help
|
|
Do not symlink /var to /tmp, so that its content will persist
|
|
across reboots. When enabled, /var/run will still be linked
|
|
to /tmp/run.
|
|
|
|
endmenu
|