mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-01-28 03:37:17 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 4
openwrt/target/linux/ramips
History
Exact
Andrii Kuiukoff 97256a28fe
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Waiting to run
Details
ramips: add support for EDUP EP-RT2960S 
EDUP EP-RT2960S has the similar hardware design as the SIMAX1800T.
The main difference is the arrangement of the GPIO pins
and the location of the MAC address.

Specification
-------------
- SoC       : Mediatek MT7621
- RAM       : 256 MiB DDR3
- Flash     : 128 MiB NAND Flash
- WLAN      : Mediatek MT7905 DBDC
  - 2.4 GHz : 2x2 MIMO WiFi6
  - 5 GHz   : 2x2 MIMO WiFi6
- Ethernet  : MT7621 built-in 10/100/1000 Mbps 1x WAN; 3x LAN
- UART      : 3.3V, 115200n8
- Buttons   : 1x RESET; 1x WPS/MESH
- LEDs      : 1x Multi-Color(Blue;Green;Red)
- Power     : DC 12V1A
- CMIIT ID  : 2022AP7163
- TFTP IP   :
  - server  : 192.168.1.254
  - router  : 192.168.1.28

TFTP Installation(recommend)
------------
1. Set local tftp server IP "192.168.1.254" and NetMask "255.255.255.0".
2. Rename initramfs-kernel.bin to "factory.bin" and put it in the root
   directory of the tftp server. tftpd64 is a good choice for Windows.
3. Remove all Ethernet cables and WiFi connections from the PC, except
   for the one connected to the EDUP EP-RT2960S. Start the TFTP server, plug
   in the power adapter and wait for the OpenWrt system to boot.
4. Backup "firmware" partition and rename it to "firmware.bin". We need
   it to back to the stock firmware.
5. Use "fw_printenv" command to list envs. If "firmware_select=2" is
   observed then set u-boot env variable via command:
   `fw_setenv firmware_select 1`
6. Apply sysupgrade.bin in OpenWrt LuCI.

Web UI Installation
------------
1. Apply update by uploading initramfs-factory.bin to the web UI.
2. Use "fw_printenv" command to list envs. If "firmware_select=2" is
   observed then set u-boot env variable via command:
   `fw_setenv firmware_select 1`
3. Apply squashfs-sysupgrade.bin in OpenWrt LuCI.

Return to Stock Firmware
----------------------------
  Restore the backup firmware partition in the installation step 4.

MAC addresses
-------------
+---------+-------------------+
|         | MAC example       |
+---------+-------------------+
| LABEL   | 24:D5:1C:xx:xx:xx |
| LAN     | 24:D5:1C:xx:xx:xx |
| WAN     | 24:D5:1C:xx:xx:xx |
| WLAN2G  | 24:D5:1C:xx:xx:xx |
| WLAN5G  | 26:D5:1C:xx:xx:xx |
+---------+-------------------+

Tips:
-----------
  User can use `TFTP Installation` method to recover a brick device.

Signed-off-by: Andrii Kuiukoff <andros.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20600
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-11-16 21:59:28 +01:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: add support for EDUP EP-RT2960S 2025-11-16 21:59:28 +01:00
files/drivers treewide: remove of_gpio.h 2025-09-20 12:47:23 +02:00
image ramips: add support for EDUP EP-RT2960S 2025-11-16 21:59:28 +01:00
mt76x8 ramips: mt76x8: add support for Cudy RE1200 Outdoor v1 2025-10-20 00:42:28 +02:00
mt7620 ramips: drop 6.6 support 2025-07-07 20:30:26 +02:00
mt7621 ramips: add support for EDUP EP-RT2960S 2025-11-16 21:59:28 +01:00
patches-6.12 kernel: bump 6.12 to 6.12.51 2025-10-09 23:13:45 +02:00
rt288x ramips: drop 6.6 support 2025-07-07 20:30:26 +02:00
rt305x ramips: drop 6.6 support 2025-07-07 20:30:26 +02:00
rt3883 ramips: drop 6.6 support 2025-07-07 20:30:26 +02:00
Makefile ramips: use kernel 6.12 by default 2025-07-07 20:30:26 +02:00
modules.mk ramips: mtk-sd: backport Host Software Queue support 2025-06-16 19:31:51 +02:00