Port drivers for the hardware true random number generator found in
MediaTek SoCs and enable them for all boards.
This has the side-effect of U-Boot now providing '/chosen/kaslr-seed'
to Linux which is required to enabled KASLR.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add support for Airoha EN7581/AN7583 NPU variant firmware present in
linux-firmware. The Airoha EN7581 NPU variant is to support devices
equipped with the MT7996 WiFi chip.
While at it also add an extra new line to follow pattern of double new line to
separate each firmware package.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The fs_wait_for_key function runs multiple background processes that all
try to delete the same temporary file ($keypress_wait) when they exit.
This creates a race condition where one process successfully deletes the
file while others fail with ENOENT.
Busybox rm only suppresses "file not found" errors during the initial lstat()
check, not during the actual unlink() call. This causes error messages in the
boot log even with rm -f:
rm: can't remove '/tmp/tmp.hKjPDH': No such file or directory
Fixed by redirecting stderr to /dev/null for rm calls in concurrent contexts.
This change does not affect functionality and only avoids confusing log
output during boot.
Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/22079
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Several OpenWrt-related fixes are included in this release.
Drop upstreamed patches and refresh the rest.
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
Link: https://github.com/openwrt/openwrt/pull/22240
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXqmiX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXmbimX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
The &pointer + 1 trick is a C89 trick to point to area allocated after
the size of the struct. We have struct_size and flex arrays now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22170
Signed-off-by: Robert Marko <robimarko@gmail.com>
This reverts commit c053b22573.
KSZ DSA driver is the only thing in the kernel selecting DCB support
instead of depending on it if required.
So, it will enable DCB support without asking and we do not want the
kernel size increase, as well as current Layerscape ARMv8 build failure.
So, revert this until its fixed upstream or worked around.
Signed-off-by: Robert Marko <robimarko@gmail.com>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
Specifications:
SOC: MT7986b
RAM: 512MB
Flash: 512 MB SPI NAND
Ports: 2 LAN 2.5Gbps (GPY211C)
WIFI: MT7976GN + MT7976AN
LED: 3 bicolor LED - 1 monocolor LED
Buttons: Reset and WPS
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Co-authored-by: Hal Martin <halmartin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18364
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Link: https://github.com/openwrt/openwrt/pull/18364
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add menuconfig options to include modules for (virtio) vsockets. These are
used when running as Guest OS in a VM.
OpenWRT can be run in a vm (mostly commonly on the x86/64 and armsr
targets). Often it is convenient to have some sort of guest agent running,
to ease communication from host to guest.
Virtual Sockets provide this communication channel.
Virtio is a transport for this communication channel.
Virtual Sockets over virtio are for example used by Incus.
Virtual Sockets in general are used by most hypervisors, including VMware,
Hyper-V, and libvirt (qemu). These may need other transport-specific
modules not included in this commit.
Signed-off-by: Mathijs Rietbergen <mathijs.rietbergen@proton.me>
There are a number of pse chips already present in upstream Linux.
OpenWrt is starting to support a number of devices can contain various pse
chips. But having all the pse chip combinations defined at the target
level will result in bloat on images.
Present the current upstream Linux pse drivers as packages so that they
can be selectively included per board (rather than per target).
Signed-off-by: Bevan Weiss <bevan.weiss@gmail.com>
[Make it depend on REGULATOR_SUPPORT, and !SMALL_FLASH]
Link: https://github.com/openwrt/openwrt/pull/22172
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump uboot-stm32 to upstream release 2026.01.
Two upstream patches were backported to resolve silent crash on
STM32MP135F-DK board.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://github.com/openwrt/openwrt/pull/21965
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The key variable is not defined in the scope when setting wpa_psk. Use
config.key instead.
This fixes configuration the 64 characters wpa_psk directly.
Reported-by: donjoe in OpenWrt Forum
Link: https://github.com/openwrt/openwrt/pull/22182
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
75bedc5 wireless-regdb: Update regulatory info for Australia (AU) for 2025
a6e5195 wireless-regdb: Update broken link in regulatory.bin(5) manpage
9e8c67f wireless-regdb: Update regulatory info for Malaysia (MY) for 2024
61a4637 wireless-regdb: Update regulatory info for Malaysia (MY) for 2025
5cefe55 wireless-regdb: Update regulatory info for Tunisia (TN) on 6GHz for 2025
1a729ae wireless-regdb: Update regulatory info for Canada (CA) for 2025
ea20dfa wireless-regdb: update regulatory database based on preceding changes
Link: https://github.com/openwrt/openwrt/pull/22150
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Due to a missing include, the constant UINT_MAX is undefined. This
fixes issues when building v25.12.0-rc5. Including a newer version of
iproute2 would include the patch, but causes other building issues.
Signed-off-by: Jonas Lochmann <openwrt@jonaslochmann.de>
Link: https://github.com/openwrt/openwrt/pull/22128
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This adds kernel packages for the Microchip KSZ9477 switch family.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/22120
Signed-off-by: Robert Marko <robimarko@gmail.com>
sc->gpiochip is assigned to gc when it should be the other way around.
This allows gpiod_free to work properly.
Fixes: e78dc2eae4 ("mac80211: ath9k: clean up gpiochi")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22158
Signed-off-by: Robert Marko <robimarko@gmail.com>
It looks like commit 6d2f3b1b19 ("package: kernel: dtc: Add DTO support")
added this patch file 9 years ago without it ever being applied anywhere.
Back then there wasn't even a 'dtc' package, but we just used 'dtc' from
the Linux kernel sources.
Nowadays there is package/utils/dtc which is used to build dtc to be used
on the target (*not* a host-build!), and it of course already contains
support for device tree overlays since v1.4.3 from 2017...
This reverts commit 6d2f3b1b19.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/22118
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use substr() instead of array index syntax to access the first
character of the endpoint host string, as ucode does not support
array-style indexing on strings.
Fixes: https://github.com/openwrt/openwrt/issues/22116
Fixes: 8f977b4a40 ("wireguard-tools: fix handling of multi-value config options")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
180ffcc instance: use mkdir_p helper
9493a3d signal: handle SIGUSR1 as halt
4dd22d0 cgroups: fix syntax error
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Config options like addresses and ip6prefix can be passed as either a
space-separated string or an array. Add a to_array() helper and use it
consistently for all multi-value options (addresses, ip6prefix,
allowed_ips).
Fixes: https://github.com/openwrt/openwrt/issues/22102
Fixes: 41bc454602 ("wireguard-tools: rewrite proto handler in ucode")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Without initializing pwd_group, it's set to 0, which is reserved value.
When EAP-PWD is used in wpa_supplicant/eapol_test, next error is seen:
EAP-PWD: Server EAP-pwd-ID proposal: group=0 random=1 prf=1 prep=0
EAP-pwd: Unsupported or disabled proposal
Signed-off-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Secondary BSSes inherit the alloc value which bypasses
NL80211_ATTR_VIF_RADIO_MASK in nl80211_create_iface() and causes the
kernel to default new interfaces to all radios.
The ucode bss_create fallback fails to correct this because
the interface is already UP.. the kernel rejects SET_INTERFACE with
-EBUSY.
Signed-off-by: Chad Monroe <chad@monroe.io>
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add the OpenWrt CPPFLAGS to the CFLAGS. ebtables does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add the OpenWrt CPPFLAGS to the CFLAGS. arptables does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add the OpenWrt CPPFLAGS to the FLAGS. iwinfo does not support CPPFLAGS.
This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add the OpenWrt CPPFLAGS to the CFLAGS. zyxel-bootconfig does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add the OpenWrt CPPFLAGS to the CFLAGS. wireless-tools does not
support CPPFLAGS. This fixes fortify sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Forward the OpenWrt CPPFLAGS to the compile process. This fixes fortify
sources support.
Link: https://github.com/openwrt/openwrt/pull/22056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
