CONFIG_REGULATOR_QCOM_LABIBB is being disabled by targets manually, so
instead lets disable it in generic config.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Instead of disabling CONFIG_REGULATOR_QCOM_SPMI manually per target,
lets simply disable it in generic config.
Signed-off-by: Robert Marko <robimarko@gmail.com>
CONFIG_REGULATOR_QCOM_USB_VBUS showed up on Layerscape recently, and it
looks like multiple targets disable it manually, so simply disable it in
generic configuration instead.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Given that Linksys is the same brand and probably use the same OEM, it
stands to reason all devinfo hw_mac_addr implementations are the same.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22092
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated. NVMEM allows more flexibility in terms
of exotic setups while keeping correct MAC addresses.
env-size taken from file in uboot-envtools.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22107
Signed-off-by: Robert Marko <robimarko@gmail.com>
Userspace handling is deprecated. NVMEM allows flexibility in terms of
exotic setups by avoiding random MAC addresses.
u-boot env-size taken from the entry in uboot-envtools
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22107
Signed-off-by: Robert Marko <robimarko@gmail.com>
Align the ipq806x target to the pattern already used on other devices where
the device DTS are placed in a dedicated directory separate from the files
directory.
This, while trying to enforce a common pattern for every target, also permits to
do modification to device DTS without having to trigger a recompilation of the
entire kernel (as the files directory is not touched)
Link: https://github.com/openwrt/openwrt/pull/22039
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This header is deprecated and typically platform_device.h should be
used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21164
[Adapted the lantiq patches a bit]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit ab805ec316 ("generic: add missing squashfs config") enabled
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU in the generic config, so it is no
longer needed in the target configs.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Link: https://github.com/openwrt/openwrt/pull/21465
Signed-off-by: Robert Marko <robimarko@gmail.com>
This reverts commit 741689a335.
Only after merging I remebered the reason why it was changed to 0,0 [1].
[1] 1e20f7b6c6
Signed-off-by: Robert Marko <robimarko@gmail.com>
The reg value says it should be wifi@1,0, not wifi@0,0.
Should fix dtc warning.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20351
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use compatible before reg for consistency.
Also fixup the wifi node name for some qualcomm platforms where the slot
is 1 instead of 0.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20351
Signed-off-by: Robert Marko <robimarko@gmail.com>
All users of regular CONFIG_NVMEM_U_BOOOT_ENV have been converted to use
layouts.
CONFIG_NVMEM_U_BOOT_ENV selects the layout variant anyway so this is
safe to do.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16376
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The child node "partitions" doesn't have "reg" property. Hence, we
don't need to use "#address-cells" and "#size-cells" to describe the
reg property information.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20942
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop support for kernel 6.6 as now kernel 6.12 is set as default kernel
version.
Link: https://github.com/openwrt/openwrt/pull/20644
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Move the ipq806x target to kernel 6.12 by default as every kernel bump
problem has been handled.
Link: https://github.com/openwrt/openwrt/pull/20644
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The Google OnHub doesn't init the SMEM in SBL causing the CPUFreq driver
to fail probe. This is caused by the fact that new CPUFreq driver makes
use of SMEM to identify the SoC variant and on Google OnHub this is not
available.
Backport patch to detect this state and fallback to compatible
matching fixing the CPUFreq driver.
Link: https://github.com/openwrt/openwrt/pull/20587
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Align the sorting of cases with other targets.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20603
Signed-off-by: Robert Marko <robimarko@gmail.com>
Merge identical case in base-files.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20603
Signed-off-by: Robert Marko <robimarko@gmail.com>
This removes the obsolete trailing whitespaces from all base-files cases
to be in line with other targets.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20603
Signed-off-by: Robert Marko <robimarko@gmail.com>
The OnHub bootloader tries to patch the calibration directly into the
device tree, but it uses constant paths that look like this:
static const char *dt_path = "soc/pci@%8.8x/pcie@0/ath10k@0,0";
https://chromium.googlesource.com/chromiumos/platform/depthcharge/+/refs/heads/firmware-storm-6315.B/src/board/storm/wifi_calibration.c#69
These paths have changed in recent kernels, so we need to adapte.
The CONFIG_GOOGLE_VPD kernel module (provided by kmod-google-firmware)
is present on OnHub, and provides alternative means to locate this
information, in /sys/firmware/vpd/ro/wifi_base64_calibration{0,1,2}. Use
that instead.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20477
Signed-off-by: Robert Marko <robimarko@gmail.com>
a33d59f7af (2025-10-14) restored dts files for kernel 6.6 to files-6.6
after the preceding 15fa59c41f moved files-6.6 to files-6.12 to be
used by the new testing kernel, 6.12. This restoration omitted
1a3f05eb2b (2025-10-08), which fixed important aspects of the wifi
device definitions in qcom-ipq8064-eax500.dtsi and
qcom-ipq8064-unifi-ac-hd.dts.
The 1a3f05eb2b fix persisted into the 6.12 dts files. This change now
restores it for 6.6. Note that ipq806x is currently using kernel 6.6 for
most purposes, as 6.12 is only in testing status for this target.
This change was prepared with `git diff
a33d59f7af8f:target/linux/ipq806x/files-6.6
15fa59c41f0d^:target/linux/ipq806x/files-6.6`. This identified
c186d17fa5 (2025-10-08) as another change that was not present in the
restored files-6.6, but it has since been superseded by 2a709d108e
(2025-10-20), so no action is necessary to restore it. There were no
diffs present between these revisions in config-6.6 or patches-6.6,
which were also moved and restored in the 6.12 bring-up.
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Cc: Shiji Yang <yangshiji66@outlook.com>
Cc: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20464
Signed-off-by: Robert Marko <robimarko@gmail.com>
The SPI chip select GPIO polarity is active low by default. We must
use "spi-cs-high" dts property to toggle the polarity. The polarity
on "cs-gpios" won't take effect at all[1]. Fix these incorrect GPIO
polarities to silence the kernel warnings.
[1] Refer to Linux/Documentation/devicetree/bindings/spi/spi-controller.yaml
```
device node | cs-gpio | CS pin state active | Note
================+===============+=====================+=====
spi-cs-high | - | H |
- | - | L |
spi-cs-high | ACTIVE_HIGH | H |
- | ACTIVE_HIGH | L | 1
spi-cs-high | ACTIVE_LOW | H | 2
- | ACTIVE_LOW | L |
Notes:
1) Should print a warning about polarity inversion.
Here it would be wise to avoid and define the gpio as
ACTIVE_LOW.
2) Should print a warning about polarity inversion
because ACTIVE_LOW is overridden by spi-cs-high.
Should be generally avoided and be replaced by
spi-cs-high + ACTIVE_HIGH.
```
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19845
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Adapt OPP patch with upstream changes to cpufreq driver. Use the krait
compatible and the new opp-supported-hw way instead of deleting nodes.
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The 6.12 testing kernel for ipq806x target is ready now.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
- Reuse the bridges node defined on "qcom-ipq8064.dtsi".
- Rename PCIe device nodes to unified "wifi@0,0".
- Add the missing "qcom,ath10k" compatibles.
- Remove unseless property "interrupt-controller". There are no
consumers use these PCIe devices as interrupt controllers.
- Change bus number from 0 to 1, just like other ipq806x devices.
The valid PCIe bus range on this platform is 1 - 255.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add bridge node labels so that we can insert PCIe peripheral nodes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Copy patches and kernel configs from 6.12 kernel to restore the
default 6.6 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is a preparation for 6.12 kernel support. It can help us
track the patches and Kconfig history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is a preparation for introducing the 6.12 kernel support.
All configs are automatically refreshed. In theory, they will
generate the same .config files in the kernel build directory
as before.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18989
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The latter is more descriptive in terms of what's going on.
Mostly found with
git grep gpios\ | grep 0\>
git grep gpios\ | grep 1\>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20116
Signed-off-by: Robert Marko <robimarko@gmail.com>
In the conversion to nvmem of eax500 and unifi-ac-hd, the address was
set to 0 as is the case with most platforms, but not this one.
The wifi node also needs to be wrapped in a bridge node.
Matches every other device in ipq806x.
Fixes: 148f82ad45 ("ipq806x: use nvmem for wifi mac")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20325
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ath9k documentation says to use pci168c strings for the compatible
string, probably because the OWL loader uses it to overide bogus pci IDs
like abcd. This is not the case with ath10k and the documentation
explicitly states to use qcom,ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18920
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit changes LAN1 to be WAN and LAN2 to be LAN, like all other
dual port Extreme Networks devices.
This partially reverts commit 84a489b7cf
Signed-off-by: Christian Schmidbauer <github@grische.xyz>
Fixes LAN LED "1" to show activity of LAN1 and LAN LED "2" to show
activity of LAN2, not vice versa.
Signed-off-by: Christian Schmidbauer <github@grische.xyz>
QCOM SPI NAND driver got merged upstream hence we can drop the special
patch from qualcommax and qualcommbe target and move them to the generic
backports directory to reduce patch maintenance.
While at it refresh any affected patch and target and also backport other
minor fixup for the SPI NAND driver merged upstream later.
Link: https://github.com/openwrt/openwrt/pull/17788
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
