Add callbacks to intercept WPS M7 reception (registrar side) and M8
reception (enrollee side), allowing external code to inject extra
encrypted attributes and optionally skip credential building.
On the registrar side, the m7_rx callback receives the decrypted M7
content and can return extra data to include in M8's encrypted settings
as well as a flag to skip credential generation.
On the enrollee side, add a wps_set_m7 method to set extra encrypted
data for M7, and a m8_rx callback to handle the decrypted M8 content
externally.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a ucode API to hostapd and wpa_supplicant for external DPP frame
handling. This allows an external controller to intercept DPP frames
and handle the DPP protocol externally.
The API provides:
- RX callbacks (dpp_rx_action, dpp_rx_gas) called when DPP frames are
received, allowing external handling before internal processing
- TX methods (dpp_send_action, dpp_send_gas_resp/dpp_send_gas_req) for
transmitting DPP frames
- A ubus channel-based API (dpp_channel) for bidirectional communication
with exclusive hook registration per interface
- CCE control for hostapd (set_cce method)
The wpa_supplicant API mirrors hostapd but adapted for STA role:
- Uses tx_gas_req instead of tx_gas_resp
- GAS RX provides full frame instead of parsed query
- No CCE control (AP-only feature)
Both implementations include:
- Timeout handling with automatic channel disconnect after 3 failures
- Hook cleanup on interface removal
- Last-caller-wins semantics for hook registration
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a status method to both hostapd and wpa_supplicant ubus objects
that lists all configured interfaces with their wiphy, MAC address,
and running/pending state. For MLO interfaces, links are grouped
under a single entry with per-link status.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The function was using phydev.name (e.g., "phy0.0") instead of
phydev.phy (e.g., "phy0") when calling wpa_supplicant.phy_set_macaddr_list.
This is inconsistent with all other wpa_supplicant ubus calls in the same
file which correctly use phydev.phy.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Assign the address at wdev create time, similar to legacy interfaces.
Reported-by: Michael-cy Lee (李峻宇) <Michael-cy.Lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This allows wpa_supplicant to process pending netlink socket messages
first. Without this change, there is a race condition where the newly
created interface processes netlink events from the removal of the
previous interface.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This makes it possible to have more flexible control over the supplicant
without having to install wpa_cli.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Interface might be down or scanning. Better do a full restart in order to avoid
messing up the runtime state.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not allow hostapd phy state update to bring up links as long between mld_set
and mld_start calls. Configuration on other PHYs could still be pending.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Bring up AP interfaces, even if no frequency update was provided.
Fixes bringup when a MLO STA on the same radios connects to fewer links
than available, or to a non-MLD AP.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Removing the last remaining link from an MLD AP interface removes the
interface as well. Re-create the interface if necessary on config changes.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Can also be used for a client mode interface that is able to connect on
multiple bands individually, while handling hostapd state for the correct
band.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Execute scripts in /etc/rc.wps until one of them returns a exit code of 0.
Split up sta and ap handling of wps into separate scripts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MLO interface config is provided in a separate ubus call before
adding regular per-phy interfaces.
Preparation for full MLO support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Currently, logging level of the RADIUS server is a constant corresponding
to the highest verbosity (EXCESSIVE, ALL), but when running as a system
service, the output is discarded.
This commit makes logging verbosity configurable by `log_level` option
and redirects all logs to `logd`. Possible levels are defined in hostap
sources:
https://w1.fi/cgit/hostap/tree/src/utils/wpa_debug.h?id=012a893c469157d5734f6f33953497ea6e3b0169#n23
Their reference is inlined in `radius.config` file.
Default value for logging verbosity is INFO (even if the `-l` flag isn't
specified).
Signed-off-by: Dávid Benko <davidbenko@davidbenko.dev>
Link: https://github.com/openwrt/openwrt/pull/18089
Signed-off-by: Robert Marko <robimarko@gmail.com>
Even though IPv6 support for hostapd RADIUS server is implemented
(flag `-6`), it's not possible to enable it from configuration.
This commit adds this option and adapts init script.
Signed-off-by: Dávid Benko <davidbenko@davidbenko.dev>
Link: https://github.com/openwrt/openwrt/pull/18089
Signed-off-by: Robert Marko <robimarko@gmail.com>
access to undeclared variable radio In [anonymous function](), file /usr/share/hostap/hostapd.uc, line 830, byte 45:
Signed-off-by: Florian Maurer <f.maurer@outlook.de>
Initial support for dynamic reload of RxKHs.
In order to check if RxKHs need reloading.
RxKHs defined in the rxkh_file first has to be parsed and formated,
the same way as hostapd will read from the file and also output,
with the command GET_RXKHS.
Then each list of RxKHs can be hashed and compared.
Ucode implementation of hostapds rkh_derive_key() function.
Hostapd converts hex keys with 128-bits or more when less than 256-bits
to 256-bits, and truncates those that are more than 256-bits.
See: https://w1.fi/cgit/hostap/commit/hostapd/config_file.c?id=245fc96e5f4b1c566b7eaa19180c774307ebed79
Signed-off-by: Sybil127 <sybil127@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Regarding SAE support in wifi-station:
Important Note: Unlike PSK wifi-stations, both `mac` and `key` options are required
to make it work. With PSK, hostapd used to perform a brute-force match to find which
PSK entry to use, but with SAE this is infeasible due to SAE's design.
When `mac` is omitted, it will allow any MAC address to use the SAE password if it
didn't have a MAC address assigned to it, but this could only be done once.
The last wildcard entry would be used.
Also, unlike "hostapd: add support for SAE in PPSK option" (commit 913368a),
it is not required to set `sae_pwe` to `0`. This gives it a slight advantage
over using PPSK that goes beyond not needing RADIUS.
Example Configuration:
```
config wifi-vlan
option iface default_radio0
option name 999
option vid 999
option network management
config wifi-station
# Allow user with MAC address 00:11:22:33:44:55 and matching
# key "secretadminpass" to access the management network.
option iface default_radio0
option vid 999
option mac '00:11:22:33:44:55'
option key secretadminpass
config wifi-vlan
option iface default_radio0
option name 100
option vid 100
option network guest
config wifi-station
# With SAE, when 'mac' is omitted it will be the fallback in case no
# other MAC address matches. It won't be possible for a user that
# has a matching MAC to use this network (i.e., 00:11:22:33:44:55
# in this example).
option iface default_radio0
option vid 100
option key guestpass
```
Regarding PSK file creation optimization:
This patch now conditionally runs `hostapd_set_psk_file` depending on `auth_type`.
Previously, `hostapd_set_psk` would always execute `hostapd_set_psk_file`, which
would create a new file if `wifi-station` was in use even if PSK was not enabled.
This change checks the `auth_type` to ensure that it is appropriate to parse the
`wifi-station` entries and create those files.
Furthermore, we now only configure `wpa_psk_file` when it is a supported option
(i.e., psk or psk-sae is used). Previously, we used to configure it when it was
not necessary. While it didn't cause any issues, it would litter `/var/run` with
unnecessary files. This patch fixes that case by configuring it depending on the
`auth_type`.
The new SAE support is aligned with these PSK file changes.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/17145
Signed-off-by: John Crispin <john@phrozen.org>
The internal hostapd version cannot be built with EAP-pwd support, so
enable it only for the SSL variants.
Fixes: #17163
Fixes: 6365316fab ("hostapd: add ubus support for wired driver")
Link: https://github.com/openwrt/openwrt/pull/17164
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use and alternate ubus object when the config contains "driver=wired". This
commit is in preparation of the ieee8021x-wired daemon.
Signed-off-by: John Crispin <john@phrozen.org>
Supports reading the same parameters currently being used by iwinfo.
Preparation for replacing iwinfo with a rewrite in ucode.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This can happen if the bridge or a stacked vlan device gets recreated.
Ensure that hostapd sees the change and handles it gracefully.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
