* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit f6e7225039)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Mark some functions as static.
* Include function prototypes header file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit b219c749b7)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These functions return the register memory addresses. Usually
they are fixed values, hence I think it's safe to remove the
qualifier "volatile".
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit c3cb6a8725)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Convert .remove to .remove_new so that it can be compatible with
both 6.6 and 6.12 kernels.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 0d045a287a)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
PCI_IRQ_LEGACY was renamed to PCI_IRQ_INTX for kernel 6.10. Fix
compilation error:
/home/db/owrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/vrx518_ep-2.1.0/ep.c:469:69: error: 'PCI_IRQ_LEGACY' undeclared (first use in this function); did you mean 'NR_IRQS_LEGACY'?
469 | err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
| ^~~~~~~~~~~~~~
| NR_IRQS_LEGACY
Signed-off-by: Andre Heider <a.heider@gmail.com>
Co-authored-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit e80dfdb6c5)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Building against recent kernel versions (noticed with 6.12) and -Werror
can fail because a macro MAX(a,b) is already defined in minmax.h or
kernel.h before 5.10.
Initially noticed on 6.12, but it now happens after the kernel bump to
6.6.109 as well (upstream commit 6183c65)
In file included from ../mwlwifi-2025.02.06~db97edf2/hif/fwcmd.h:23,
from ../mwlwifi-2025.02.06~db97edf2/core.c:25:
../mwlwifi-2025.02.06~db97edf2/hif/hostcmd.h:1124: error: "MAX" redefined [-Werror]
1124 | #define MAX(a, b) (((a) > (b)) ? (a) : (b))
| ^~~
In file included from usr/include/mac80211-backport/linux/minmax.h:4,
from ./include/linux/kernel.h:27,
from usr/include/mac80211-backport/linux/kernel.h:3,
from ./include/linux/skbuff.h:13,
from usr/include/mac80211-backport/linux/skbuff.h:3,
from ./include/linux/if_ether.h:19,
from usr/include/mac80211-backport/linux/if_ether.h:3,
from ./include/linux/etherdevice.h:20,
from usr/include/mac80211-backport/linux/etherdevice.h:3,
from ../mwlwifi-2025.02.06~db97edf2/core.c:18:
./include/linux/minmax.h:315: note: this is the location of the previous definition
315 | #define MAX(a, b) __cmp(max, a, b)
| ^~~
Add a pending upstream patch which replaces the MAX(a,b) macro to avoid
conflicts and allow compilation with 6.12 backports
(cherry picked from commit 822bceb1d1)
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20420
Signed-off-by: Robert Marko <robimarko@gmail.com>
This includes the following commits from upstream Linux between 6.12.44
and 6.12.52:
```
$ git log --reverse --oneline v6.12.44...v6.12.52 -- drivers/net/wireless/ net/mac80211/ net/wireless/
5b7ae04969f8 wifi: cfg80211: fix use-after-free in cmp_bss()
3e789f8475f6 wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work
d9f2fb6a2ac8 wifi: mt76: mt7925: fix locking in mt7925_change_vif_links()
1fb26fd3f601 wifi: mt76: prevent non-offchannel mgmt tx during scan/roc
2aef3667e6b0 wifi: mt76: free pending offchannel tx frames on wcid cleanup
e4d5a5fc61fd wifi: mt76: fix linked list corruption
c2e32ac3f107 wifi: iwlwifi: uefi: check DSM item validity
609a8ffff5a0 wifi: ath11k: fix group data packet drops during rekey
cedbbba8a8e8 wifi: cw1200: cap SSID length in cw1200_do_join()
92bedee7168d wifi: libertas: cap SSID len in lbs_associate()
31229145e6ba wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
06616410a3e5 wifi: mwifiex: Initialize the chan_stats array to zero
a001c2f6a40c wifi: mt76: mt7925u: use connac3 tx aggr check in tx complete
eefa2ad9009b wifi: mt76: mt7996: Initialize hdr before passing to skb_put_data()
089fd41902ee wifi: mt76: mt7925: fix the wrong bss cleanup for SAP
26618c039b78 wifi: ath11k: update channel list in reg notifier instead reg worker
fa4abd439f27 wifi: ath11k: update channel list in worker when wait flag is set
2203ef417044 wifi: wilc1000: avoid buffer overflow in WID string configuration
32adb020b0c3 wifi: mac80211: increase scan_ies_len for S1G
8df33f4d4a0b wifi: mac80211: fix incorrect type for ret
79dc6d4932de wifi: virt_wifi: Fix page fault on connect
1f52119809b7 wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
895cccf639ac wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
914d02595ba6 wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188
1713796d6538 wifi: rtl8xxxu: Don't claim USB ID 07b8:8188
```
Removed ath11k/940-ath11k-Revert-clear-the-keys-properly-when-DISABLE_K.patch
This problem is fixed by:
609a8ffff5a0 wifi: ath11k: fix group data packet drops during rekey
Link: https://github.com/openwrt/openwrt/pull/20311
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
OpenSSL 3.0.18 is a security patch release. The most severe CVE fixed in this
release is Moderate.
This release incorporates the following bug fixes and mitigations:
* Fix Out-of-bounds read & write in RFC 3211 KEK Unwrap. (CVE-2025-9230)
* Fix Out-of-bounds read in HTTP client no_proxy handling. (CVE-2025-9232)
The removed patch is included upstream:
c0d968f0ac
Link: https://github.com/openwrt/openwrt/pull/20312
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a smart door lock device equipped with OpenWrt 14.07 OEM
modified version Qdwrt
The OEM has closed down, This commit is intended to maximize the
remaining value of these devices. It can flash OpenWrt to become
an AP
Specification:
- SoC: MediaTek MT7628NN
- Flash: 8 MB
- RAM: 64 MB
- Power: DC 5V - 25V
- Ethernet: 1 x RJ45 (10/100 Mbps)
- Wireless radio: 802.11n 2.4g-only
- On-Board LED:
Status 1: GPIO/43 active-low
Status 2: GPIO/44 active-low
Power: AlwaysOn
- Button:
WPS / RESET: GPIO/14 active-low
- Bluetooth: CC2541 via UART1 (ttyS1) and GPIO/26-29
- RFID: MF RC522 on I2C@28
- RTC: DS1339 on I2C@68
- Shell (via CON1 cable)
- LED (Swipe card area):
- Green GPIO/3 active-high
- Red GPIO/11 active-high
- Matrix keypad: (active-low)
GPIO/20 GPIO/21 GPIO/19 (Rows)
GPIO/24 1 2 3
GPIO/25 4 5 6
GPIO/22 7 8 9
GPIO/23 BACK 0 ENTER
(Cols)
- UART: 1 x UART on PCB - 57600 8N1
- GPIO Relay: GPIO/42 active-high
- GPIO Buzzer: GPIO/15 active-high
Warning:
The original firmware does not use the device tree.
This device tree is written based on the content of /sys/devices/platform
and has been tested
Note:
- On the device, matrix keypad rows actually are columns, and the columns actually are rows
- The key code of the CLEAR key of the matrix keypad is BACK in the original firmware.
Issue:
- No drivers in mainline kernel for RFID and Bluetooth.
Flash Instruction:
Using SSH/Telnet:
1. Connect the board to the computer via RJ45 Ethernet
2. Login 10.10.10.1 with root password "szqdingnet123" (SSH Port 22, Telnet Port 9900)
3. Download openwrt firmware on the computer.
4. Setup a http server on computer. And use wget download openwrt firmware from computer
5. Use command "mtd -r write openwrt-ramips-mt76x8-qding_qc202-squashfs-sysupgrade.bin firmware"
to flash
Using U-Boot WebUI:
1. Configure PC with a static IP address 10.10.10.2/24.
2. Open http://10.10.10.1
3. Use "mkqdimg -B qc202 -f openwrt-ramips-mt76x8-qding_qc202-squashfs-sysupgrade.bin" to
make image.
4. Upload factory.bin via U-Boot WebUI.
Original Firmware Dump / More details:
https://blog.gov.cooking/archives/research-qianding-smart-locker-and-flash.html
Original U-Boot firmware image tools:
https://gitlab.com/CoiaPrant/mkqdimg
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Coia Prant <coiaprant@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17471
(cherry picked from commit b2f814fed4)
Link: https://github.com/openwrt/openwrt/pull/20159
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport support for 1024 MPDU TX aggregation in EHT from upstream
kernel. Without this fix, TX performance on WiFi-7 links
is severely limited, making the link practically unusable.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
Make sure that the package gets updated after the last fix.
Fixes: 9d83c1b1a9 ("uqmi: fix data-format parsing")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 0203ef3fc9)
wda-get-data-format now returns an object instead of a single string.
Account for this change when reading the packet data format.
Suggested-by: Sebastian Ertz (https://github.com/sebastianertz)
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit cd20ae44f2)
PKG_MAKE_FLAGS is required when compiling r8168-rss
Signed-off-by: Andy Chiang <AndyChiang_git@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20001
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 5719d65064)
gettext-full only provides libintl which is not licensed under
GPL-3.0.-or-later but under LGPL-2.1-or-later as stated in
gettext-runtime/intl/COPYING.LIB
Fixes: c10d97484a (Add more license tags with SPDX identifiers)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19943
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 13e10bb8d3)
elfutils libraries are not licensed under GPL-3.0-or-later, they are dual
licensed: GPL-2.0-or-later OR LGPL-3.0-or-later as clearly stated in
source files as well as on https://sourceware.org/elfutils:
The libraries and backends are dual GPLv2+/LGPLv3+. The utilities are GPLv3+.
Fixes: b98fb76646 (elfutils: import package from packages.git)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19941
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9a157b5d83)
The version of libxml2 was bumped from 2.13.6 to 2.14.5. Since version
2.14, libxml2 is not binary compatible with older versions. Therefore
add an abi version.
From the NEWS file:
Binary compatibility is restricted to versions 2.14 or newer. On ELF
systems, the soname was bumped from libxml2.so.2 to libxml2.so.16.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
Link: https://github.com/openwrt/openwrt/pull/19983
(cherry picked from commit 420be05d90)
Link: https://github.com/openwrt/openwrt/pull/19985
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Radxa ROCK 4SE[1] is a single board computer using the Rockchip
RK3399-T.
Hardware
--------
- Dual-core Cortex-A72 and quad-core Cortex-A53 CPU
- Mali-T860MP4 GPU
- LPDDR4 4GB RAM
- M.2 M Key slot (PCIe 2.1 x4)
- eMMC connector
- microSD card slot
- Wi-Fi 5 (not supported)
- Gigabit Ethernet with PoE support (additional PoE HAT required)
- USB 3.0 Type-A OTG port
- USB 3.0 Type-A HOST port
- 2x USB 2.0 Type-A HOST ports
- USB Type-C power port (5V only)
- 40 Pin GPIO header
[1] https://radxa.com/products/rock4/4se
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to the micro SD card or
internal eMMC using dd.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/17554
(cherry picked from commit 6690f551c8)
Link: https://github.com/openwrt/openwrt/pull/19940
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Radxa ROCK 4C+[1] is a single board computer with dual HDMI using
the Rockchip RK3399-T.
Hardware
--------
- Dual-core Cortex-A72 and quad-core Cortex-A53 CPU
- Mali-T860MP4 GPU
- LPDDR4 4GB RAM
- eMMC connector
- microSD card slot
- Wi-Fi 5 (not supported)
- Gigabit Ethernet with PoE support (additional PoE HAT required)
- USB 3.0 Type-A OTG port
- USB 3.0 Type-A HOST port
- 2x USB 2.0 Type-A HOST ports
- USB Type-C power port (5V only)
- 40 Pin GPIO header
[1] https://radxa.com/products/rock4/4cp
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to the micro SD card or
internal eMMC using dd.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/17554
(cherry picked from commit 18925614c0)
Link: https://github.com/openwrt/openwrt/pull/19940
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
8b320f9 ucode: adjust for new ext resource type
e61d2be sys: use strstr() to detect installed packages
bba9519 rpc-sys: packagelist: don't truncate input lines on read
The removed patch was applied upstream.
Link: https://github.com/openwrt/openwrt/pull/19919
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
