Release Notes:
https://github.com/madler/zlib/blob/v1.3.2/ChangeLog
We also switch package tarball source to GitHub repository releases
to avoid package hash mismatch after the zstd upgrade.
The 005-* patch was suppressed by the upstream commit 15ba5055a935
("CMake: Adapt pkgconfig-file to the GnuInstallDirs layout.")
This patch also adjust the zlib.pc file path as it was changed in
the latest release.
The mipsel_24kc 'zlib' package size will increase by about 1 kB.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is no point in printing the missing M3 memory dump adress message
on each boot under the warning level, as not all boards need it at all.
So, degrate it to a debug print with QMI mask.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Originally, the .compatible string for EAP623-Outdoor HD tried to
shorten the "-outdoor" to "od". However, this naming was inconsistent
with the existing "eap610-outdoor". As "od" is not a common shorthand,
spell out the complete word: "eap623-outdoor-hd-v1".
Fixes: 5dbf93c8c5 ("ipq60xx: add support for TP-Link EAP623-Outdoor HD v1")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
* e3f6a41 main: exit 1 when showing the usage
* b17c31f main: exit 1 on getopt() errors
* e086664 lexer: fix a minor memleak in jp_get_token()/match_token()
* e5a07f4 main: defer processing until options are processed
* afe72ad main: usage spell fixes
Signed-off-by: Paul Spooren <mail@aparcar.org>
58eb263 instance: don't print error in case cgroups are disabled
9baf019 instance: use positive error numbers for strerror()
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This adds kernel packages for the Microchip KSZ9477 switch family.
The core package has a target specific dependency as the ksz9477
driver enables DCB which grows the kernel size and can negatively
impact other targets.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/22257
Signed-off-by: Robert Marko <robimarko@gmail.com>
Makes it clear that the allocation is dealing with a flex array member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21960
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is nearly identical to what landed in ath-next for v7.1, aside from
resolving a couple conflicts. A separate patch has been added to replace
CONFIG_THERMAL with CPTCFG_ATH12K_THERMAL so the setting may be enabled
via menuconfig (as is done with ath10k and ath11k).
Note that at this stage, throttling has not been implemented upstream,
hence the slight change in wording versus existing options.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22280
Signed-off-by: Robert Marko <robimarko@gmail.com>
22fb70661799 fix flex array not at end of struct
6a5c4716ca25 convert memcpy + ETH_GSTRING_LEN to ethtool_puts
Signed-off-by: Robert Marko <robimarko@gmail.com>
a52cdb354d13 dns: validate IPv4 record addresses
b798c24205b5 dns: validate IPv6 record addresses
a3dcb4adc635 dns: validate reverse dns query name lengths
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
This commit adds support for Gemtek (Centurylink/Lumen/Quantum Fiber)
W1700K.
Device specification
--------------------
SoC Type: Airoha AN7581
RAM: ESMT M16U8G16512A (2GB)
Flash: Winbond 25N04KVZEIR (512MB)
Ethernet: 2x gigabit via AN7581, 2x 10g via RTL8261N
Wi-Fi: MT7996 - BE19000
LEDs: 1 LED, power/status
Button: Reset
USB ports: None
Bootloader: U-Boot 2014.04-rc1 (Jun 12 2024 - 08:14:34) AXON 2.0
Fan: 1x controlled by Nuvoton NCT7511Y
This device is pretty useless with the stock firmware as it requires an
account to completely set it up. Additionally, the vendor bootloader is
signed and uses Airoha/Mediatek's BBT/BMT for bad block management on
the flash. It does not support UBI, thus kernel updates are subject to
BMT/BBT which OpenWrt does not support. In turn, if a kernel update
happens and a block is marked bad in the process, the device will fail
to boot and will need to be recovered via serial.
The workaround is to chainload U-Boot in place of the kernel, as it
should not need frequent updates and thus should not cause BBT/BMT to
misbehave and soft-brick the device. Upstream U-Boot supports loading
a FIT image from UBI, so we create a UBI partition for the new u-boot
env, FIT image and factory data. This way, bad blocks are managed by UBI
instead, which will not soft-brick the device should a block be marked
bad during a normal OpenWrt update. Users wishing to update U-Boot can
do so, but should be prepared to recover if a block goes bad.
Because the device is not useful with stock firmware, this is a one-way
ticket for most users and reverting will not be documented.
The following steps can be used to install OpenWrt on the W1700K.
Connect to serial console. There is a Torx T10 screw underneath the QR
code printed onto the label. Then, pry between the gray and white
plastic, starting by the ports on the back. There are clips arount the
entire device. Starting closest to the screw next to the UART header,
TX - GND - VCC - N/A - RX. The bootloader can be interrupted by
pressing any key.
Configuring Vendor Bootloader and Installing U-Boot Chainloader:
The bootloader's default bootcmd will only run a signed image. However,
we can still bootm our own image from flash.
NOTE: The vendor's ethernet drivers are flaky. You may have to reboot
and try the tftpboot part several times for it to work.
- setenv one flash read 0x600000 0x1000000 \$loadaddr
- setenv two "; bootm"
- setenv bootcmd "$one$two"
- setenv one
- setenv two
- saveenv
- setenv serverip 192.168.1.10; setenv ipaddr 192.168.1.1; tftpboot
0x89000000 openwrt-airoha-an7581-gemtek_w1700k-ubi-chainload-uboot.itb
- flash erase 0x600000 0x100000
- flash write 0x600000 0x100000 0x89000000
- reset
The device will now reboot into the U-Boot chainloader.
Loading the W1700K UBI Installer:
The installer can be downloaded at
https://github.com/hurrian/w1700k-ubi-installer/releases
- Boot the installer via the TFTP option in the U-Boot menu. This
process is automatic, though you may be prompted to answer some
questions.
- Once it is done, you may upgrade to your preferred build.
- For more information: https://github.com/hurrian/w1700k-ubi-installer
For those wishing to explore the stock firmware:
Rooting Stock FW (for making backups, recommended):
- Boot the router and watch serial console until presented with failsafe
mode. Enter it (f + enter).
- mount_root
- Change the root password (passwd).
- Open /etc/config/axon_platform_manager and set sshServerEnable,
localAccessEnable and remoteAccessEnable to 1.
- Search for "SSH". You'll find a long string with 3 matches such as
Enabled%25252c1%25252cSSH%Drop. Change any instances of "Disabled"
preceding SSH to "Enabled" and any instances of "Drop" to "Accept"
that follow SSH. Same for "Local SSH" and "Remote SSH".
- Set /etc/config/dropbear to:
config dropbear
option PasswordAuth 'on'
option RootPasswordAuth 'on'
option Port '22'
- Reboot.
- Connect 10g WAN port to existing network and SSH in with the password
you set.
- SSH into rooted stock fw.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17869
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
When the virtual package "uci-firewall" is installed, the choice
between "firewall" and "firewall4" is arbitrary, sometimes resulting
in one, sometimes the other.
Set the default variant on "firewall4" to make it the preferred
package when installed as a dependency.
Link: https://forum.openwrt.org/t/owut-openwrt-upgrade-tool/200035/1126
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22328
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Instead of directing users to the useless 'man 8 apk', we direct
them to the wiki help page.
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22271
Signed-off-by: Robert Marko <robimarko@gmail.com>
Allow reinstalling already-installed packages without a version change.
Only the named packages are reinstalled, not their dependencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hardware
========
SoC: Qualcomm IPQ4018
ETH: Qualcomm QCA8075 (2 x RJ-45)
WDG: OnSemi SCT706
RAM: Micron MT41K128M16JT-125 (256MB)
NOR: Infineon S25FL512S (64MB)
Installation
============
1. Create a ramboot-able image with the command
{ dd if=/dev/zero bs=32 count=1 2>/dev/null; \
cat openwrt-ipq40xx-generic-huawei_ap4050dn-initramfs-uImage.itb; \
} > ramboot.bin`
2. Start a TFTP server in the folder with the ramboot.bin.
3. Plug in a USB-RJ45 serial adapter to the CONSOLE port of the device
and start a serial console session with
9600 baud, no parity, 1 stop bit.
4. Plug in either 12V power or PoE to the device.
5. On the prompt `Press f or F to stop Auto-Boot in 3 seconds`,
press `f` to enter the Huawei U-Boot command line
6. Enter a new password for the u-boot command line
7. In the command line, run these commands to ramboot OpenWrt:
setenv serverip <IPv4 address of TFTP server>
setenv ipaddr <IPv4 address for this AP>
setenv rambootfile ramboot.bin
run ramboot
8. In OpenWrt, set up the network and then `scp` the files
`u-boot-huawei_ap4050dn/uImage` and
`openwrt-ipq40xx-generic-huawei_ap4050dn-squashfs-sysupgrade.bin`
into `/tmp/`
9. To backup the original firmware, run the following:
cat /dev/mtd12 /dev/mtd13 > huawei_ap4050dn_fw_backup.bin.bin
10. Run the following commands to flash u-boot and OpenWrt to the device:
mtd erase uboot
mtd write /tmp/uImage uboot
sysupgrade -n /tmp/openwrt-ipq40xx-generic-huawei_ap4050dn-squashfs-sysupgrade.bin
11. The device should now boot OpenWrt! (sometimes the boot process takes a bit
longer due to the watchdog resetting the device before the watchdog driver runs)
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
Add support for the Huawei AP4050DN. Due to vendor bootloader size
limitations, we require a second-stage U-Boot.
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
memcpy() with overlapping src and dest buffers is an undefined behavior
in C. In the current code, a ConfRej response is generated by copying
input data in-place, where the dest address is lower than the src.
This happens to work in practice because memcpy() forward-copies data,
matching the behavior of memmove() in this case.
However, if FORTIFY_SOURCE or Address Sanitizer is enabled, memcpy()
will detect the overlap at run time and abort the program.
Replace the memcpy() with memmove() to ensure a well-defined behavior.
Reported-by: Filippo Carletti <filippo.carletti@gmail.com>
MRU patch https://github.com/ppp-project/ppp/pull/573
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22286
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Embed gpio_led struct in ath_led. Simpler Allocation.
Use a flex array for the name. Allows using a single allocation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21933
Signed-off-by: Robert Marko <robimarko@gmail.com>
ath79 at this point supports no ath5k devices.
The only targets with ath5k usage are bcm47xx, ixp4xx, and lantiq.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19848
Signed-off-by: Robert Marko <robimarko@gmail.com>
The single user of the downstream gpio-cascade driver has been switched
to use the upstream gpio-line-mux driver. Thus, we can drop the former
now.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22206
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add the GPIO line mux driver as a kernel module for selected usage by
devices.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22206
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for Richtek RTQ6056 Current and Power Monitor ADC.
RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
compatible interface, and the device provides full information for
system by reading out the load current and power.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add a label to the spi node to allow device trees to reference it
(i.e. to mark status = "okay").
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Link: https://github.com/openwrt/openwrt/pull/22151
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Due to issues surrounding the implementation of the vendor BMT/BBT
on Airoha, upstream ATF + uboot has switched to UBI flash partitions.
However, some devices shipped on this platform are bootloader locked,
and thus it is impossible to replace ATF + uboot.
During testing for the Gemtek W1700K (#17869), sysupgrades from Linux
(which is unaware of the underlying BMT/BBT) would occasionally write
data into blocks which were remapped by the vendor uboot when it was
read on the following reboot, causing a soft brick.
An acceptable workaround [1],[2] was discussed where an intermediate
uboot would be written by the vendor uboot (which is aware of Airoha
BMT/BBT). This chainloader would then ignore the regions of flash
used by the vendor uboot, and store all relevant data inside of UBI.
UBI would then be used to handle bad block management. As the vendor
ATF + uboot do not read or interact with the UBI region, we would avoid
unwanted remaps from BMT/BBT.
This commit introduces support for building such a chainloader, by
packaging u-boot and DTS into a FIT image; to be flashed like a kernel.
Configuration for the Gemtek W1700K is provided as an example of how the
chainloader is used.
[1] https://github.com/openwrt/openwrt/pull/17869#discussion_r2836066746
[2] https://github.com/openwrt/openwrt/pull/17869#discussion_r2838395671
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
[ move FIP_COMPRESS to Build/Compile, wrap some long lines ]
Link: https://github.com/openwrt/openwrt/pull/22151
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
It is more accurate to describe the contents of the FIP as
compressed, instead of the FIP itself becoming compressed.
Update variable naming accordingly.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/22151
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
OpenWrt issue:
https://github.com/openwrt/openwrt/issues/16183
Problem summary:
On qualcommax (ipq60xx/ipq807x) with ath11k, monitor-mode captures contain
frames that are consistently longer than expected by 8 bytes.
The symptom is visible in pcap/radiotap captures, and Wireshark parsing
becomes correct after manually cutting these 8 bytes from captured frames.
This patch:
- Remove merge-stage FCS/tail manipulations in ath11k_dp_rx_mon_merg_msdus().
- add length fix in ath11k_dp_rx_mon_deliver(), trim 8 bytes right
before radiotap update and delivery to mac80211.
This targets monitor capture length correctness only and keeps the fix scoped
to the monitor RX delivery path.
Tested-on: ipq8072 yuncore,ax880; ipq6018 yuncore,ax840; yuncore,fap650
Signed-off-by: Ruslan Isaev <legale.legale@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22244
Signed-off-by: Robert Marko <robimarko@gmail.com>
Port drivers for the hardware true random number generator found in
MediaTek SoCs and enable them for all boards.
This has the side-effect of U-Boot now providing '/chosen/kaslr-seed'
to Linux which is required to enabled KASLR.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add support for Airoha EN7581/AN7583 NPU variant firmware present in
linux-firmware. The Airoha EN7581 NPU variant is to support devices
equipped with the MT7996 WiFi chip.
While at it also add an extra new line to follow pattern of double new line to
separate each firmware package.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The fs_wait_for_key function runs multiple background processes that all
try to delete the same temporary file ($keypress_wait) when they exit.
This creates a race condition where one process successfully deletes the
file while others fail with ENOENT.
Busybox rm only suppresses "file not found" errors during the initial lstat()
check, not during the actual unlink() call. This causes error messages in the
boot log even with rm -f:
rm: can't remove '/tmp/tmp.hKjPDH': No such file or directory
Fixed by redirecting stderr to /dev/null for rm calls in concurrent contexts.
This change does not affect functionality and only avoids confusing log
output during boot.
Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/22079
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Several OpenWrt-related fixes are included in this release.
Drop upstreamed patches and refresh the rest.
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
Link: https://github.com/openwrt/openwrt/pull/22240
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXqmiX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXmbimX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
The &pointer + 1 trick is a C89 trick to point to area allocated after
the size of the struct. We have struct_size and flex arrays now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22170
Signed-off-by: Robert Marko <robimarko@gmail.com>
This reverts commit c053b22573.
KSZ DSA driver is the only thing in the kernel selecting DCB support
instead of depending on it if required.
So, it will enable DCB support without asking and we do not want the
kernel size increase, as well as current Layerscape ARMv8 build failure.
So, revert this until its fixed upstream or worked around.
Signed-off-by: Robert Marko <robimarko@gmail.com>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
Specifications:
SOC: MT7986b
RAM: 512MB
Flash: 512 MB SPI NAND
Ports: 2 LAN 2.5Gbps (GPY211C)
WIFI: MT7976GN + MT7976AN
LED: 3 bicolor LED - 1 monocolor LED
Buttons: Reset and WPS
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Co-authored-by: Hal Martin <halmartin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18364
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Link: https://github.com/openwrt/openwrt/pull/18364
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
