Move the read/write functions to where they belong.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21274
Signed-off-by: Robert Marko <robimarko@gmail.com>
For all families the driver uses the same read/write functions.
Drop the duplicate per-family initialization.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21274
Signed-off-by: Robert Marko <robimarko@gmail.com>
Relocate the cpu port definition over to the new configuration
structure. There are several family specific places where the
driver checks port ranges. These are a wild mix of arbitrary
values (64) or constant defines. Remove them as the the central
read/write functions already have a proper check with -ENODEV
bail out in place.
With the cleanup drop the port defines as there is only one
consumer (config structure) left.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21274
Signed-off-by: Robert Marko <robimarko@gmail.com>
The mdio driver already has a family specific compatible that
is used in the dts to denote the device type. Nevertheless it
is not evaluated. The driver determines the family on its own
in rtmdio_get_family().
Break up this dependency by providing a configuration structure
that can be automatically assigned by device_get_match_data().
For now only move the rawpage variable over there.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21274
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ethernet and dsa drivers still rely on several defines from
the central mach include. Move important defines over to the
driver specific includes as a first decoupling step.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21263
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changes:
* use upstream patches for airoha-snfi driver
* update in kernel en7523 dts to add spinand support
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/21299
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add dual-partition upgrade support for Qihoo 360v6 using the generic
bootconfig.sh library. This enables safe system upgrades with automatic
failover capability.
The device uses Qualcomm's bootconfig structure to control A/B partition
switching. The bootloader dynamically maps physical NAND partitions to
logical MTD devices based on the bootconfig, ensuring firmware always
writes to the inactive partition.
Implementation details:
- Use bootconfig.sh library (copied from ipq50xx) for bootconfig operations
- Operate on 'rootfs' partition by name instead of hardcoded offset
- Add magic header validation for safety
- Remove OEM UBI volumes (wifi_fw and ubi_rootfs) before sysupgrade
- Toggle bootconfig before removing OEM volumes
Hardware details:
- SoC: Qualcomm IPQ6000
- Flash: NAND with dual rootfs partitions (mtd16/mtd17)
- Bootconfig: controls slot selection via partition name lookup
Installation:
Standard sysupgrade process. After upgrade, the system will boot
from the new partition while preserving the old system as backup.
The OEM volume cleanup is necessary because these volumes are created
by the stock firmware and are not automatically cleaned by the standard
nand_upgrade_prepare_ubi() function, which only removes volumes named
'kernel', 'rootfs', and 'rootfs_data'. Without this cleanup, the remaining
OEM volumes consume available space, causing the creation of rootfs_data
to fail during sysupgrade.
Tested on Qihoo 360v6 running stock firmware and OpenWrt.
Signed-off-by: Zhenyu Qi <qzydustin@hotmail.com>
Link: https://github.com/openwrt/openwrt/pull/21154
Signed-off-by: Robert Marko <robimarko@gmail.com>
The EW71v2 has the WAN port configured at eth1.
The printed label-mac is configured on this iface in openwrt.
Signed-off-by: Florian Maurer <f.maurer@outlook.de>
RTL930x devices have highmem starting address at 0x20000000.
The Linksys LGS328C highmem definition is wrongly shared with
the larger LGS352C RTL931x model and starts at 0x90000000.
Fix it by splitting the definition.
Fixes: 853d73f ("realtek: add support for Linksys LGS328C")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This reverts commit 423cda97f9.
It appears that this broke remoteproc on some devices, so revert for now.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hardware is identical to WRC-X3200GST3.
- SoC: MediaTek MT7622
- RAM: 512MB
- Flash: 128MB SPI-NAND
The -W suffix in the retail name (WRC-G01-W) denotes the casing color
and is omitted from the model name in the OpenWrt configuration to
maintain consistency with other Elecom devices.
Signed-off-by: Yuhei Amemiya <minihui@me.com>
Link: https://github.com/openwrt/openwrt/pull/21238
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Include XHCI USB drivers on the Cudy WR3000P v1 router, the drivers are
required to be able to use the USB port for USD devices.
Closes: https://github.com/openwrt/openwrt/issues/21231
Fixes: 04e9d154f2 ("mediatek: filogic: add support for Cudy WR3000P v1")
Signed-off-by: Dmitry Mostovoy <dmitry.mostovoy@ceifx.com>
Link: https://github.com/openwrt/openwrt/pull/21281
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This typo makes the script fail with:
-ash: /etc/hotplug.d/ieee80211/10_fix_wifi_mac: line 66: syntax error: unexpected word (expecting ")")
which ultimately prevents the mac address for certain devices wireless cards being set correctly
Signed-off-by: Nick French <nickfrench@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21287
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
ipq5018 do not support freq scaling and therefore stuck on 800Mhz
This patch allows CPU to run with 1.008 Ghz as designed
Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
Link: https://github.com/openwrt/openwrt/pull/21185
Signed-off-by: Robert Marko <robimarko@gmail.com>
Interrupt vector for reo2host-status is wrongly assigned.
Status interrupts weren't received and a workaround was applied to
mac80211 to periodically poll the reo status ring. Therefore, the
workaround can be removed with the proper hardware interrupt line
assigned.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21271
Signed-off-by: Robert Marko <robimarko@gmail.com>
Linksys MX6200 is a triband Wi-Fi 6E wireless router.
Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Nanya NT5CC256M16ER-EK (512 MiB DDR3-933)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
QCN6122 (2x2:2 6 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to:
- LAN Port: Internal IPQ5018 GE PHY
- WAN Port: Maxlinear Ethernet GPY115C PHY
* Flash: Macronix MX35UF2GE4AD (256 MiB)
* LEDs: 1x multi-color PWM LED
* Buttons: 1x WPS (GPIO 27 Active Low)
1x Reset (GPIO 28 Acive Low)
* FCC ID: 2AYRA-08436
Flash instructions:
************************************************************************
NOTE: serial access is required! Although the web UI allows you to
install the Openwrt image, secure boot is enabled which will prevent
booting an unsigned image. The boot sequence must be adjusted in U-boot
to allow booting unsigned images.
************************************************************************
1. On OEM firmware, login to the web UI (typically @ http://192.168.1.1)
and click 'CA' in the bottom right corner.
Then click -> Connectivity -> Manual Upgrade.
Alternatively, browse to
http://<router IP>/fwupdate.html.
Upload openwrt-qualcommax-ipq50xx-linksys_mx6200-squashfs-factory.ubi.
Continue with step 5.
2. Installation on alternate partition using serial connection from OEM
firmware (default login: root, password: admin):
flash_erase /dev/mtd19 0 0
nandwrite -p /dev/mtd19 openwrt-qualcommax-ipq50xx-linksys_mx6200-squashfs-factory.ubi
reboot
Continue with step 5.
3. Installation using serial connection from initramfs
setup tftp server listening on IP in 192.168.1.0/24 (other than the
router IP 192.168.1.1). In U-boot, load the initramfs image to memory:
tftp $loadaddr <your IP>:openwrt-qualcommax-ipq50xx-linksys_mx6200-initramfs-uImage.itb
boot the image using command:
bootm $loadaddr
when fully booted, scp the sysupgrade image to your router IP (default:
192.168.1.1):
scp -O <path>/openwrt-qualcommax-ipq50xx-linksys_mx6200-squashfs-sysypgrade.bin root@192.168.1.1:/tmp/
use sysupgrade to flash the image to nand:
sysupgrade -n -v /tmp/openwrt-qualcommax-ipq50xx-linksys_mx6200-squashfs-sysupgrade.bin
Continue with step 5.
4. Optionally install on alternate partition. From Openwrt:
mtd -r -e rootfs_1 -n write openwrt-qualcommax-ipq50xx-linksys_mx6200-squashfs-factory.ubi rootfs_1
Continue with step 5.
5. Setup U-boot for ability to dual boot signed (stock) and non-signed
(Openwrt) images with auto-detection.
From U-boot, run (be aware: copy line by line):
setenv setnandbootargs 'setenv bootargs init=/sbin/init ubi.mtd=rootfs rootfstype=squashfs rootwait'
setenv nandinitcmd 'setenv mtdids nand0=nand0; run setrootfscmd; ubi part rootfs 2048'
setenv setrootfscmd 'if test $boot_part = 1; then setenv mtdparts mtdparts=nand0:0x${imgsize}@0x${prikern}(rootfs); else setenv mtdparts mtdparts=nand0:0x${imgsize}@0x${altkern}(rootfs); fi'
setenv readhdr1cmd 'ubi read $loadaddr kernel 0x40; setexpr IMGOFF $loadaddr + 0x10; setexpr CODEOFF $loadaddr + 0x14; setexpr SIGOFF $loadaddr + 0x1c; setexpr CERTOFF $loadaddr + 0x24'
setenv readhdr2cmd 'setexpr.l HDR *$loadaddr; setexpr.l IMGSZ *$IMGOFF; setexpr.l CODESZ *$CODEOFF; setexpr.l SIGSZ *$SIGOFF; setexpr.l CERTSZ *$CERTOFF; setexpr TSIZE $CODESZ + $SIGSZ; setexpr TSIZE $TSIZE + $CERTSZ'
setenv testmbncmd 'if test $HDR -ne edfe0dd0 -a $IMGSZ -eq $TSIZE; then bootipq; else ubi read $loadaddr kernel $kernsize; run setnandbootargs; bootm $loadaddr; fi'
setenv bootcmd2 'if test $auto_recovery = no; then bootipq; else run nandinitcmd; run readhdr1cmd; run readhdr2cmd; run testmbncmd; fi'
setenv bootcmd 'run bootcmd2'
saveenv
6. Back to the OEM firmware.
Download firmware from OEM website:
MX6200: https://support.linksys.com/kb/article/408-en/
From serial/SSH, in Openwrt, flash OEM firmware to alternate partition:
mtd -r -e rootfs_1 -n write FW_MX6200_1.0.11.216041_prod.signed.img rootfs_1
Switching active partition:
1. From U-boot, executive the following to switch to partition 1:
setenv boot_part 1
for partition 2:
setenv boot_part 2
2. From Openwrt:
fw_printenv boot_part
In case it's 1:
fw_setenv boot_part 2
. /lib/upgrade/platform.sh
linksys_bootconfig_set_primaryboot "0:bootconfig" 1
linksys_bootconfig_set_primaryboot "0:bootconfig1" 1
In case it's 2:
fw_setenv boot_part 1
. /lib/upgrade/platform.sh
linksys_bootconfig_set_primaryboot "0:bootconfig" 0
linksys_bootconfig_set_primaryboot "0:bootconfig1" 0
and
reboot
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21038
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for upgrades on dual firmware Linksys devices with the
partition table stored in SMEM and that store both the kernel and rootfs
in a single partition. Switching the active boot partition requires
updating the partition info table in SMEM in addition to setting
the active boot partition in a U-boot variable as U-boot will keep them
in sync upon reboot if they're not.
U-boot always sets the name of the active partition to rootfs and that
of the inactive partition to rootfs_1 in SMEM. when Linux loads the
partition table from SMEM it will load the right partition based on the
offset set in the SMEM partition table. For upgrades, flashing to the
alternate partition will always be to rootfs_1, while flashing the
current partition will be on rootfs.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21038
Signed-off-by: Robert Marko <robimarko@gmail.com>
The BOOTCONFIG partition is used by Qualcomm's boot chain to store
metadata about the device's startup configuration. It contains info such
as versioning, configuration flags, primary boot partition, and more.
Newer devices with dual boot partitions not only store the active boot
partition in a U-boot variable but also in partition info in the
BOOTCONFIG partition. As such, add library functions to set and toggle
the active boot partition.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21038
Signed-off-by: Robert Marko <robimarko@gmail.com>
Move setting kernel bootargs from the base template down to the
respective Linksys board files. This allows for having devices which
require different bootargs use the base template device tree file.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21038
Signed-off-by: Robert Marko <robimarko@gmail.com>
The partition table on Linksys devices with a Qualcomm AX IPQ SoC is
stored in SMEM. As such, load partition table from SMEM rather than
statically defining them in their respective device trees. This helps
generalize the base template and requires less maintenance.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21038
Signed-off-by: Robert Marko <robimarko@gmail.com>
The current ath11k driver does not support loading m3 firmware for
IPQ5018 and QCN6122 wifi. Although m3 firmware entries are specified
in Q6 WCSS nodes, the driver actually skips loading them. Editing the
driver to force loading m3 results in Q6 crashes and non-functioning
wifi. As such, remove m3 firmware entries for all boards until there's
proper support in the ath11k driver.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21110
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a dedicated helper 'rtpcs_931x_sds_power' to power down/up a SerDes.
Up to now, plain register writes to the corresponding register were used
in several places and with slightly different syntax. Use the helper to
replace the existing boilerplate code for powering on/off SerDes.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move the configuration of 1000Base-X mode into its own function. This
way, redundant code can be replaced by a single function call.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reorder the modes within the switch statement in
rtpcs_931x_sds_config_mode to have a proper and non-confusing order.
Have fiber modes first and MII modes after, and sort all modes in
ascending speed/capabilities order.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Pass the SerDes hardware mode to rtpcs_931x_sds_config_mode instead of
the PHY_INTERFACE_MODE_* mode and use it. Replace matched modes
accordingly.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The PCS driver is intended to use a dedicated hardware mode in the
future because the hardware capabilities and modes of the SerDes do not
align with the PHY_INTERFACE_MODE_* modes.
For the beginning, use the previously introduced generic mode mapping
in the SerDes setup and assign the determined hardware mode to the
corresponding field of a SerDes instance. This allows parallel usage of
both mode representations for the time being, until the phy_interface_t
modes can be dropped from internal functions completely.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Slim the rtpcs_931x_setup_serdes entrypoint by moving the SerDes
configuration sequences for the different SerDes modes into a dedicated
function called rtpcs_931x_sds_config_mode. They form a logical block
similar to what the SDK does and can be taken out to follow the
'divide & conquer' principle.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Configuring USXGMII on RTL931X was disable because it is not setup
properly right now. Affected devices need to rely on U-boot setup for
now. However, it is not the proper way to return an error in case we
just want to skip USXGMII configuration. Thus, just return 0 in that
case indicating it is properly configured.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a generic mapper for mapping the PHY_INTERFACE_MODE_* modes to the
SerDes hardware modes RTPCS_SDS_MODE_*. This is to be used by all
subtargets step-by-step and avoids having subtarget-specific code for
that simple mapping.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rename the mode field in rtpcs_serdes from 'mode' to 'hw_mode' to make
clear what it actually is, to avoid confusion with the phy_interface_t
'mode' usually passed to functions.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21184
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rename them to follow the rtl836x driver gpiod changes.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is the recommended way for the OF based platform.
Tested-on TP-Link TL-WR2543N with RTL8367 switch:
```
root@OpenWrt:~# dmesg |grep -i rtl
[ 7.941126] rtl8367 rtl8367: cannot find mdio node phandle
[ 7.947562] rtl8367 rtl8367: RTL8367R ver. 0 chip found
[ 9.056830] rtl8367 rtl8367: cpu_port:9, assigned to extif0
root@OpenWrt:~# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 512-529, parent: platform/18040000.gpio, 18040000.gpio:
gpio-512 ( |lime:status ) out lo ACTIVE LOW
gpio-513 ( |rtl836x-sda ) in hi
gpio-518 ( |rtl836x-sck ) in lo
gpio-520 ( |lime:usb ) out hi ACTIVE LOW
gpio-523 ( |reset ) in hi IRQ ACTIVE LOW
gpio-524 ( |wps ) in hi IRQ ACTIVE LOW
```
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mdio node is optional for the rtl836x switch. Some devices use GPIO to
control the switch chip. Missing mdio is a normal behavior.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the switch is directly controlled by the mdio bus, we must ensure
that the mdio bus is ready instead of trying GPIO simulated bus.
Fixes: d4ac26ec49 ("kernel: rtl8366-smi: add Realtek switch management via mii-bus")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver gets all the data from the DTS now. No need
to access the shared soc_info structure any longer.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
family_id is now part of the register set and automatically assigned
during initialization. Make use of it. This is basically a conversion
from priv->family_id to priv->r->family_id.
While we are here convert some hard coded family ids to their proper
defines.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Now that the register configuration contains the family data derive it
from the DTS via device_get_match_data().
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver currently determines the family from the soc_info
structure. To avoid the dependency add the family to the local register
structure.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver uses registers in the switchcore range.
Rearrange the DTS nodes accordingly. This allows to make use
of regmap with syscon_node_to_regmap(np->parent) later.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver currently "requests" the memory region of the
ethernet device according to the DTS settings. This is wrong in
two ways:
- The DTS uses arbitrary regions out of the switchcore memory
- The variable is afterwards overwritten by DMA allocation
Drop it.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Realtek Otto ethernet driver currently uses a single compatible
for all different models. Split this into the the four well known
subtargets. This allows to get rid of the central mach/soc include
later.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21183
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
With kernel 6.18 the package shared structure will be hidden from
the phy drivers. Workaround that in advance by providing a shared
private structure that covers all information that is needed for
normal operation.
For further simplification provide a new join() function that takes
care of a consistent initialization.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21204
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Remove unused pinctrl groups defined in the device tree, probably as a
result of importing the vendor device tree which is based on the
reference board from MediaTek's SDK.
114b5c2063 ("mediatek: filogic: Add support ASUS RT-AX57M")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ASUS RT-AX57M, RT-AX54HP V2, RT-AX1800HP V2, RT-AX1800S V2, and RT-AX3000S all use the same firmware and have identical hardware
Hardware
--------
SOC: MediaTek MT7981b
RAM: 256MB DDR3L (Winbond W632GU6NB-09)
FLASH: 128MB SPI-NAND (Winbond W25N01KVZEIR)
WIFI: Mediatek MT7981b + Mediatek MT7976DAN 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531AE Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
MAC addresses
-------------
LAN Label MAC (stored in mtd ubi Factory partition at offset 0x4)
WAN LAN
2.4G LAN + 2 in first octet
5G LAN
Installation
-----------------------------------------------------------
Vendor-UI Method
-----------------------------------------------------------
1. Download the OpenWrt initramfs.trx image.
2. Connect the PC via LAN to one of the yellow router ports and wait
until your PC to get a DHCP lease.
3. Browse to http://192.168.1.1 (or whatever your router IP is configured as)
4. If your router is brand new, finish the setup process and log into
the Web-UI.
5. Navigate to Administration -> Firmware Upgrade and upload the
downloaded OpenWrt initramfs.trx image.
6. Wait for OpenWrt to boot. Open the default OpenWrt IP in a web browser and perform a system upgrade using the sysupgrade image as instructed in the top banner.
---------------------------------------------------------------------------
Revert to stock firmware:
1: Install package facinstall -> https://forum.openwrt.org/t/facinstall-package-for-easy-installation-factory-images/177587
2. Install Asus stock trx image via OpenWRT LuCI interface.
Signed-off-by: Garrett Mesmer <garrettmesm@gmail.com>
Co-authored-by: Oleg S <remittor@gmail.com>
Signed-off-by: Oleg S <remittor@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20491
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a new recipe 'rt-loader-no-uimage' that passes the kernel load
address to rt-loader, causing it to use that instead of it's initial run
address.
The usual behavior is fine for uImages where the load address is
predefined in the header, U-boot loads the image to that address and
then runs it, rt-loader just takes over that address. For non-uImage
instead, the address is tightly coupled to where the image has been
transferred during serial or TFTP upload. This may not be possible on
several devices. Passing a separate kernel load address to rt-loader
decouples that and avoids taking the pain to change the load address of
the kernel itself.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21248
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
rt-loader currently has two operation modes, piggy-backed and
standalone. In standalone mode, the kernel load address is read from the
uImage in flash. In piggy-backed mode, rt-loader instead uses its
initial run address (aka run address during first run) as the kernel
load address. This is safe and works fine for all devices either using
U-boot or having no issue uploading an image to the default kernel load
address 0x80100000.
To extend usecases, allow to specify a kernel load address when
building rt-loader. In this case, rt-loader uses this address instead of
the address inferred at runtime.
On certain Zyxel devices, this allows to upload and boot an rt-loader
piggy-backed image to an alternate address but keep the default kernel
load address of 0x80100000. BootExt on these devices occupies memory
above and will crash during transfer when this address is used as upload
location. Using this extension, the image can be uploaded to e.g.
0x80300000 and rt-loader will use 0x80100000 as the final load address.
This avoid taking the pain the adjust the load address of the kernel
itself.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21248
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
After merge of https://github.com/openwrt/openwrt/pull/20709 I noticed,
that https://mirror-03.infra.openwrt.org/snapshots/targets/ath79/tiny/
still does not contain the build for RE450.
I analyzed the problem and noticed, that only builds which fits into
original size can be build and if the image is larger, it fails with
the following error: "WARNING: Image file .../openwrt/build_dir/
target-mips_24kc_musl/linux-ath79_tiny/tmp/
openwrt-ath79-tiny-tplink_re450-v1-squashfs-sysupgrade.bin is too big:
> 7864320".
This error is quite misleading as the image is smaller than 7864320. The
reason for this error is that default tplink-safeloader has hardcoded
factory partition structure and fails to generate any file.
Rather then fixing tplink-safeloader I followed approach from commit
ebd5e5fb53 ("ramips: switched TP-Link RE305 v1 to new partition layout")
and switched away from "tplink-safeloader sysupgrade".
I did not include "IMAGES := sysupgrade.bin", because with tiny target it
is still possible to locally build even factory image.
Fixes commit e768731dc8 ("ath79: switch TP-Link RE355 v1, RE450 v1 and
RE450 v2 to mtd-concat").
Signed-off-by: Radek Dostál <rd@radekdostal.com>
Link: https://github.com/openwrt/openwrt/pull/21158
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Popular cheap PWM fans for this machine, like the ones coming in
heatsink+fan combos will not work properly at the currently defined
medium speed. Trying different pwm setting using a command
echo $value > /sys/devices/platform/pwm-fan/hwmon/hwmon1/pwm1
I found:
pwm1 value fan rotation speed cpu temperature notes
-----------------------------------------------------------------
0 maximal 31.5 Celsius too noisy
40 optimal 35.2 Celsius no noise hearable
95 minimal
above 95 does not rotate 55.5 Celsius
-----------------------------------------------------------------
Current cooling levels are:
cooling-levels = <255 96 0>;
Thus only cpu-active-high and cpu-active-low modes are usable.
This patch fixes cpu-active-medium settings for bpi-r3 board.
This patch may not be enough. Users may wants to tweak their thermal_zone0
trip points, thus tuning fan rotation speed depending on cpu temperature.
That can be done on the base of the following example:
=== example =========
# cpu temperature below 25 Celsius degrees, no rotation
echo 25000 > /sys/class/thermal/thermal_zone0/trip_point_4_temp
# cpu temperature in [25..32] Celsius degrees, normal rotation speed
echo 32000 > /sys/class/thermal/thermal_zone0/trip_point_3_temp
# cpu temperature above 50 Celsius degrees, max rotation speed
echo 50000 > /sys/class/thermal/thermal_zone0/trip_point_2_temp
=====================
Changes v2:
* put patch to a proper directory
* updated patch description
* tested with latest openwrt based on linux-6.6
Changes v3:
* use upstream linux patch
* update patch description
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17130
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch to NO_HZ_IDLE for energy saving. Also enable Menu cpuidle
governor for tickless systems.
Run-tested: Linksys WRT1900AC v2
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21136
Signed-off-by: Robert Marko <robimarko@gmail.com>
