Allow toggling autostart even for disabled devices
When switching from enabled to disabled, call teardown instead of setup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes a crash on some config reload types
Fixes: 816c2d86e7 ("hostapd: add support for MLO interfaces in ucode")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MLO can be enabled by configuring a wifi-iface section with multiple
radios, like this:
config wifi-iface
list radio 'radio0'
list radio 'radio1'
option mlo '1'
option ssid 'OpenWrt'
option mode 'ap'
option network 'lan'
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MLO interface config is provided in a separate ubus call before
adding regular per-phy interfaces.
Preparation for full MLO support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
3a7878065829 system-dummy: add missing vrf functions
471d9d6abb6d CMakeLists.txt: bump minimum required version
c3a0255e2150 scripts: fix dummy mode on systems where libubox is in /usr/local
7a3b281230e4 update example mac80211 script and wireless config
d9f2dd2614f2 wireless: replace with ucode scripts
74c22601baad wireless: add MLO support to example scripts
Signed-off-by: Felix Fietkau <nbd@nbd.name>
As discussed in openwrt#17517, there are contents of hostapd's configuration file logged in syslog.
This includes critical information like `passphrase`. To circumvent this condition,
this commit logs only "inline" if config_fname is inline data.
Otherwise the upstream logic of hostapd applies.
Fixes: openwrt#14049
Signed-off-by: Christian Korber <ck@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/17718
Signed-off-by: Robert Marko <robimarko@gmail.com>
The usage of automake is left over
after the patch which required it was removed
since the new configure option
"--without-cli" was added to upstream.
Remove the usage of autotools to save build time.
Ref: 72e6e0b85 ("nftables: introduce experimental nftables")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The direction needs to be included in the IOCTL call.
Fixes: b91d7d9d78 ("ltq-*-app: extend ubus metrics/statistics")
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://github.com/openwrt/openwrt/pull/19363
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
glibc 2.39 has removed libcrypt completely.
solution: link against libxcrypt built with glibc compatibility.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19293
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream has disabled SHA-1 algorithms by default since version 2025.87.
SHA-1 has known weakness and most SSH implementations support alternatives.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
It's hard or even impossible to track affected sources
so it's safe to remove all built objects (if any).
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
This allows to fine-tune dropbear build options.
This change is heavily based on similar work done by Marius Dinu earlier
so I'd like to say many thanks to original author.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
- update dropbear to latest stable 2025.88;
for the changes see https://matt.ucc.asn.au/dropbear/CHANGES
- rewrite 100-pubkey_path.patch
- refresh remaining patches
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Correctly load the list of basic_rates from UCI. basic-rates shall be
stored as a option-list. The current code did not retrieve this list
correctly.
wpa_supplicant uses a different config option to set basic-rates
when operating in mesh-mode.
Use the correct config key and calculation for mesh-interfaces.
Signed-off-by: David Bauer <mail@david-bauer.net>
The upstream submission for this mandates the node to be named wifi
instead of wmac. Change all ath79 entries to match the new names and
remove the compatibility patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19328
Signed-off-by: Robert Marko <robimarko@gmail.com>
nl80211 events were propagated to the wrong interfaces
Fixes: 2ac791e87d ("hostapd: update to version 2025-06-27")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Manually refreshed:
140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch
601-ucode_support.patch
Fixed in upstream:
804-hostapd-revert-ACS-Validate-6-GHz-AP-criteria-before.patch [1]
Automatically rebased all other patches.
[1] https://w1.fi/cgit/hostap/commit/?id=0b60826a66885bffa2fd709ed5e48cd5fe241b6b
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
802.11be capable platforms are big enough to not need the mini variant,
and removing it here saves space for other other devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Override via RSNE is a relatively new feature, which can be used to enable
WPA3 features in a way that is invisible to older clients.
Use it by default to mask the GCMP-256 cipher from older clients, since
there are compatibility issues with existing devices.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
