The Storlink reference designs sometimes fail upgrade because
not the entire partition is used, so the size isn't equal to
the actual flash space available for the partition.
Fix this by calculating the actual partition sizes by measuring
across the partition offsets instead.
Link: https://github.com/openwrt/openwrt/pull/21750
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Gemini reference design-derived devices uses a partition
format which is predictable and we can exploit this to offer
some proper upgrade path.
The kernel for these contains a hack to use this partition
format unaltered by combining the partitions "Kern" and "Ramdisk"
to one image with all of the kernel+ramdisk in memory.
Then the "Application" which is used for the rootfs go into its
own partition.
Standard flash layout:
Kern 2048k |
Ramdisk 6144k | = 9216k
Application 6144k | = 15360k
Following the pattern of the factory image we create three
images named zImage, rd.gz and hddapp.tgz (these filenames
are misleading! They are just required by the old firmware.)
and flash each individually with "mtd" during upgrades.
Since the IB-4220-V has a different layout with a bigger kernel
space we parameterize this so we can handle this too. (More
fixes are needed for that device though.)
A way to upgrade older OpenWrt on these platforms to the latest
and greatest will be to copy the file
target/linux/gemini/base-files/lib/upgrade/platform.sh
to /lib/upgrade/platform.sh
on your running system and then run sysupgrade from the image
produced after this patch.
The script is picky to sanity check the partitions before
commencing upgrade.
This was tested with a full sysupgrade on the iTian SQ201.
Link: https://github.com/openwrt/openwrt/pull/21680
Signed-off-by: Linus Walleij <linusw@kernel.org>
This drops the shebang from all target files for /lib and
/etc/uci-defaults folders, as these are sourced and the shebang
is useless.
While at it, fix the executable flag on a few of these files.
This does not touch ar71xx, as this target is just used for
backporting now and applying cosmetic changes would just complicate
things.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This changes the offsets for the MAC address location in
mtd_get_mac_binary* and mtd_get_mac_text to hexadecimal notation.
This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-mac-address in DTS files.
(e.g. 0x1006 and 0x5006 are much more useful than 4102 and 20486)
Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
The DIR-685 has the MAC addresses in the RedBoot code just like
DNS-313. Check some magic numbers to determine that the MAC
address is where we want it and extract it from RedBoot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[replaced ifconfig with ip, ! -z = -n, added string quotes]
The DNS-313 isn't the only special board so let's bite the
bullet and create a case ladder in preparation for DIR-685.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed]
This simplifies the ethernet address extraction script
by using standard library functions to locate the MTD
partitions and extract ethernet address from a binary
offset location in the flash. Furthermore, the aging
ifconfig is replaced by the ip tool, which will now
assign the MAC addresses.
Suggested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[ifconfig replacement, use -n instead of ! -z,
-n requires string to be quoted within the test brackets,
drop prepended "x" in check, add quotes, make local
variables local, kill whitespaces]
This makes sysupgrade work on the D-Link DIR-685 after
initial factory install.
We create the platform.sh script to support sysupgrade
on more targets as we move on with sysupgrade support.
Cc: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[cleanup in platform.sh, removed superfluous SUPPORTED_DEVICES]
