The mobility_domain value generated by ucode differed from the previous
shell script implementation. The legacy shell script used `echo` on the
SSID, which appended a trailing newline.
To maintain roaming compatibility with pre-25.12 releases and OpenWrt
forks in default configuration, update the ucode logic to include this
newline character when generating the default value.
Fixes: #21731
Signed-off-by: Youfu Zhang <zhangyoufu@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21732
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Extend the taxonomy subsystem to capture the complete association frame
in addition to the existing probe and association IE data.
This adds a new assoc_frame_taxonomy field to struct sta_info and exposes
it via the get_sta_ies ubus method as a base64-encoded "assoc_frame" field.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Extend the hostapd_rrm_beacon_req ubus method to support the optional
reporting_detail parameter as defined in IEEE 802.11-2016 section 9.4.2.21.7.
Also fix missing assignment operators (=) in the beacon_req_policy array
initialisation.
Signed-off-by: John Crispin <john@phrozen.org>
Add netifd_loglevel to /etc/config/network:
config globals 'globals'
option netifd_loglevel '1'
The netifd's default value is 2.
Signed-off-by: Peter Meiser <peter.meiser@gmx.com>
Link: https://github.com/openwrt/openwrt/pull/19737
Signed-off-by: Robert Marko <robimarko@gmail.com>
The `syn_flood` option name is deprecated, `synflood_protect` should
be used instead. firewall3 and firewall4 both support this option since
a long time. LuCI already replaces the option name.
0abcb39b62
Suggested-by: rparge in OpenWrt forum
Link: https://github.com/openwrt/openwrt/pull/21642
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
KERNEL_DCB was introduced in 40f1db9cb1, however the dcb utility is not
enabled for iproute2. Although DCB is not generally available among
Ethernet cards, not having the dcb utility renders it completely
unchangeable.
On aarch64, it takes ~85.3KiB.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21606
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
bump dnsmasq to latest 2.92
updated 200-ubus_dns.patch
no changes to 100-remove-old-runtime-kernel-support.patch
all remaining patches not required
Changelog for version 2.92 https://thekelleys.org.uk/dnsmasq/CHANGELOG
Signed-off-by: gongzi miao <miaogongzi0227@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21598
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Extract survey fetching into get_survey() and store results in iface.survey,
allowing access to full survey info (not just noise) for later use.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Moved interface discovery and data population into an exported update()
function that can be called on-demand to refresh wireless interface
information. This allows using iwinfo.uc as a library inside daemons.
Signed-off-by: John Crispin <john@phrozen.org>
nf_conntrack_ipv6 is no longer a separate kernel module, so remove it.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21612
Signed-off-by: Robert Marko <robimarko@gmail.com>
WiFi 6E (802.11ax) clients cannot discover 6GHz APs operating at
320MHz because the HE Operation element contains uninitialized
center frequency values.
For EHT320 mode, the code sets eht_oper_centr_freq_seg0_idx but not
the corresponding HE values. Later, the HE values are copied from
VHT values, but VHT is not used on 6GHz, leaving he_oper_chwidth
and he_oper_centr_freq_seg0_idx at 0. This causes WiFi 6E clients
to see incorrect channel width information, making the AP invisible
to them during scanning.
Fix this by:
1. Setting he_oper_chwidth to 3 (160MHz) for EHT320 mode
2. Computing he_oper_centr_freq_seg0_idx based on the 160MHz segment
that contains the primary channel
3. Preserving these pre-set values instead of overwriting them with
uninitialized VHT values
WiFi 7 clients continue to see 320MHz operation via the EHT Operation
element, while WiFi 6E clients can now discover and connect at 160MHz.
Signed-off-by: Ryan Chen <rchen14b@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21588
Signed-off-by: Robert Marko <robimarko@gmail.com>
The code to be replaced is a glorious no-op. A default value for
config.radius_das_client does not need to be assigned. This parameter
already has non-empty value: see the enclosing 'if' block.
As a result, the value of config.radius_das_client never gets modified
to contain both dae_client and dae_secret. This breaks hostapd.add_iface()
that expects config.radius_das_client to contain both dae_client and
dae_secret separated by a whitespace.
Fixes: #21519
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21522
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit 9151c7015e introduced support for the global DHCP DUID to
generate a RFC4361-style client identifier.
However, the IAID introduced in those changes is based on ifindex, which
is subject to changes and causes issues on environments requiring a stable
IAID.
This commit switches the IAID to a stable one based on MD5.
Fixes: 9151c7015e ("netifd: use the global DHCP DUID for DHCPv4")
Link: https://github.com/openwrt/openwrt/pull/21489
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
It is a BSS-level option and not radio-level. As such,
move it to wifi-iface and ap.uc.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/21412
Signed-off-by: Robert Marko <robimarko@gmail.com>
They are being default enabled unconditionally when they should
depend on 802.11k. 802.11k should not be enabled by default
either as it can cause issues with certain older drivers and
is useless without a userspace program like usteer or DAWN.
If users want to enable 802.11k they will enable it when they
set such programs up.
Another inconsistency with rnr was dealt with so that it is not
default enabled. This is also not done with old wifi-scripts
and is generally unexpected and surprising behavior.
Moreoever, this introduces an inconsistency between old shell
wifi-scripts and ucode version. Old wifi-scripts does not do this.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/21425
Signed-off-by: Robert Marko <robimarko@gmail.com>
When DHCP Option 60 is specified via sendopts (hex, decimal, or named
formats), udhcpc sends its default "udhcp <version>" string alongside
the custom value, which causes authentication failures with some ISPs.
This fix detects Option 60 in sendopts and automatically passes -V ""
to udhcpc to suppress the default version string while allowing
multiple user-defined vendor classes.
Supported formats:
- Hexadecimal: 0x3c
- Decimal: 60
- Named: vendor
Fixes: #21242
Signed-off-by: JINLIANG GU <ihipop@gmail.com>
https://github.com/openwrt/openwrt/pull/21450
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This helps for setups where the wifi interfaces are added dynamically
via procd data by avoiding automatically bringing up interfaces with
the default config. Internally, they are treated pretty much the same
by netifd.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
channel.disconnect() already closes the fd via ubus_shutdown(),
so calling socket.close() afterwards is redundant and causes EBADF.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a 10-second timeout for outgoing auth requests to prevent
connections from getting stuck when the remote peer goes silent
after the hello handshake but before responding to auth.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The network may be deleted before the disconnect callback fires.
Check for null to avoid crash when accessing net.tx_channels.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Mesh mode interface creation fails when the freq parameter is empty or
undefined. Unlike adhoc mode which checks if freq exists before using it,
mesh mode blindly constructs the iw command with freq parameter, resulting
in invalid syntax like:
iw dev mesh0 mesh join ssid freq NOHT
This causes the mesh interface to be created without joining the mesh
network, leaving it in a DOWN state with no channel assigned.
Fix by adding freq validation check similar to adhoc mode.
Tested on two routers in parallel as mesh peers:
- Xiaomi AX3000T (MediaTek MT7981)
- OpenWrt One (MediaTek MT7981)
- OpenWrt 6.6.119, 802.11s mesh on 5GHz (Channel 36, HE80)
Signed-off-by: Valent Turkovic <valent@meshpointone.com>
Link: https://github.com/openwrt/openwrt/pull/21373
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The for-in loop variable 'name' was shadowing the function parameter,
causing remote subscription cleanup to fail when hosts disconnect.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It seems project URL has been changed.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems project URL has been changed.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
Website has been moved to netfilter.org.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/21279
Signed-off-by: Robert Marko <robimarko@gmail.com>
Inadvertently defining 'DEFAULT_VARIANT' on both ethool and
ethtool-full variants resulted in
$ make defconfig
tmp/.config-package.in:121615:error: recursive dependency detected!
tmp/.config-package.in:121615: symbol PACKAGE_ethtool-full is selected by PACKAGE_ethtool
tmp/.config-package.in:121605: symbol PACKAGE_ethtool depends on PACKAGE_ethtool-full
Fix this by simply undefining 'DEFAULT_VARIANT' on the ethtool-full
variant, which is ugly, but expedient.
Fixes: https://github.com/openwrt/openwrt/commit/f4fdb996
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21363
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some packages with variants did not specify the default among the
alternatives, so were left without any apk 'provider_priority'
for that package. This caused the apk solver to select the wrong
variant, silently changing the requested package list.
Notable among these were busybox, procd and the hostapd/wpad suite.
This behavior presented in the imagebuilders when creating the
image as follows, silently replacing packages even when explicitly
requested:
$ make image PACKAGES=busybox
...
( 14/148) Installing busybox-selinux (1.37.0-r6)
...
We add 'DEFAULT_VARIANT:=1' to the packages that were missing one,
providing apk with sufficient information to choose the correct
package.
See link below for further examples and discussion.
Link: https://github.com/openwrt/openwrt/pull/21288#issuecomment-3704101422
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21358
Signed-off-by: Robert Marko <robimarko@gmail.com>
Wifi on the 6GHz band does not support open networks, configure owe by
default. 6GHz wifi also needs a country code, configure a broken country
code '00' by default to hint the user to change it.
Link: https://github.com/openwrt/openwrt/pull/21313
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Without this patch, the
if (!config.wpa)
config.wpa_pairwise = null;
is overwritten immediately.
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Link: https://github.com/openwrt/openwrt/pull/21215
Signed-off-by: Robert Marko <robimarko@gmail.com>
When wdev interfaces and hostapd interfaces are mixed, race conditions
can occur. Sometimes all interfaces are started correctly, sometimes only
the wdev interface and some of the hostapd interfaces, and sometimes only
the wdev interface.
Fix this by creating the wdev interfaces first, before processing
wpa_supplicant or hostapd interfaces.
Link: https://github.com/openwrt/openwrt/pull/21303
Signed-off-by: Nick Hainke <vincent@systemli.org>
The multicast rate (mcast_rate) is defined as a single numeric value,
not an array. The ucode scripts already expect a single number, and
the OpenWrt documentation specifies this option as an integer [0].
Adjust the wireless schema accordingly. This also fixes the wdev.uc
call path for the iw fallback mesh setup.
[0] - https://openwrt.org/docs/guide-user/network/wifi/basic
Link: https://github.com/openwrt/openwrt/pull/21291
Signed-off-by: Nick Hainke <vincent@systemli.org>
The previous wdev.uc invocation failed for mesh interfaces.
Rewrite it as a loop so the mesh interface is created correctly
when no wpa_supplicant mesh support is installed.
Link: https://github.com/openwrt/openwrt/pull/21291
Signed-off-by: Nick Hainke <vincent@systemli.org>
Mesh interfaces may not define an encryption setting. This results in
a ucode runtime error when parse_encryption() is called:
Reference error: left-hand side expression is null
In parse_encryption(), file /usr/share/ucode/wifi/iface.uc, line 20, byte 32:
called from function setup_sta (/usr/share/ucode/wifi/supplicant.uc:59:31)
called from function generate (/usr/share/ucode/wifi/supplicant.uc:243:41)
called from function setup (./mac80211.sh:254:61)
called from anonymous function (./mac80211.sh:342:14)
` config.auth_type = encryption[0] ?? 'none';`
Near here ------------------------^
Link: https://github.com/openwrt/openwrt/pull/21293
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add EHT* check so that the hwmode will display 802.11be capability correctly.
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21267
Signed-off-by: Nick Hainke <vincent@systemli.org>
This fixes a simple logic error in the macaddr existence check in mac80211.uc.
Signed-off-by: Harin Lee <me@harin.net>
Link: https://github.com/openwrt/openwrt/pull/21277
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ncm proto handler ignored ip4table, ip6table, and mtu settings.
The fix is based on the existing code in the mbim proto handler.
Fixes: #20216.
Signed-off-by: Alexander Patrakov <patrakov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20217
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
