Switch ath10k and related kmods to use the new virtual kmod provides
semantic and mark ath10k as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Interrupt vector for reo2host-status is wrongly assigned.
Status interrupts weren't received and a workaround was applied to
mac80211 to periodically poll the reo status ring. Therefore, the
workaround can be removed with the proper hardware interrupt line
assigned.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21271
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport patch fixing support for GCC15 caused by __counted_by.
This macro was moved to a different header in recent kernel version and
caused wrong detection on the #ifndef condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending fix for wrong resource_size() usage that cause firmware
crash on load on ath11k.
Refresh all affected patch by this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop all upstreamed patch and refresh all affected patch.
Minor changes were needed to the
350-mac80211-allow-scanning-while-on-radar-channel due to changes in
6.18.
Also some changes were needed to downstream patch due to upstream commit
b74947b4f6ff ("wifi: cfg80211/mac80211: Add support to get radio index")
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending patch to fix RSSI station data on IPQ5018 and QCN6122.
Signed-off-by: Scott Mercer <TheRootEd24@gmail.com>
[ improve commit description, replace patch ]
Link: https://github.com/openwrt/openwrt/pull/20834
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Some Marvell AP firmware used with mwl8k misbehaves when beacons do not
contain the DSSS Parameter Set (WLAN_EID_DS_PARAMS) with the current
channel. When hostapd/mac80211 omits this element (which is valid on
some bands), the firmware may report bogus RX channel information and AP
mode becomes unusable.
Backport the upstream fix that ensures beacons always carry the DSSS
Parameter Set for mwl8k: when setting the beacon, detect if the element
is missing and inject it after SSID and Supported Rates (per spec
ordering). This mirrors behaviour in newer Marvell drivers and restores
stable operation.
Tested on Linksys EA4500 (88W8366).
Fixes: openwrt/openwrt#19088
Link: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless.git/commit/?id=c4e1ac09ee1c750890e36cb1f841f25518f23589
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20757
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
warning print "ath11k c000000.wifi: failed to flush transmit queue 0"
is observed during busy times.
The mac80211 fallback implementation of `flush_sta` does not handle the per STA queues well.
This is fixed by providing a ath11k specific implementation of flush_sta telling the firmware to flush a given station.
The draining of the transmit queues should therefore stop correctly, even if new packets arrive in the mean time.
An upstream ath11k RFC is available at:
https://patchwork.kernel.org/project/linux-wireless/patch/GV1P250MB14333A5BF24623C4753A10E1E8E0A@GV1P250MB1433.EURP250.PROD.OUTLOOK.COM/
The patch was tested on a Xiaomi AX3600.
Signed-off-by: Florian Maurer <f.maurer@outlook.de>
Tested-by: Florian Maurer <f.maurer@outlook.de>
Co-authored-by: Benjamin Berg <benjamin@sipsolutions.net>
Tested-by: Flole <flole@flole.de>
Link: https://github.com/openwrt/openwrt/pull/20293
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This includes the following commits from upstream Linux between 6.16 and 6.16.12:
wifi: ath11k: clear initialized flag for deinit-ed srng lists
wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()
wifi: ath11k: fix dest ring-buffer corruption
wifi: ath11k: fix source ring-buffer corruption
wifi: ath11k: fix dest ring-buffer corruption when ring is full
wifi: ath11k: fix group data packet drops during rekey [1]
wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
[1] The patch "940-ath11k-Revert-clear-the-keys-properly-when-DISABLE_K.patch" has been removed, as it has been fixed upstream in "wifi: ath11k: fix group data packet drops during rekey" and is added in 945 patch.
Related: https://github.com/openwrt/openwrt/pull/18705
Related: https://github.com/openwrt/openwrt/issues/9555
Related: https://github.com/openwrt/openwrt/issues/14117
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/20395
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Remove leading 0 from filename.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/20395
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add Realtek RTL8822CS support to the rtw88 package.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/20423
Signed-off-by: Nick Hainke <vincent@systemli.org>
Fix probing and load correct drivers
when using last backports.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19927
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
All of this uses OF now. No need to keep platform data around.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19804
Signed-off-by: Robert Marko <robimarko@gmail.com>
Estimate the tx throughput based on the expected per-packet tx time.
This is useful for mesh implementations that rely on expected throughput,
e.g. 802.11s or batman-adv.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The upstream submission for this mandates the node to be named wifi
instead of wmac. Change all ath79 entries to match the new names and
remove the compatibility patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19328
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ath9k ahb patch was updated to match the latest upstream version,
however the openwrt DT files still use the older names.
Add those as extra entries in order to remain compatible until DT files
are fixed.
Fixes: 88f4c32060 ("mac80211: update to version 6.14.11")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
QCN6122 wifi in fw-memory-mode 1 has a slightly larger caldb size than
currently defined in the ath11k driver. When coldboot calibration was
disabled, the fw mem mode was changed from 2 (256MB mem profile) to 1
(512MB mem profile), which is the correct setting for devices in scope.
However, in fw mem mode, the caldb size is 0x500000 instead of the max
0x480000 defined in the driver, causing QCN6122 wifi failing to boot:
ath11k b00a040.wifi1: qmi mem size is low to load caldata
ath11k b00a040.wifi1: failed to assign qmi target memory: -22
As such, change the max caldb memory size accordingly.
This macro is used by the driver only as a max size limit to validate
the requested caldb size returned by QMI. Different ath11k wifi chips
have different caldb sizes (for ex. the size for IPQ5018 is 0x200000).
Fixes: cf715a2305 ("wifi: ath11k: disable coldboot calibration for ipq5018")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19118
Signed-off-by: Robert Marko <robimarko@gmail.com>
Coldboot calibration does not work causes the firmware to crash during
wifi startup. So let's disable coldboot calibration until a solution is
found.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19083
Signed-off-by: Robert Marko <robimarko@gmail.com>
This adds support for RTL8814AE/RTL8814AU PCI/USB adapters.
Run-tested: x86/64/rockchip
USB adapter tested: Hawking HW17ACU Wireless-AC1750.
Signed-off-by: Marty Jones <mj8263788@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19052
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The original OF code effectively does a reset at ahb.c but then again in
hw.c. For AR9330, it's already done in the driver and with the others,
there are patches in here that do the same. hw.c looks like the proper
place to handle this.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19031
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fixes ath9k on ar934x platforms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19031
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream seems to be using led-sources instead of custom properties.
Code mostly taken from mt76.
Changed all(few) users of qca,led_pin to use the new format.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18805
Signed-off-by: Robert Marko <robimarko@gmail.com>
It's the proper function to handle this stuff in.
The original patch abused the fact that the ath9k driver in init called
ath9k_init_platform to populate all the needed configuration. This is
the wrong place to do so and it also goes away in 6.13.
Move 553-ath9k_of_gpio_mask.patch contents to ath9k_of_init where they
belong.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18764
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix following warnings by including the corresponding headers:
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:50:6: error: no previous prototype for 'ath9k_hsr_init' [-Werror=missing-prototypes]
50 | void ath9k_hsr_init(struct ath_hw *ah)
| ^~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:165:5: error: no previous prototype for 'ath9k_hsr_disable' [-Werror=missing-prototypes]
165 | int ath9k_hsr_disable(struct ath_hw *ah)
| ^~~~~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:177:5: error: no previous prototype for 'ath9k_hsr_enable' [-Werror=missing-prototypes]
177 | int ath9k_hsr_enable(struct ath_hw *ah, int bw, int fq)
| ^~~~~~~~~~~~~~~~
backports-6.12.6/drivers/net/wireless/ath/ath9k/hsr.c:234:5: error: no previous prototype for 'ath9k_hsr_status' [-Werror=missing-prototypes]
234 | int ath9k_hsr_status(struct ath_hw *ah)
| ^~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix mt76 build error on 6.12 kernel:
In file included from /workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mt76-2025.04.11~be28ef77/mt76x0/eeprom.c:13:
/workspaces/openwrt/staging_dir/target-x86_64_musl/usr/include/mac80211-backport/asm/unaligned.h:3:15: fatal error: asm/unaligned.h: No such file or directory
3 | #include_next <asm/unaligned.h>
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move rt2x00lib_read_eeprom() function prototype from rt2800lib.h to
rt2x00.h and make rt6352_enable_pa_pin() static to fix the missing
prototypes warnings:
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2x00eeprom.c:213:5: error: no previous prototype for 'rt2x00lib_read_eeprom' [-Werror=missing-prototypes]
213 | int rt2x00lib_read_eeprom(struct rt2x00_dev *rt2x00dev)
| ^~~~~~~~~~~~~~~~~~~~~
/workspaces/openwrt/build_dir/target-x86_64_musl/linux-x86_64/mac80211-regular/backports-6.12.6/drivers/net/wireless/ralink/rt2x00/rt2800lib.c:308:6: error: no previous prototype for 'rt6352_enable_pa_pin' [-Werror=missing-prototypes]
308 | void rt6352_enable_pa_pin(struct rt2x00_dev *rt2x00dev, int enable)
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
