Switchdev driver used by microchipsw supports DCB and has not storage
constraints, so enable kernel and driver DCB support by default.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Update the econet-eth driver to a new version which is of
sufficient quality that it is realistic to think about upstreaming.
This version is now NAPI based, collects stats, downloads without
dropped packets anymore, has debugfs introspection, and can be
unloaded and reloaded (providing the reset controller is present).
PR #21545 is recommended but not required, without this the
ethernet driver will log a warning on startup because it can't get
the resets and it will be impossible to unload and reload the
driver without a reboot. However, the PoC driver was not capable of
reloading so this is not a regression.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/21557
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
nf_conntrack_ipv6 is no longer a separate kernel module, so remove it.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21612
Signed-off-by: Robert Marko <robimarko@gmail.com>
This driver supports the ADT7470 thermal monitoring chip, which is used
in the ECS4100-12PH switch.
Fixes: fa9f925951 ("realtek/rtl839x: Edgecore ECS4100-12PH support")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Link: https://github.com/openwrt/openwrt/pull/21505
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Motorcomm YT8821 2.5G PHY is being used in some devices as an
alternative to devices like the RTL8221B. Package it as a kmod
so it can be used as a device package rather than requiring changes
to the target kernel config.
Signed-off-by: Andrew MacIntyre <andymac@pcug.org.au>
Link: https://github.com/openwrt/openwrt/pull/21399
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduce the kmod-pmbus-sensors package to provide the
generic PMBus hwmon driver (CONFIG_SENSORS_PMBUS).
This enables support for a wide range of PMBus-based devices
including ADP4000, BMR310, BMR480, MAX20796, TPS544B25, and others.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/21444
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, kmod-crypto-kpp is only implied for curve25519 and thus it
can get unselected and then building will fail due to missing kpp.ko.
Same issue happens with kmod-crypto-hash for poly1305.
So, lets drop the whole implies logic and make sure to always select
them as dependencies.
Fixes: #21386
Link: https://github.com/openwrt/openwrt/pull/21483
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump to 2025-11-04 snapshot.
Added 100-gcc15-fix.patch which drops __DATE__/__TIME__ usage and provides
a stable fallback ("unknown"). This fixes build failures with GCC 15 and
-Werror=date-time in kernel builds.
% git log --oneline 04923c5..adb2f72
adb2f72e6fb8 get rid of spurious ubsan complaint for nat46_instance_t pairs field
d5f88686a4a8 Add a test harness which boots the kernel under kvm with a custom init which runs the tests
b983bab221f0 nat46-core: Fix FIXMEs about ICMPv6 parameter pointers
1aca482d6917 Add support for ignoring traffic class or TOS translation at the same time
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21284
[Removed "Replace printk with pr_* macros" patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is adding SUN6I-CSI and OV5640 driver for AllWinner platform for NanoPi
Signed-off-by: Michel Promonet <michel.promonet@free.fr>
Link: https://github.com/openwrt/openwrt/pull/20085
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Switch rtl8812au-ct to use the new virtual kmod provides semantic.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch ath10k and related kmods to use the new virtual kmod provides
semantic and mark ath10k as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch r8169 and related kmods to use the new virtual kmod provides
semantic and mark r8169 as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
- Changing return type from void to int
- Returning error code instead of void on superio_enter() failure
- Returning 0 on success
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21218
Signed-off-by: Robert Marko <robimarko@gmail.com>
Interrupt vector for reo2host-status is wrongly assigned.
Status interrupts weren't received and a workaround was applied to
mac80211 to periodically poll the reo status ring. Therefore, the
workaround can be removed with the proper hardware interrupt line
assigned.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21271
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add 08644db02d
to allow builds against the 6.18 series of kernels.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add menuconfig option 'kmod-usb-gadget-fs' for the USB FunctionFS gadget
module
OpenWRT is perfect for USB gadgets that are network-enabled, since it
provides everything needed to easily manage the device. Having support
for the FunctionFS gadget enables the use of any custom USB devices
that does not have a specific module, like Media Transfer Protocol.
Signed-off-by: Dominic Germain <dominic@germain.cc>
Link: https://github.com/openwrt/openwrt/pull/21207
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The build system allows to use Linux release candidate kernels (-rcX).
For this a target/linux/generic/kernel-6.XY as follows is needed:
LINUX_VERSION-6.XY = -rc1
LINUX_KERNEL_HASH-6.XY-rc1 = 18ba6ebd72f46b881e0d73e390b2888b7b43...
Sadly the builds fail with a packaging error.
fakeroot /home/openwrt/openwrt/openwrt/staging_dir/host/bin/apk
mkpkg --info "name:kernel" --info "version:6.15-rc1~c4bf...1f6-r1"
ERROR: info field 'version' has invalid value: package version is invalid
The apk metadata specification reads:
"... Currently the APK version specification is as follows:
number{.number}...{letter}{_suffix{number}}...{~hash}{-r#} ...
Optionally one or more _suffix{number} components can follow.
The list of valid suffixes (and their sorting order) is: alpha,
beta, pre, rc, <no suffix>, cvs, svn, git, hg, p."
Given that the kernel uses "-rcX" naming scheme and apk requires
"_rcX" instead, simply translate the dash to an underscore for
these builds.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21214
Signed-off-by: Robert Marko <robimarko@gmail.com>
Teaming is a link aggregation implementation similar to bonding, but
it's configured by a userspace program.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21120
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport patch fixing support for GCC15 caused by __counted_by.
This macro was moved to a different header in recent kernel version and
caused wrong detection on the #ifndef condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending fix for wrong resource_size() usage that cause firmware
crash on load on ath11k.
Refresh all affected patch by this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The issue described in the patch can not be reproduced in the latest
6.18 ath10k-ct driver. It should have been fixed by the upstream.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21089
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Switch ath10k-ct kernel version base to 6.18 to align with backports
package based on 6.18 kernel version.
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport upstream patch fixing support for 6.18 due to kernel upstream
commit b74947b4f6ff ("wifi: cfg80211/mac80211: Add support to get radio
index")
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop all upstreamed patch and refresh all affected patch.
Minor changes were needed to the
350-mac80211-allow-scanning-while-on-radar-channel due to changes in
6.18.
Also some changes were needed to downstream patch due to upstream commit
b74947b4f6ff ("wifi: cfg80211/mac80211: Add support to get radio index")
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is about as simple as it gets, it's able to start up and put
the onboard switch into dumb switch mode and then send untagged
frames which become available on every switch port.
It is out-of-tree to allow for rapid development and it is being
proposed now because even in this state it brings a lot of value
to the EcoNet platform and it is a fairly complex ethernet system
so it will take some time before the driver is in a state that
may be considered for upstreaming.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/20685
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
cdedfd891bdf nss-dp: fix hardware STP state sync with the kernel
19c51af0c5be nss-dp: switchdev: improve FDB cleanup for roaming
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fixes compile errors caused by static const arrays;
The lantiq firmware is const now.
ATTRIBUTE_GROUPS() does not take const.
Fixes: 5b263f3360 ("treewide: add const to static arrays")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Unneeded semicolon
WARNING comparing pointer to 0
WARNING: NULL check before some freeing functions is not needed.
WARNING: casting value returned by memory allocation function to (u32 *)
ERROR: allocation function on line 378 returns NULL not ERR_PTR on failure
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19932
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Overwrite default Quilt/Refresh/Package and use the Kernel variant to
correctly refresh bpf-headers patches.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
