diff --git a/target/linux/qualcommax/dts/ipq6018-tplink-eap6xx-outdoor.dtsi b/target/linux/qualcommax/dts/ipq6018-tplink-eap6xx-outdoor.dtsi
index cefdcde311..9ab252ef37 100644
--- a/target/linux/qualcommax/dts/ipq6018-tplink-eap6xx-outdoor.dtsi
+++ b/target/linux/qualcommax/dts/ipq6018-tplink-eap6xx-outdoor.dtsi
@@ -115,6 +115,8 @@
 
 	rtl8211f_4: ethernet-phy@4 {
 		reg = <4>;
+		realtek,clkout-disable;
+		realtek,aldps-enable;
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623-outdoor-hd-v1.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623-outdoor-hd-v1.dts
index 3aaa32e827..a474c2043f 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623-outdoor-hd-v1.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623-outdoor-hd-v1.dts
@@ -3,145 +3,16 @@
 
 /dts-v1/;
 
-#include "ipq6018.dtsi"
-#include "ipq6018-cp-cpu.dtsi"
-#include "ipq6018-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "ipq6018-tplink-eap6xx-outdoor.dtsi"
 
 / {
 	model = "TP-Link EAP623-Outdoor HD V1.0";
 	compatible = "tplink,eap623-outdoor-hd-v1", "qcom,ipq6018";
-
-	aliases {
-		serial0 = &blsp1_uart3;
-		led-boot = &led_sys_green;
-		led-failsafe = &led_sys_yellow;
-		led-running = &led_sys_green;
-		led-upgrade = &led_sys_yellow;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs-append = " root=/dev/ubiblock0_1";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_sys_green: led-0 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_sys_yellow: led-1 {
-			color = <LED_COLOR_ID_YELLOW>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
-&blsp1_uart3 {
-	pinctrl-0 = <&serial_3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio-pins {
-		mdc {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mdio {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_pins: phy-reset-pin {
-		pins = "gpio77";
-		function = "gpio";
-		bias-pull-up;
-	};
-};
-
-&mdio {
-	status = "okay";
-	reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <10000>;
-	reset-post-delay-us = <50000>;
-	pinctrl-0 = <&mdio_pins>, <&phy_pins>;
-	pinctrl-names = "default";
-
-	rtl8211f: ethernet-phy@4 {
-		reg = <4>;
-
-		realtek,clkout-disable;
-		realtek,aldps-enable;
-	};
-};
-
-&switch {
-	status = "okay";
-	switch_lan_bmp = <ESS_PORT5>; /* lan port bitmap */
-	switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance0*/
-
-	qcom,port_phyinfo {
-		port@5 {
-			port_id = <5>;
-			phy_address = <4>;
-			port_mac_sel = "QGMAC_PORT";
-		};
-	};
-};
-
-&edma {
-	status = "okay";
-};
-
-&dp5 {
-	status = "okay";
-	phy-handle = <&rtl8211f>;
-	phy-mode = "sgmii";
-	label = "lan";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "qcom,smem-part";
-		};
-	};
+&led_sys_yellow {
+		function = LED_FUNCTION_STATUS;
+		gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
 };
 
 &wifi {