mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-03-14 23:09:45 +01:00
mediatek: add support for Airpi AP3000M
This adds support for the Airpi AP3000M 5G CPE based on MediaTek MT7981B.
Specifications:
SoC: MediaTek MT7981B (dual-core ARM Cortex-A53)
RAM: 1GB DDR4
Storage: 8GB or 16GB eMMC
Ethernet: 1x 2.5GbE LAN, 1x 1GbE WAN
Wireless: 2.4GHz/5GHz 802.11ax
Buttons: Reset, WPS
LEDs: System, 2.4GHz WiFi, 5GHz WiFi
Cooling: PWM-controlled fan
Expansion: M.2 slot for 5G modem
The factory partition (mmcblk0p2) is empty in stock firmware.
Execute via SSH before flashing OpenWrt:
```
dd if=/lib/firmware/MT7981_iPAiLNA_EEPROM.bin of=/dev/mmcblk0p2 bs=4k count=1
MAC addresses
```
Fixed MAC addresses are derived by macaddr_generate_from_mmc_cid.
Installation via U-Boot web page
Set static IP 192.168.88.2/255.255.255.0 on your computer.
Connect to the 1GbE port (WAN) and hold the reset button while booting the device. Wait for about 6 seconds, and release the reset button.
Open U-boot web page on your browser at http://192.168.88.1
Select the OpenWRT sysupgrade image, upload it, and start the upgrade.
Wait for automatic reboot.
Installation via sysupgrade
Flash the sysupgrade file via LuCI upgrade page without saving the settings.
Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21397
(cherry picked from commit: 6ff4557317)
Link: https://github.com/openwrt/openwrt/pull/21601
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Fil Dunsky
Hauke Mehrtens
parent
067178b7fd
commit
db694b40c9
6 changed files with 259 additions and 6 deletions
222
target/linux/mediatek/dts/mt7981b-airpi-ap3000m.dts
Normal file
222
target/linux/mediatek/dts/mt7981b-airpi-ap3000m.dts
Normal file
|
|
@ -0,0 +1,222 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Airpi AP3000M";
|
||||
compatible = "airpi,ap3000m", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
serial0 = &uart0;
|
||||
|
||||
led-boot = &led_sys_blue;
|
||||
led-failsafe = &led_sys_blue;
|
||||
led-running = &led_sys_blue;
|
||||
led-upgrade = &led_sys_blue;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "root=PARTLABEL=rootfs rootwait";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_sys_blue: led-0 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
color = <LED_COLOR_ID_ORANGE>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
pinctrl-0 = <&mmc0_pins_default>;
|
||||
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <52000000>;
|
||||
vmmc-supply = <®_3p3v>;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
|
||||
card@0 {
|
||||
compatible = "mmc-card";
|
||||
reg = <0>;
|
||||
|
||||
block {
|
||||
compatible = "block-device";
|
||||
|
||||
partitions {
|
||||
block-partition-factory {
|
||||
partname = "factory";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
reg = <1>;
|
||||
reset-assert-us = <100000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-parent = <&pio>;
|
||||
realtek,aldps-enable;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_pins_default: mmc0-pins-default {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
};
|
||||
|
||||
mmc0_pins_uhs: mmc0-pins-uhs {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "emmc_45";
|
||||
};
|
||||
};
|
||||
|
||||
pwm2_pins: pwm2-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm2";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fan {
|
||||
pwms = <&pwm 2 40000 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci {
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -6,6 +6,10 @@ board=$(board_name)
|
|||
board_config_update
|
||||
|
||||
case $board in
|
||||
airpi,ap3000m)
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "orange:wlan-2ghz" "phy0-ap0" "link tx rx"
|
||||
ucidef_set_led_netdev "wlan5g" "WLAN5G" "white:wlan-5ghz" "phy1-ap0" "link tx rx"
|
||||
;;
|
||||
abt,asr3000)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
|
||||
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0"
|
||||
|
|
|
|||
|
|
@ -88,12 +88,6 @@ mediatek_setup_interfaces()
|
|||
bananapi,bpi-r3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "sfp1 wan"
|
||||
;;
|
||||
bananapi,bpi-r3-mini|\
|
||||
edgecore,eap111|\
|
||||
huasifei,wh3000|\
|
||||
huasifei,wh3000-pro)
|
||||
ucidef_set_interfaces_lan_wan eth0 eth1
|
||||
;;
|
||||
bananapi,bpi-r4)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 sfp-lan" "wan sfp-wan"
|
||||
;;
|
||||
|
|
@ -120,6 +114,13 @@ mediatek_setup_interfaces()
|
|||
zyxel,nwa50ax-pro)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
airpi,ap3000m|\
|
||||
bananapi,bpi-r3-mini|\
|
||||
edgecore,eap111|\
|
||||
huasifei,wh3000|\
|
||||
huasifei,wh3000-pro)
|
||||
ucidef_set_interfaces_lan_wan eth0 eth1
|
||||
;;
|
||||
cudy,m3000-v1|\
|
||||
cudy,tr3000-256mb-v1|\
|
||||
cudy,tr3000-v1|\
|
||||
|
|
@ -206,6 +207,11 @@ mediatek_setup_macs()
|
|||
local label_mac=""
|
||||
|
||||
case $board in
|
||||
airpi,ap3000m)
|
||||
base_mac=$(macaddr_generate_from_mmc_cid mmcblk0)
|
||||
lan_mac="$base_mac"
|
||||
wan_mac="$(macaddr_add "$base_mac" 1)"
|
||||
;;
|
||||
acer,predator-w6|\
|
||||
acer,predator-w6d|\
|
||||
acer,vero-w6m)
|
||||
|
|
|
|||
|
|
@ -33,6 +33,11 @@ case "$board" in
|
|||
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
airpi,ap3000m)
|
||||
base_mac=$(macaddr_generate_from_mmc_cid mmcblk0)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $base_mac 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $base_mac 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
asus,rt-ax59u)
|
||||
CI_UBIPART="UBI_DEV"
|
||||
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
|
||||
|
|
|
|||
|
|
@ -124,6 +124,7 @@ platform_do_upgrade() {
|
|||
acer,predator-w6|\
|
||||
acer,predator-w6d|\
|
||||
acer,vero-w6m|\
|
||||
airpi,ap3000m|\
|
||||
arcadyan,mozart|\
|
||||
glinet,gl-mt2500|\
|
||||
glinet,gl-mt6000|\
|
||||
|
|
@ -345,6 +346,7 @@ platform_copy_config() {
|
|||
acer,predator-w6|\
|
||||
acer,predator-w6d|\
|
||||
acer,vero-w6m|\
|
||||
airpi,ap3000m|\
|
||||
arcadyan,mozart|\
|
||||
glinet,gl-mt2500|\
|
||||
glinet,gl-mt6000|\
|
||||
|
|
|
|||
|
|
@ -348,6 +348,20 @@ $(call Device/adtran_smartrg)
|
|||
endef
|
||||
TARGET_DEVICES += smartrg_sdg-8734
|
||||
|
||||
define Device/airpi_ap3000m
|
||||
DEVICE_VENDOR := Airpi
|
||||
DEVICE_MODEL := AP3000M
|
||||
DEVICE_DTS := mt7981b-airpi-ap3000m
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
|
||||
kmod-hwmon-pwmfan kmod-usb3 f2fsck mkf2fs
|
||||
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += airpi_ap3000m
|
||||
|
||||
define Device/arcadyan_mozart
|
||||
DEVICE_VENDOR := Arcadyan
|
||||
DEVICE_MODEL := Mozart
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue