diff --git a/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dtsi b/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dtsi
index 3147a277ac..c1534b07d3 100644
--- a/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dtsi
+++ b/target/linux/realtek/dts/rtl8380_engenius_ews2910p.dtsi
@@ -35,16 +35,6 @@
 		};
 	};
 
-	gpio-export {
-		compatible = "gpio-export";
-
-		sff-p9-tx-disable {
-			gpio-export,name = "sff-p9-tx-disable";
-			gpio-export,output = <1>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
@@ -76,13 +66,29 @@
 		};
 	};
 
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-gpio-shared {
+		compatible = "i2c-gpio-shared";
 		scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		i2c0: i2c@0 {
+			sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			i2c-gpio,delay-us = <2>;
+		};
+
+		i2c1: i2c@1 {
+			sda-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			i2c-gpio,delay-us = <2>;
+		};
+	};
+
+	sfp0: sfp-p9 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		tx-disable-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		los-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	};
 	sfp1: sfp-p10 {
 		compatible = "sff,sfp";
@@ -111,15 +117,6 @@
 			line-name = "poe-enable";
 		};
 
-		sff_p9_gpios {
-			gpio-hog;
-			gpios = < 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,
-				< 11 GPIO_ACTIVE_HIGH>, /* los-gpio */
-				< 12 GPIO_ACTIVE_LOW>;   /* mod-def0-gpio */
-			input;
-			line-name = "sff-p9-gpios";
-		};
-
 		led-controller {
 			compatible = "realtek,rtl8231-leds";
 			status = "disabled";
@@ -202,8 +199,15 @@
 		SWITCH_PORT(14, 7, internal)
 		SWITCH_PORT(15, 8, internal)
 
-		/* TODO: fixed link SFP is not right */
-		SWITCH_SFP_PORT(24, 9, 1000base-x)
+		port@24 {
+			reg = <24>;
+			label = "lan9";
+			pcs-handle = <&serdes4>;
+			phy-mode = "1000base-x";
+			phy-handle = <&phy24>;
+			managed = "in-band-status";
+			sfp = <&sfp0>;
+		};
 
 		port@26 {
 			reg = <26>;