mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-02-10 02:52:49 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 7

mediatek: filogic: add support for Bazis AX3000WM
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Waiting to run
Details

Browse source 
- SoC: MediaTek MT7981B
 - CPU: 2x 1.3 GHz Cortex-A53
 - Flash: 128 MiB SPI NAND (Winbond W25N01GV)
 - RAM: 256 MiB (Nanya NT5CC128M16JR-EK)
 - WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax)
 - Ethernet: 1x 10/100/1000/2500 Mbps MaxLinear GPY211C WAN, 1x10/100/1000 Mbps MT7981 LAN
 - USB 3.0 port
 - 2x buttons: Reset, Mesh
 - 3x LEDs on top panel (red, green, blue)
 - 3x PHY port LEDs (1 amber, 2 green)
 - Board version: WD830M V2.0
 - Power: 5 VDC, 3 A

UART: internal test points, 3V3 115200 8N1 (RX, TX, GND)

Interface	MAC			Algorithm
LAN (label)	1c:bf:ce:xx:xx:x1	0x4
WAN		1c:bf:ce:xx:xx:x2	0xa
WLAN 2.4G	1c:bf:ce:xx:xx:x3	0x2a
WLAN 5G		1c:bf:ce:xx:xx:x4	0x24

At the moment installation is possible via UART only since SSH root
is password protected.

Set a static ip on the ethernet interface of your PC:
(ip address: 192.168.1.2, subnet mask:255.255.255.0).
Boot into initramfs via TFTP:
```
setenv serverip 192.168.1.2
tftpboot 0x46000000 openwrt-mediatek-filogic-bazis_ax3000wm-initramfs-recovery.itb
bootm 0x46000000
```

Install kmod-mtd-rw and activate it:
```
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
```
Upload to the router and write OpenWrt BL2 and FIP bootloader:
```
mtd write openwrt-mediatek-filogic-bazis_ax3000wm-preloader.bin BL2
mtd write openwrt-mediatek-filogic-bazis_ax3000wm-bl31-uboot.fip FIP
```
Prepare ubi partition:
```
ubidetach -p /dev/mtd4
ubiformat /dev/mtd4 -y
ubiattach -p /dev/mtd4
```

Upgrade via luci web interface with sysupgrade file or by issuing a command:
```
sysupgrade -n openwrt-mediatek-filogic-bazis_ax3000wm-squashfs-sysupgrade.itb
```
Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21813
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Fil Dunsky 2026-02-01 12:33:53 +03:00 • committed by Hauke Mehrtens
parent 6da2890c03
commit 658e4adca4
8 changed files with 674 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
package/boot/uboot-mediatek/Makefile
View file

@ -231,6 +231,18 @@ define U-Boot/mt7981_abt_asr3000
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
endef
define U-Boot/mt7981_bazis-ax3000wm
NAME:=BAZIS AX3000WM
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=bazis_ax3000wm
UBOOT_CONFIG:=mt7981_bazis_ax3000wm
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=spim-nand
BL2_SOC:=mt7981
BL2_DDRTYPE:=ddr3
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
endef
define U-Boot/mt7981_cmcc_a10
NAME:=CMCC A10
BUILD_SUBTARGET:=filogic
@ -1106,6 +1118,7 @@ UBOOT_TARGETS := \
mt7628_ravpower_rp-wd009 \
mt7629_rfb \
mt7981_abt_asr3000 \
mt7981_bazis-ax3000wm \
mt7981_cmcc_a10 \
mt7981_cmcc_rax3000m-emmc-ddr3 \
mt7981_cmcc_rax3000m-emmc-ddr4 \

329
package/boot/uboot-mediatek/patches/502-add-bazis-ax3000wm.patch Normal file
View file

@ -0,0 +1,329 @@
--- /dev/null
+++ b/configs/mt7981_bazis_ax3000wm_defconfig
@@ -0,0 +1,107 @@
+CONFIG_ARM=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="mt7981-bazis-ax3000wm"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_TARGET_MT7981=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
+CONFIG_PRE_CON_BUF_ADDR=0x4007ef00
+CONFIG_DEBUG_UART_BASE=0x11002000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_BOOTDELAY=30
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-bazis-ax3000wm.dtb"
+CONFIG_LOGLEVEL=7
+CONFIG_PRE_CONSOLE_BUFFER=y
+CONFIG_LOG=y
+# CONFIG_BOARD_INIT is not set
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="MT7981> "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_STRINGS=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PSTORE=y
+CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+CONFIG_CMD_UUID=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_UBI_RENAME=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_REDUNDANT=y
+CONFIG_ENV_UBI_PART="ubi"
+CONFIG_ENV_UBI_VOLUME="ubootenv"
+CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
+CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/bazis_ax3000wm_env"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NETCONSOLE=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.1.1"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.1.254"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK=y
+CONFIG_GPIO_HOG=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7981=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_RAM=y
+CONFIG_DM_SERIAL=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_ZSTD=y
+CONFIG_HEXDUMP=y
--- /dev/null
+++ b/arch/arm/dts/mt7981-bazis-ax3000wm.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2026
+ * Author: Fil Dunsky <filipp.dunsky@gmail.com>
+ */
+
+/dts-v1/;
+#include "mt7981.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Bazis AX3000WM";
+ compatible = "bazis,ax3000wm", "mediatek,mt7981";
+
+ chosen {
+ stdout-path = &uart0;
+ tick-timer = &timer0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x10000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ mesh {
+ label = "mesh";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: led_power {
+ label = "blue:power";
+ gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_warning: led_fault {
+ label = "red:fault";
+ gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: led-2 {
+ label = "green:status";
+ gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ mediatek,force-highspeed;
+ status = "okay";
+};
+
+&eth {
+ status = "okay";
+ mediatek,gmac-id = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id03a2.9461";
+ reg = <0x0>;
+ phy-mode = "gmii";
+ };
+ };
+};
+
+&pio {
+ spi_flash_pins: spi0-pins-func-1 {
+ mux {
+ function = "flash";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+};
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x200000>;
+ };
+
+ partition@380000 {
+ label = "FIP";
+ reg = <0x380000 0x200000>;
+ };
+
+ partition@580000 {
+ label = "ubi";
+ reg = <0x580000 0x7a40000>;
+ };
+ };
+ };
+};
+
+&watchdog {
+ status = "disabled";
+};
--- /dev/null
+++ b/defenvs/bazis_ax3000wm_env
@@ -0,0 +1,54 @@
+ipaddr=192.168.1.1
+serverip=192.168.1.254
+loadaddr=0x46000000
+console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
+bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
+bootconf=config-1
+bootdelay=0
+bootfile=openwrt-mediatek-filogic-bazis_ax3000wm-initramfs-recovery.itb
+bootfile_bl2=openwrt-mediatek-filogic-bazis_ax3000wm-preloader.bin
+bootfile_fip=openwrt-mediatek-filogic-bazis_ax3000wm-bl31-uboot.fip
+bootfile_upg=openwrt-mediatek-filogic-bazis_ax3000wm-squashfs-sysupgrade.itb
+bootled_pwr=blue:power
+bootled_rec=red:fault
+bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
+bootmenu_default=0
+bootmenu_delay=0
+bootmenu_title= ( ( ( OpenWrt ) ) )
+bootmenu_0=Initialize environment.=run _firstboot
+bootmenu_0d=Run default boot command.=run boot_default
+bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
+bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
+bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
+bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
+bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
+bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
+bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
+bootmenu_8=Reboot.=reset
+bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
+boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
+boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
+boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
+boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
+boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
+boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
+boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
+reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
+mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
+mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
+ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
+ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
+ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
+ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
+ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
+ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
+ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
+ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
+_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
+_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
+_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"

1
target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
View file

@ -1,5 +1,6 @@
set_preinit_iface() {
case $(board_name) in
bazis,ax3000wm|\
cudy,m3000-v1|\
cudy,tr3000-256mb-v1|\
cudy,tr3000-v1|\

297
target/linux/mediatek/dts/mt7981b-bazis-ax3000wm.dts Normal file
View file

@ -0,0 +1,297 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (c) 2026
* Author: Fil Dunsky <filipp.dunsky@gmail.com>
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "mt7981b.dtsi"
/ {
model = "Bazis AX3000WM";
compatible = "bazis,ax3000wm", "mediatek,mt7981";
aliases {
label-mac-device = &gmac1;
led-boot = &led_status;
led-failsafe = &led_warning;
led-running = &led_status;
led-upgrade = &led_warning;
serial0 = &uart0;
};
chosen: chosen {
stdout-path = "serial0:115200n8";
bootargs = "root=/dev/fit0 rootwait";
rootdisk = <&ubi_rootdisk>;
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
mesh {
label = "mesh";
linux,code = <KEY_RFKILL>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_wlan-2ghz {
function = LED_FUNCTION_WLAN_2GHZ;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_warning: led_fault {
function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
};
led_internet {
function = LED_FUNCTION_WAN_ONLINE;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
};
led_status: led_power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
};
led_wlan-5ghz {
function = LED_FUNCTION_WLAN_5GHZ;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led_lan_back {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
};
};
usb_vbus: regulator-usb {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
phy-handle = <&phy5>;
nvmem-cell-names = "mac-address";
nvmem-cells = <&mac_wan>;
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
nvmem-cell-names = "mac-address";
nvmem-cells = <&mac_lan>;
};
};
&mdio_bus {
reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
reset-delay-us = <600>;
reset-post-delay-us = <20000>;
/* MaxLinear GPY211C 2.5G PHY */
phy5: phy@5 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <5>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_WAN;
};
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand: flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-cal-enable;
spi-cal-mode = "read-data";
spi-cal-datalen = <7>;
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
spi-cal-addrlen = <5>;
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x180000 0x0200000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
mac_lan: macaddr@4 {
reg = <0x4 0x6>;
};
mac_wan: macaddr@a {
reg = <0xa 0x6>;
};
mac_wlan_2ghz: macaddr@2a {
reg = <0x2a 0x6>;
};
mac_wlan_5ghz: macaddr@24 {
reg = <0x24 0x6>;
};
};
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x0200000>;
read-only;
};
ubi: partition@580000 {
label = "ubi";
reg = <0x580000 0x7a40000>;
compatible = "linux,ubi";
volumes {
ubi_rootdisk: ubi-volume-fit {
volname = "fit";
};
ubi_ubootenv: ubi-volume-ubootenv {
volname = "ubootenv";
};
ubi_ubootenv2: ubi-volume-ubootenv2 {
volname = "ubootenv2";
};
};
};
};
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
};
};
&usb_phy {
status = "okay";
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
band@0 {
reg = <0>;
nvmem-cells = <&mac_wlan_2ghz>;
nvmem-cell-names = "mac-address";
};
band@1 {
reg = <1>;
nvmem-cells = <&mac_wlan_5ghz>;
nvmem-cell-names = "mac-address";
};
};
&xhci {
status = "okay";
vbus-supply = <&usb_vbus>;
};

6
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
View file

@ -62,6 +62,12 @@ bananapi,bpi-r4-poe)
bananapi,bpi-r4-lite)
ucidef_set_led_netdev "sfp0" "sfp0" "green:sfp" "sfp0" "link tx rx"
;;
bazis,ax3000wm)
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:05:amber:wan" "eth0" "rx tx"
ucidef_set_led_netdev "wanlink" "WANLINK" "mdio-bus:05:green:wan" "eth0" "link"
ucidef_set_led_netdev "lanlink" "LANLINK" "green:lan" "eth1" "link"
ucidef_set_led_netdev "internet" "internet" "blue:wan-online" "wan" "link"
;;
cudy,re3000-v1|\
kebidumei,ax3000-u22|\
wavlink,wl-wn573hx3)

1
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View file

@ -124,6 +124,7 @@ mediatek_setup_interfaces()
huasifei,wh3000-pro)
ucidef_set_interfaces_lan_wan eth0 eth1
;;
bazis,ax3000wm|\
cudy,m3000-v1|\
cudy,tr3000-256mb-v1|\
cudy,tr3000-v1|\

2
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
View file

@ -87,6 +87,7 @@ platform_do_upgrade() {
bananapi,bpi-r4-2g5|\
bananapi,bpi-r4-poe|\
bananapi,bpi-r4-lite|\
bazis,ax3000wm|\
cmcc,a10-ubootmod|\
cmcc,rax3000m|\
comfast,cf-wr632ax-ubootmod|\
@ -278,6 +279,7 @@ platform_check_image() {
bananapi,bpi-r4-2g5|\
bananapi,bpi-r4-poe|\
bananapi,bpi-r4-lite|\
bazis,ax3000wm|\
cmcc,a10-ubootmod|\
cmcc,rax3000m|\
comfast,cf-wr632ax-ubootmod|\

25
target/linux/mediatek/image/filogic.mk
View file

@ -805,6 +805,31 @@ endif
endef
TARGET_DEVICES += bananapi_bpi-r4-lite
define Device/bazis_ax3000wm
DEVICE_VENDOR := Bazis
DEVICE_MODEL := AX3000WM
DEVICE_DTS := mt7981b-bazis-ax3000wm
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot bazis-ax3000wm
endef
TARGET_DEVICES += bazis_ax3000wm
define Device/buffalo_wsr-6000ax8
DEVICE_MODEL := WSR-6000AX8
DEVICE_VENDOR := Buffalo