ath79: sitecom,wlrx100: use nvmem
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run

Userspace handling is deprecated.

Also use led-sources for simplicity.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20508
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Rosen Penev 2024-06-15 15:13:07 -07:00 committed by Hauke Mehrtens
parent ff1419f895
commit 5e3a602def
5 changed files with 51 additions and 30 deletions

View file

@ -11,6 +11,7 @@
compatible = "sitecom,wlr-7100", "qca,ar9344";
aliases {
label-mac-device = &eth0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
@ -47,12 +48,6 @@
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
};
@ -64,6 +59,9 @@
phy-mode = "rgmii";
phy-handle = <&phy0>;
nvmem-cells = <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "mac-address";
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
@ -95,8 +93,8 @@
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>;
nvmem-cell-names = "calibration";
nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_ethaddr 1>;
nvmem-cell-names = "calibration", "mac-address";
};
};
@ -127,6 +125,14 @@
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
nvmem-layout {
compatible = "u-boot,env";
macaddr_uboot_ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};
};
partition@40000 {
@ -157,6 +163,10 @@
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
cal_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
@ -177,5 +187,11 @@
&wmac {
status = "okay";
qca,no-eeprom;
nvmem-cells = <&cal_art_1000>, <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "calibration", "mac-address";
led {
led-sources = <14>;
led-active-low;
};
};

View file

@ -11,6 +11,7 @@
compatible = "sitecom,wlr-8100", "qca,qca9558";
aliases {
label-mac-device = &eth0;
led-boot = &led_status_amber;
led-failsafe = &led_status_amber;
led-running = &led_status_amber;
@ -48,12 +49,6 @@
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "blue:wifi2g";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wifi5g {
label = "blue:wifi5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
@ -85,6 +80,14 @@
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
nvmem-layout {
compatible = "u-boot,env";
macaddr_uboot_ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};
};
partition@40000 {
@ -121,6 +124,10 @@
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
cal_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
@ -140,8 +147,8 @@
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
nvmem-cells = <&cal_art_5000>;
nvmem-cell-names = "calibration";
nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_ethaddr 1>;
nvmem-cell-names = "calibration", "mac-address";
};
};
@ -175,6 +182,9 @@
phy-handle = <&phy0>;
pll-data = <0xa6000000 0x00000101 0x00001616>;
nvmem-cells = <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "mac-address";
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
@ -183,5 +193,12 @@
&wmac {
status = "okay";
qca,no-eeprom;
nvmem-cells = <&cal_art_1000>, <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "calibration", "mac-address";
led {
led-sources = <19>;
led-active-low;
};
};

View file

@ -808,9 +808,7 @@ ath79_setup_macs()
;;
sitecom,wlr-7100|\
sitecom,wlr-8100)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
label_mac=$lan_mac
;;
tplink,archer-a7-v5|\
tplink,archer-a9-v6|\

View file

@ -15,11 +15,6 @@ case "$FIRMWARE" in
avm,fritzdvbc)
caldata_extract_reverse "urlader" 0x1541 0x440
;;
sitecom,wlr-7100|\
sitecom,wlr-8100)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
;;
moxa,awk-1137c)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env mac_addr)

View file

@ -80,11 +80,6 @@ case "$board" in
# which would allow to patch the macaddress
macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" $PHYNBR > /sys${DEVPATH}/macaddress
;;
sitecom,wlr-7100|\
sitecom,wlr-8100)
[ "$PHYNBR" -eq 0 ] && \
macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3|\