diff --git a/target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts new file mode 100644 index 0000000000..0bee64d7b8 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cudy-wr3000p-v1.dts @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981b-cudy-wr3000-nand.dtsi" + +/ { + model = "Cudy WR3000P v1"; + compatible = "cudy,wr3000p-v1", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + + led_status: led-status { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + + led-internet { + function = LED_FUNCTION_WAN_ONLINE; + color = ; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-wlan2g { + function = LED_FUNCTION_WLAN_2GHZ; + color = ; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-wlan5g { + function = LED_FUNCTION_WLAN_5GHZ; + color = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led-wan { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-usb { + function = LED_FUNCTION_USB; + color = ; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + usb_vbus: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; +}; + +ð { + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy6>; + phy-mode = "2500base-x"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_bdinfo_de00 1>; + label = "wan"; + }; +}; + +&mdio_bus { + phy6: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 3 GPIO_ACTIVE_LOW>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&xhci { + vusb33-supply = <®_3p3v>; + vbus-supply = <&usb_vbus>; + mediatek,u3p-dis-msk = <0x01>; + phys = <&u2port0 PHY_TYPE_USB2>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 217f495f95..950dcf7143 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -42,7 +42,8 @@ wavlink,wl-wn573hx3) cudy,wr3000-v1) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" ;; -cudy,wr3000h-v1) +cudy,wr3000h-v1|\ +cudy,wr3000p-v1) ucidef_set_led_netdev "lan1" "lan1" "white:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan2" "lan2" "white:lan-2" "lan2" "link tx rx" ucidef_set_led_netdev "lan3" "lan3" "white:lan-3" "lan3" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 58672d9d72..fe98657a1a 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -84,6 +84,7 @@ case "$board" in cudy,wr3000e-v1|\ cudy,wr3000s-v1|\ cudy,wr3000h-v1|\ + cudy,wr3000p-v1|\ cudy,wr3000-v1) addr=$(mtd_get_mac_binary bdinfo 0xde00) # Originally, phy0 is phy1 mac with LA bit set. However, this would conflict diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index bd66551198..3cc8b91b74 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -127,7 +127,8 @@ platform_do_upgrade() { CI_KERNPART="linux" nand_do_upgrade "$1" ;; - cudy,wr3000h-v1) + cudy,wr3000h-v1|\ + cudy,wr3000p-v1) CI_UBIPART="ubi" nand_do_upgrade "$1" ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 2cf44bee14..17289675a6 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -856,6 +856,23 @@ define Device/cudy_wr3000h-v1 endef TARGET_DEVICES += cudy_wr3000h-v1 +define Device/cudy_wr3000p-v1 + DEVICE_VENDOR := Cudy + DEVICE_MODEL := WR3000P + DEVICE_VARIANT := v1 + DEVICE_DTS := mt7981b-cudy-wr3000p-v1 + DEVICE_DTS_DIR := ../dts + SUPPORTED_DEVICES += R57 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_IN_UBI := 1 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware +endef +TARGET_DEVICES += cudy_wr3000p-v1 + define Device/dlink_aquila-pro-ai-m30-a1 DEVICE_VENDOR := D-Link DEVICE_MODEL := AQUILA PRO AI M30