mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-02-20 02:21:19 +01:00
qualcommax: ipq50xx: add support for CMCC MR3000D-CI
CMCC MR3000D-CI is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
IPQ5000.
Device specification
--------------------
- SoC : Qualcomm IPQ5018
- RAM : 512 MiB DDR3L
- Flash : 128 MiB SPI-NAND (GigaDevice GD5F1GQ5REYIG)
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : Qualcomm IPQ5018 (SoC)
- 5 GHz : Qualcomm Atheros QCN6102
- Ethernet : 4x 10/100/1000 Mbps
- Switch : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO) : 2x LEDs, 2x Buttons
- UART : Through-hole on PCB
- Voltage : 3.3 V
- Assignment : Silkscreened on PCB
- Settings : 115200n8
- Power : 12 VDC, 1.5 A
Installation
-----------------
1. Telnet method
a. Enable telnet
Log in to http://192.168.10.1/ with the password on the sticker
Modify URL according to example (keep your unique hash after ";stok=")
and press Enter:
http://192.168.10.1/cgi-bin/luci/;stok=78becad1b1490e45be2776025cde2b7d/api/NPCnetwork/ping?url=$(telnetd)
You should get the following in the browser:
{"link":0}
b. Run tftp server on IP 192.168.10.254 and put factory image
'openwrt-qualcommax-ipq50xx-cmcc_mr3000d-ci-squashfs-factory.ubi'
in the tftp root dir.
c. Login to 192.168.10.1 with telnet (user: root, pass: from the
sticker).
d. Download factory image from the tftp:
tftp -l factory.ubi -r openwrt-qualcommax-ipq50xx-cmcc_mr3000d-ci-squashfs-factory.ubi -g 192.168.10.254
e. Flash factory image:
export rootfs=$(cat /proc/mtd | grep rootfs | grep -v _ | cut -d: -f1)
ubidetach -f -p /dev/${rootfs}
ubiformat /dev/${rootfs} -y -f /tmp/factory.ubi
f. Reboot:
reboot
2. U-Boot Method using UBI Image (using UART)
a. Place the factory.ubi file on your TFTP server, enter U-Boot CLI
and exec these commands:
tftpboot <your_tftp_server_ip>:factory.ubi
flash rootfs
reset
3. U-Boot Method using initramfs Image (using UART)
a. Place the openwrt-*-initramfs-fit-uImage.itb file on your TFTP
server and rename it to initramfs.bin
b. Enable serial console, enter to U-Boot CLI and exec these commands:
tftpboot <your_tftp_server_ip>:initramfs.bin
bootm
c. Once boot completed, upload the sysupgrade.bin file to router's
/tmp directory (using scp or wget) and execute the following command
in openwrt shell:
sysupgrade -n /tmp/sysupgrade.bin
MAC Addresses
-------------
+--------------+-------------------+-------------+
| Interface | MAC example | Location |
+--------------+-------------------+-------------+
| LAN | 84:7a:xx:xx:xx:dd | 0:ART, 0x6 |
| WAN (label) | 84:7a:xx:xx:xx:dc | 0:ART, 0x0 |
| WLAN 2.4 GHz | 84:7a:xx:xx:xx:de | 0:ART, 0xc |
| WLAN 5 | 84:7a:xx:xx:xx:df | 0:ART, 0x12 |
+--------------+-------------------+-------------+
Notes
-----
1. U-Boot is protected by a password (pass: netpower).
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21952
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Mikhail Zhilkin
Robert Marko
parent
f5a63c9eda
commit
3a39f682df
7 changed files with 459 additions and 0 deletions
|
|
@ -8,6 +8,7 @@ touch /etc/config/ubootenv
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
cmcc,mr3000d-ci|\
|
||||
cmcc,pz-l8|\
|
||||
elecom,wrc-x3000gs2|\
|
||||
iodata,wn-dax3000gr|\
|
||||
|
|
|
|||
|
|
@ -35,6 +35,7 @@ ALLWIFIBOARDS:= \
|
|||
asus_rt-ax89x \
|
||||
buffalo_wxr-5950ax12 \
|
||||
cambiumnetworks_xe34 \
|
||||
cmcc_mr3000d-ci \
|
||||
cmcc_rm2-6 \
|
||||
compex_wpq873 \
|
||||
dynalink_dl-wrx36 \
|
||||
|
|
@ -226,6 +227,7 @@ $(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
|
|||
$(eval $(call generate-ipq-wifi-package,asus_rt-ax89x,Asus RT-AX89X))
|
||||
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
|
||||
$(eval $(call generate-ipq-wifi-package,cambiumnetworks_xe34,Cambium Networks XE3-4))
|
||||
$(eval $(call generate-ipq-wifi-package,cmcc_mr3000d-ci,CMCC MR3000D-CI))
|
||||
$(eval $(call generate-ipq-wifi-package,cmcc_rm2-6,CMCC RM2-6))
|
||||
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
|
||||
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
|
||||
|
|
|
|||
|
|
@ -0,0 +1,424 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq5018.dtsi"
|
||||
#include "ipq5018-ess.dtsi"
|
||||
#include "ipq5018-qcn6122.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "CMCC MR3000D-CI";
|
||||
compatible = "cmcc,mr3000d-ci", "qcom,ipq5018";
|
||||
|
||||
aliases {
|
||||
label-mac-device = <&dp1>;
|
||||
|
||||
led-boot = &led_status_red;
|
||||
led-failsafe = &led_status_green;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_green;
|
||||
|
||||
serial0 = &blsp1_uart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " root=/dev/ubiblock0_1 swiotlb=1 coherent_pool=2M";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button-0 {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
label = "wps";
|
||||
gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_status_red: led-0 {
|
||||
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led_status_green: led-1 {
|
||||
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-div = <4>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&serial_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qfprom {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
pinctrl-0 = <&qpic_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
// GigaDevice GD5F1GQ5REYIG
|
||||
nand@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
|
||||
nand-ecc-engine = <&qpic_nand>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
|
||||
partition-art {
|
||||
label = "0:art";
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
// WAN MAC address
|
||||
macaddr_art_0: mac-address@0 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x0 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
// LAN MAC address
|
||||
macaddr_art_6: mac-address@6 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x6 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
// WLAN 2.4 GHz MAC address
|
||||
macaddr_art_c: mac-address@c {
|
||||
compatible = "mac-base";
|
||||
reg = <0xc 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
// WLAN 5 GHz MAC address
|
||||
macaddr_art_12: mac-address@12 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x12 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* ===============================================================
|
||||
* _______________________ _______________________
|
||||
* | IPQ5018 | | QCA8337 |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* | | MAC0 |---| GE Phy | | | | Phy0 |---| MAC1 | |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* | | MAC1 |---| Uniphy |-+-SGMII-+-| SerDes |---| MAC6 | |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* |_______________________| |_______________________|
|
||||
*
|
||||
* ===============================================================
|
||||
*/
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
|
||||
|
||||
qcom,port_phyinfo {
|
||||
// MAC0 -> GE Phy -> QCA8337 Phy4
|
||||
port@1 {
|
||||
port_id = <1>;
|
||||
mdiobus = <&mdio0>;
|
||||
phy_address = <7>;
|
||||
};
|
||||
|
||||
// MAC1 ---SGMII---> QCA8337 SerDes
|
||||
port@2 {
|
||||
port_id = <2>;
|
||||
mdiobus = <&mdio1>;
|
||||
forced-speed = <1000>;
|
||||
forced-duplex = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// MAC0 -> GE Phy
|
||||
&dp1 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_art_0 (0)>;
|
||||
};
|
||||
|
||||
// MAC1 -> SGMII
|
||||
&dp2 {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_art_6 (0)>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// MAC0 -> GE Phy -> QCA8337 Phy4
|
||||
&ge_phy {
|
||||
qcom,dac-preset-short-cable;
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio1_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
|
||||
|
||||
// QCA8337 Phy0 -> LAN3
|
||||
qca8337_0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy1 -> LAN2
|
||||
qca8337_1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy2 -> LAN1
|
||||
qca8337_2: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy3 -> WAN
|
||||
qca8337_3: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy4 -> IPQ5018 GE Phy
|
||||
qca8337_4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
// QCA8337 switch
|
||||
switch1: ethernet-switch@17 {
|
||||
compatible = "qca,qca8337";
|
||||
reg = <17>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
phy-handle = <&qca8337_0>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
phy-handle = <&qca8337_1>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
phy-handle = <&qca8337_2>;
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
phy-handle = <&qca8337_3>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0 (0)>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
phy-mode = "sgmii";
|
||||
ethernet = <&dp2>;
|
||||
qca,sgmii-enable-pll;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
button_pins: button-state {
|
||||
button-pins {
|
||||
pins = "gpio27", "gpio38";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
led_pins: led-state {
|
||||
pins = "gpio30", "gpio46";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
mdio1_pins: mdio-state {
|
||||
mdc-pins {
|
||||
pins = "gpio36";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio-pins {
|
||||
pins = "gpio37";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
qpic_pins: qpic-state {
|
||||
clock-pins {
|
||||
pins = "gpio9";
|
||||
function = "qspi_clk";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cs-pins {
|
||||
pins = "gpio8";
|
||||
function = "qspi_cs";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
||||
function = "qspi_data";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
serial_0_pins: uart0-state {
|
||||
pins = "gpio28", "gpio29";
|
||||
function = "blsp0_uart1";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
switch_reset_pins: switch-reset-state {
|
||||
pins = "gpio39";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
&q6v5_wcss {
|
||||
status = "okay";
|
||||
|
||||
/* The QCN6102 radio should map to UPD ID 2. Without */
|
||||
/* bootargs, the firmware will expect it to be on UPD ID 3 */
|
||||
boot-args = <
|
||||
/* type: */ 0x1 /* PCIE0 */
|
||||
/* length: */ 4
|
||||
/* UPD ID: */ 2
|
||||
/* reset GPIO: */ 15
|
||||
/* reserved: */ 0 0>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
// IPQ5018
|
||||
status = "okay";
|
||||
|
||||
qcom,rproc = <&q6_wcss_pd1>;
|
||||
qcom,ath11k-calibration-variant = "CMCC-MR3000D-CI";
|
||||
qcom,ath11k-fw-memory-mode = <1>;
|
||||
qcom,bdf-addr = <0x4c400000>;
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
// QCN6102 5G
|
||||
status = "okay";
|
||||
|
||||
qcom,rproc = <&q6_wcss_pd2>;
|
||||
qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
|
||||
qcom,ath11k-calibration-variant = "CMCC-MR3000D-CI";
|
||||
qcom,ath11k-fw-memory-mode = <1>;
|
||||
qcom,bdf-addr = <0x4d100000>;
|
||||
qcom,m3-dump-addr = <0x4df00000>;
|
||||
};
|
||||
|
|
@ -19,6 +19,22 @@ define Build/mstc-header
|
|||
rm -f $@.crclen
|
||||
endef
|
||||
|
||||
define Device/cmcc_mr3000d-ci
|
||||
$(call Device/FitImageLzma)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := CMCC
|
||||
DEVICE_MODEL := MR3000D-CI
|
||||
DEVICE_DTS_CONFIG := config@mp03.3-m1
|
||||
SOC := ipq5018
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE_SIZE := 59392k
|
||||
NAND_SIZE := 128m
|
||||
DEVICE_PACKAGES := ath11k-firmware-ipq5018-qcn6122 \
|
||||
ipq-wifi-cmcc_mr3000d-ci
|
||||
endef
|
||||
TARGET_DEVICES += cmcc_mr3000d-ci
|
||||
|
||||
define Device/cmcc_pz-l8
|
||||
$(call Device/FitImageLzma)
|
||||
$(call Device/UbiFit)
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@ ipq50xx_setup_interfaces()
|
|||
glinet,gl-b3000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
|
||||
;;
|
||||
cmcc,mr3000d-ci|\
|
||||
cmcc,pz-l8|\
|
||||
linksys,mx2000|\
|
||||
linksys,mx5500|\
|
||||
|
|
|
|||
|
|
@ -9,6 +9,13 @@ board=$(board_name)
|
|||
case "$FIRMWARE" in
|
||||
"ath11k/IPQ5018/hw1.0/cal-ahb-c000000.wifi.bin")
|
||||
case "$board" in
|
||||
cmcc,mr3000d-ci)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
wlan_mac=$(mtd_get_mac_binary 0:art 12)
|
||||
ath11k_patch_mac $wlan_mac 0
|
||||
ath11k_set_macflag
|
||||
ath11k_remove_regdomain
|
||||
;;
|
||||
elecom,wrc-x3000gs2|\
|
||||
iodata,wn-dax3000gr|\
|
||||
zyxel,scr50axe)
|
||||
|
|
@ -54,6 +61,13 @@ case "$FIRMWARE" in
|
|||
;;
|
||||
"ath11k/QCN6122/hw1.0/cal-ahb-b00a040.wifi.bin")
|
||||
case "$board" in
|
||||
cmcc,mr3000d-ci)
|
||||
caldata_extract "0:art" 0x26800 0x20000
|
||||
wlan_mac=$(mtd_get_mac_binary 0:art 18)
|
||||
ath11k_patch_mac $wlan_mac 0
|
||||
ath11k_remove_regdomain
|
||||
ath11k_set_macflag
|
||||
;;
|
||||
elecom,wrc-x3000gs2|\
|
||||
iodata,wn-dax3000gr|\
|
||||
zyxel,scr50axe)
|
||||
|
|
|
|||
|
|
@ -179,6 +179,7 @@ platform_pre_upgrade() {
|
|||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
cmcc,mr3000d-ci|\
|
||||
cmcc,pz-l8|\
|
||||
elecom,wrc-x3000gs2|\
|
||||
iodata,wn-dax3000gr)
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue