As demonstrated by the inability to use existing WCN6750 firmware on
QCM6490 / QCS6490 devices, such firmware files are device-specific. As a
preparation to adding more device-specific firmware, move existing
firmware to the sc7280/ subdir, squashing it in proceess. Squashing it
simplifies loading (as it requires just a single file access / userspace
call) and also it requires just a single compatibility symlink instead
of ten.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This version is required to support ARL-H.
Release: 102.1.15.1926
Compatibility (API) Version: 1.0
SVN: 1
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
This firmware was extracted from the vendor driver
rtl8192FU_rtl8725AU_WiFi_linux_v5.15.2-53-g9bfbc74cf.20230615_COEX20220422-2b07
provided by Realtek developer.
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
This patch adds the firmware files for the Cirrus CS35L56 smart
amplifier used in a Lenovo laptop.
- 17aa380e
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
This patch adds the firmware files for the Cirrus CS35L56 smart
amplifier used in two ASUS laptops.
- 10431e13
- 10431f43
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Using link-to-a-link reduces legibility and changes to the root link,
also changes the leafs. Where the latter may be undesired and in some
cases just wrong.
We have a couple of instances in-tree, so fix them up and ban the
combination.
One particularly good example, why we'd want this is:
https://gitlab.com/kernel-firmware/linux-firmware/-/merge_requests/272
In there we have the following:
File: ti/tas2781/TAS2XXX1EB30.bin
[snip]
Link: TAS2XXX1EB3.bin -> ti/tas2781/TAS2XXX1EB3.bin
Link: ti/tas2781/TAS2XXX1EB3.bin -> TAS2XXX1EB30.bin
Link: TAS2XXX1EB30.bin -> ti/tas2781/TAS2XXX1EB30.bin
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This allows compatibility with old and new TAS drivers.
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The new rtl8192du driver will support this chip.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Add below required Bluetooth firmware files for Qualcomm SoC WCN785x
which uses UART as HCI transport, and the firmware version is 2.0.1-00349.
qca/hmtbtfw20.tlv : RAMPATCH
qca/hmtnv20.b10f : NVM
qca/hmtnv20.b112 : NVM
qca/hmtnv20.bin : NVM
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
The FriendlyElec NanoPi M4 has a AP6356S WiFi/BT module
so we can reuse the NVRAM like devices with the same
module.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Add the secure firmware and also update the following gpu firmwares:
qcom/a660_gmu.bin: v3.01.0B
qcom/a660_sqe.fw: v1.12
qcom/qcm6490/a660_zap.mbn: v0.09
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Add the following gpu related firmwares for SA8775P chipset:
qcom/a663_gmu.bin: v3.05.01
qcom/sa8775p/a663_zap.mbn: v0.09
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
* Fix disconnect from AP after resuming from wowlan mode.
* Add rtw8922a_fw-2.bin for format change of RX DCK
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Qcom jsons must not be compressed.
Fixes: 541f96c0fa ("qcom: qcm6490: add ADSP and CDSP firmware")
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Add Linux firmware to be used for Qualcomm QCM6490 IDP and
Qualcomm RB3 Gen 2 Development Kit. Most of the firmware files are
common, IPA block is only present on the QCM6490 hardware.
- ADSP.HT.5.5.c8-00149-KODIAK-1
- CDSP.HT.2.5.c3-00077-KODIAK-1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
