iopsys-feed/qosmngr/files/linux/lib/qos/qos.sh

#!/bin/sh
. /lib/functions.sh
#set -x

# include common code
. /lib/qos/ip_rule.sh
. /lib/qos/iptables.sh
. /lib/qos/ebtables.sh
. /lib/qos/classify.sh

MAJOR=""

POLICER_COUNT=0
Q_COUNT=0
SP_Q_PRIO=7

get_rate_per_queue() {
	echo "1000000"
}

get_burst_size_per_queue() {
	echo "1500"
}

# Function to handle a queue order and
# update total number of queues
handle_q_order() {
	local qid="$1" #queue section ID

	config_get is_enable "$qid" "enable" 1

	# No need to configure disabled queues
	if [ $is_enable == '0' ]; then
		return
	fi

	config_get ifname "$qid" "ifname"
	# If ifname is empty that is good enough to break
	if [ -z "$ifname" ];then
		return
	fi

	# Create precedence file containing queue order per
	# interface.
	local precedence_file="/tmp/qos/$ifname/q_order"
	local q_no=$(cat /tmp/qos/$ifname/q_idx)

	config_get precedence "$qid" "precedence"
	value=${precedence}_q${q_no}
	echo $value >> $precedence_file

	# Update the number of queues per interface.
	q_no=$((q_no + 1))
	echo $q_no > /tmp/qos/$ifname/q_idx
}

# Sort queue, lower value in uci means higher precedence, so this
# function sorts the precedence in decending order
sort_q_by_precedence() {
	ifname="$1"

	local order_file="/tmp/qos/$ifname/q_order"
	local tmp_order_file="/tmp/qos/$ifname/q_order.tmp"

	sort -n -k1 $order_file > $tmp_order_file
	cp $tmp_order_file $order_file
	rm -f $tmp_order_file
}

sort_by_precedence() {
	for interf in $(db -q get hw.board.ethernetPortOrder); do
		sort_q_by_precedence $interf
	done
}

# function to handle a queue section
handle_queue() {
	local qid="$1" #queue section ID
	local port="$2"
	local port_bw="$3"
	local root="$4"
	local port_bs="$5"
	local priority=0
	config_get is_enable "$qid" "enable"

	# no need to configure disabled queues
	if [ "$is_enable" == "0" ]; then
		return
	fi

	config_get ifname "$qid" "ifname"
	# if ifname is empty that is good enough to break
	if [ -z "$ifname" ];then
		return
	fi

	# This is to get the qid per interface.
	if [ "$port" != "$ifname" ]; then
		return
	fi

	local precedence_file="/tmp/qos/$ifname/q_order"

	local temp_order=0
	while read -r line; do
		line_qid=${line: -1}
		if [ "$line_qid" == "$Q_COUNT" ]; then
			break
		fi
		temp_order=$((temp_order + 1))
	done < "$precedence_file"

	# precedence_file so the order is calculated accordingly.
	local order=`expr $SP_Q_PRIO - $temp_order`

	config_get sc_alg "$qid" "scheduling"
	config_get wgt "$qid" "weight" 1
	config_get rate "$qid" "rate"
	config_get bs "$qid" "burst_size"
	config_get qsize "$qid" "queue_size" 1024

	[ "$rate" == "0" ] && rate="$port_bw"
	[ "$bs" == "0" ] && bs="$port_bs"

	local salg=1

	case "$sc_alg" in
		"SP") salg=1
		;;
		"WRR") salg=2
		;;
		"WDRR") salg=3
		;;
		"WFQ") salg=4
		;;
	esac

	# ignore precedence value in case of WRR, broadcom recommends that WRR queue should
	# always have precedence value set to 0
	if [ $salg -ne 2 ]; then
	       priority=$order
	fi
	if [ $order -ne 0 ]; then
		if [ $salg -eq 2 ]; then
			tc class add dev $port parent ${root}: classid ${root}:$order cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $priority weight $wgt  avpkt 1500 bounded isolated
		else
			tc class add dev $port parent ${root}: classid ${root}:$order cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $priority  avpkt 1500 bounded isolated
		fi
		tc filter add dev $port parent ${root}:0 prio $order handle $order fw classid ${root}:$order
	fi
	Q_COUNT=$((Q_COUNT + 1))
}

iptables_set_traffic_class() {
	IP_RULE="$IP_RULE -j MARK --set-mark $1"
}

ebt_match_ipv6_dscp() {
	#when ethertype is not configured by user then both proto rules of ipv4
	#and ipv6 to be installed so update BR6_RULE string as well otherwise
	#update BR_RULE only for installation of ipv6 proto rule only.
	if [ ! -z "$BR6_RULE" ]; then
		BR6_RULE="$BR6_RULE --ip6-tclass $1"
	else
		BR_RULE="$BR_RULE --ip6-tclass $1"
	fi
}

broute_filter_on_dscp() {
	# The broadcom option --ip-dscp-extend actually accepts tos
	# and not dscp and that too in hex, hence, perform the conversion
	# from dscp in uci to tos first and then convert to hex
	tos_val=$(($1<<2))
	tos_hex=$(printf "%x" $tos_val)
	BR_RULE="$BR_RULE --ip-dscp-extend $tos_hex"
}

broute_ipv4_rule_options()
{
	local cid=$1
	config_get protocol "$cid" "proto"
	config_get dscp_filter "$cid" "dscp_filter"

	set_ip_addr $cid ebt_match_src_ip ebt_match_dst_ip

	if [ ! -z $dscp_filter ]; then
		broute_filter_on_dscp "$dscp_filter"
	fi

	if [ ! -z $protocol ]; then
		local proto_num=$(protocol_string_to_num "$protocol")
		ebt_match_ip_protocol "$proto_num"

		#port installation for protol tcp/udp/sctp
		if [ $proto_num = "6" ] || [ $proto_num = "17" ] || [ $proto_num = "132" ] ; then
			set_ports "$cid" ebt_match_ip_src_port ebt_match_ip_dst_port
		fi
	fi
}

broute_ipv6_rule_options()
{
	local cid=$1

	config_get protocol "$cid" "proto"
	config_get dscp_filter "$cid" "dscp_filter"

	set_ip_addr $cid ebt_match_ipv6_src_ip ebt_match_ipv6_dst_ip

	if [ ! -z $dscp_filter ]; then
		local tos_val
		local tos_hex

		tos_val=$(($dscp_filter<<2))
		tos_hex=$(printf "%x" $tos_val)
		ebt_match_ipv6_dscp "$tos_hex"
	fi

	if [ ! -z $protocol ]; then
		local proto_num=$(protocol_string_to_num "$protocol")
		ebt_match_ipv6_protocol "$proto_num"

		#port installation for protol tcp/udp/sctp
		if [ $proto_num = "6" ] || [ $proto_num = "17" ] || [ $proto_num = "132" ]; then
			set_ports "$cid" ebt_match_ipv6_src_port ebt_match_ipv6_dst_port
		fi
	fi
}

broute_rule_set_traffic_class() {
	#when ethertype is not configured by user then both proto rules of ipv4
	#and ipv6 to be installed so update BR6_RULE string as well otherwise
	#update BR_RULE only for installation of ipv6 proto rule only.
	BR_RULE="$BR_RULE -j mark --mark-or 0x$1 --mark-target ACCEPT"
	if [ ! -z "$BR6_RULE" ]; then
		BR6_RULE="$BR6_RULE -j mark --mark-or 0x$1 --mark-target ACCEPT"
	fi
}

#function to handle a policer section
handle_policer() {
	local p_sec="$1" # policer section ID
	local dir=1 # default direction, upstream

	config_get is_enable "$p_sec" "enable"

	#no need to configure disabled policer
	if [ $is_enable == '0' ]; then
		return
	fi

	POLICER_COUNT=$((POLICER_COUNT + 1))
}

handle_policer_rules() {
	local c_sec=$1
	local policer_name
	local ifname
	local pname
	local pindex=-1
	local ingress_rate=0
	local in_burst_size=0

	config_get policer_name "$c_sec" "policer"
	if [ -z "$policer_name" ];then
		# no need to apply policer if policer not present in this
		# classification rule
		return
	fi

	config_get ifname "$c_sec" "ifname"
	if [ -z "$ifname" ]; then
		# cannot associate policer as interface is not mentioned
		return
	fi

	local i=0
	local max_policer_inst=$(cat /tmp/qos/max_policer_inst)
	while :
	do
		if [ $i -eq $max_policer_inst ]; then
			break
		fi

		pname="$(uci -q get qos.@policer[$i].name)"
		if [ "$policer_name" == "$pname" ]; then
			pindex=$i
			ingress_rate=$(uci -q get qos.@policer[$i].committed_rate)
			in_burst_rate=$(uci -q get qos.@policer[$i].committed_burst_size)
			break
		fi
		i=$((i + 1))
	done

	if [ $pindex -lt 0 ]; then
		# policer not found, no need to proceed further
		return
	fi

	config_ingress_rate_limit $ifname $ingress_rate $in_burst_size $pindex

}

config_ingress_rate_limit() {
	local ifname="$1"
	local ingress_rate=$2
	local in_burst_size=$3
	local pindex="$4"
	local wanport="$(db -q get hw.board.ethernetWanPort)"

	# Unit in uci file is in bps while that accepted by ethswctl is kbits
	if [ $ingress_rate -lt 1000 ]; then
		return
	fi

	ingress_rate=$((ingress_rate / 1000))

	if [ $in_burst_size -eq 0 ]; then
		in_burst_size=$ingress_rate
	else
		in_burst_size=$((in_burst_size / 1000))
	fi

	tc qdisc add dev $ifname ingress

	tc filter add dev $ifname parent ffff: protocol ip prio $pindex u32 match ip src 0.0.0.0/0 police rate ${ingress_rate}kbit burst $in_burst_size drop flowid :$pindex

}

pre_configure_queue() {
	# Delete queues
	for intf in $(db get hw.board.ethernetPortOrder); do
		rm -rf /tmp/qos/$intf

		mkdir -p /tmp/qos/$intf
		touch /tmp/qos/$intf/q_order
		touch /tmp/qos/$intf/q_idx
		echo 0 > /tmp/qos/$intf/q_idx

		tc qdisc del dev $intf root
		tc qdisc del dev $intf ingress
	done
}

get_link_rate() {                     
        intf="$1"              
        speed=0   
        config_load ports               
        get_speed() {
                psid="$1"                     
                iname="$2"
                config_load ports             
                config_get ifname "$psid" "ifname"
                if [ "$ifname" == "$iname" ]; then
                        config_get speed "$psid" "speed"
                fi
        }                                
        config_foreach get_speed ethport $intf           
        echo "$speed"           
}                   

configure_queue() {
	qdisc_idx=0
	local bs=1500
	local rate=0
	# Load UCI file
	config_load qos
	config_foreach handle_q_order queue
	sort_by_precedence

	get_intf_shaper_config() {
		local b_size
		sid="$1" #shaper section ID

		config_get is_enable "$sid" "enable"
		# no need to configure disabled queues
		if [ "$is_enable" == "0" ]; then
			return
		fi


		config_get ifname "$sid" "ifname"
		# if ifname is empty that is good enough to break
		if [ -z "$ifname" ] || ! [ "$ifname" == "$2" ];then
			return
		fi

		config_get rate "$sid" "rate"
		# Convert the rate from bps to kbps.
		if [ $rate -lt 1000 ];then
			return
		fi

		rate=$(( rate / 1000 ))
		config_get b_size "$sid" "burst_size"
		if [ "$b_size" == "0" ]; then
			bs="$b_size"
		fi
	}
	local wanport="$(db -q get hw.board.ethernetWanPort)"
	for interf in $(db -q get hw.board.ethernetPortOrder); do
		Q_COUNT=0
		rate=0
		# sp queue have max priority value = no. of queue configured on the port
		# hence read and update SP_Q_PRIO here
		local q_no=$(cat /tmp/qos/$interf/q_idx)
		SP_Q_PRIO=`expr $q_no - 1`
		qdisc_idx=`expr $qdisc_idx + 1`
		# link_rate is in mbps and rate is in kbp
		link_rate=$(get_link_rate "$interf")
		# Read the shaper configuration for interface
		config_foreach get_intf_shaper_config shaper $interf
		if [ "$rate" == "0" ]; then
			rate=$(( link_rate * 1000 ))
		fi

		# TODO using 1500 as allot and avpkt, if shaper config exist for interf get burst_size of shaper for actual value
		tc qdisc add dev $interf root handle ${qdisc_idx}: cbq allot $bs  avpkt 1500 bandwidth ${rate}kbit
		# if qdisc_idx is the index corresponds to WAN port, then
		# it would be the MAJOR portion of the destination class ID.
		# under the same qdisc. We are programming for WAN port only.
		if [ "$interf" == "$wanport" ]; then
			MAJOR="$qdisc_idx"
		fi

		config_foreach handle_queue queue $interf $rate $qdisc_idx $bs
	done
}

configure_policer() {

        # Delete policer
        local i=0
        local max_p_inst=0
        if [ -f "/tmp/qos/max_policer_inst" ]; then
                max_p_inst=$(cat /tmp/qos/max_policer_inst)
        fi

        # reset the policer counter
        echo 0 > /tmp/qos/max_policer_inst
        # Load UCI file
        config_load qos
        config_foreach handle_policer policer
        echo $POLICER_COUNT > /tmp/qos/max_policer_inst
}

configure_qos() {
	pre_configure_queue
	configure_queue
	configure_classify
	configure_policer
}

reload_qos() {
	local service_name="$1"

	if [ -z "$service_name" ]; then
		configure_qos
	elif [ "$service_name" == "queue" ]; then
		pre_configure_queue
		configure_queue
        elif [ "$service_name" == "classify" ]; then
                configure_classify
	elif [ "$service_name" == "policer" ]; then
		configure_policer
	fi
}

reload_qos_service() {
	reload_qos
}