iopsys-feed/map-agent/files/etc/init.d/mapagent

#!/bin/sh /etc/rc.common

START=98
STOP=20

USE_PROCD=1

IS_CFG_VALID=1

MAP_DEV="map_dev"
MAP_IF="map"


start_dynbhd_service() {
	rm -f /var/run/multiap/multiap.backhaul
	procd_open_instance
	procd_set_param command "/usr/sbin/dynbhd"
	procd_set_param respawn
#	procd_set_param stdout 1
#	procd_set_param stderr 1
	procd_close_instance
}

validate_agent_section() {
	uci_validate_section mapagent agent "agent" \
		'enabled:bool:true' \
		'debug:range(0,16)' \
		'profile:range(1,4):2' \
		'brcm_setup:bool:false' \
		'controller_macaddr:macaddr' \
		'al_bridge:string' \
		'netdev:string' \
		'vlan_segregation:bool:false' \
		'resend_num:uinteger:0' \
		'dyn_cntlr_sync:bool:true' \
		'island_prevention:bool:false' \
		'eth_onboards_wifi_bhs:bool:false' \
		'scan_on_boot_only:bool:false'


	[ "$?" -ne 0 ] && {
		logger -s -t "mapagent" "Validation of agent section failed"
		IS_CFG_VALID=0
		return 1
	}
	return 0
}

validate_cs_section() {
	local section="$1"

	uci_validate_section mapagent $section "${section}" \
		'local:bool:false' \
		'id:string' \
		'probe_int:range(0,1000):20' \
		'retry_int:range(0,255):3' \
		'autostart:bool:false'

	[ "$?" -ne 0 ] && {
		logger -s -t "mapagent" "Validation of controller_select section failed"
		IS_CFG_VALID=0
		return 1
	}
	return 0
}

validate_ap_section() {
	local section="$1"

	uci_validate_section mapagent $section "${1}" \
			'ifname:string' \
			'device:string' \
			'band:or("2", "5", "6")' \
			'enabled:bool:true' \
			'onboarded:bool:false' \
			'ssid:string' \
			'key:string' \
			'encryption:string' \
			'disallow_bsta_p1:bool:false' \
			'disallow_bsta_p2:bool:false'

	[ "$?" -ne 0 ] && {
		logger -s -t "mapagent" "Validation of ap section failed"
		IS_CFG_VALID=0
		return 1
	}
	return 0
}

validate_radio_section() {
	local section="$1"

	uci_validate_section mapagent $section "${1}" \
			'device:string' \
			'band:or("2", "5", "6")' \
			'configured:bool:false' \
			'onboarded:bool:false' \
			'dedicated_backhaul:bool:false' \
			'steer_policy:range(0,255)' \
			'util_threshold:range(0,255)' \
			'rcpi_threshold:range(0,255)' \
			'report_rcpi_threshold:range(0,255)' \
			'include_sta_stats:bool:false' \
			'include_sta_metric:bool:false' \
			'rcpi_hysteresis_margin:range(0,255)' \
			'report_util_threshold:range(0,255)' \
			'encryption:or("sae", "sae+aes", "psk2",
				"psk2+aes", "sae-mixed", "sae-mixed+aes",
				"none", "psk-mixed", "psk-mixed+aes",
				"wpa", "wpa+aes", "wpa2", "wpa2+aes",
				"psk", "psk+aes")' \

	[ "$?" -ne 0 ] && {
		logger -s -t "mapagent" "Validation of radio section failed"
		IS_CFG_VALID=0
		return 1
	}
	return 0
}

validate_policy_section() {
	local section="$1"

	uci_validate_section mapagent $section "${1}" \
			'report_interval:range(0,255)' \
			'pvid:uinteger' \
			'report_interval:range(0,255)' \
			'pcp_default:range(0,255)' \
			'report_scan:bool' \
			'report_sta_assocfails:bool' \
			'report_sta_assocfails_rate:uinteger' \
			'steer_exclude:list(macaddr)' \
			'steer_exclude_btm:list(macaddr)' \

	[ "$?" -ne 0 ] && {
		logger -s -t "mapagent" "Validation of policy section failed"
		IS_CFG_VALID=0
		return 1
	}
	return 0
}

validate_dyn_bh_section() {
	local section="$1"

	uci_validate_section mapagent $section "${1}" \
			'missing_bh_timer:range(1,255)'
	uci_validate_section mapagent $section "${1}" \
			'missing_bh_reconfig_timer:range(0,65535)'

	[ "$?" -ne 0 ] && {
		logger -s -t "mapagent" "Validation of dynamic backhaul section failed"
		IS_CFG_VALID=0
		return 1
	}
	return 0
}

validate_agent_config() {
	IS_CFG_VALID=1

	validate_agent_section &&
		config_foreach validate_cs_section controller_select &&
		config_foreach validate_ap_section ap &&
		config_foreach validate_radio_section radio &&
		config_foreach validate_policy_section policy &&
		config_foreach validate_dyn_bh_section dynamic_backhaul

	[ "$IS_CFG_VALID" -ne 1 ] && {
		logger -s -t "mapagent" "Validation of mapagent UCI file failed"
		return 1
	}
	return 0
}

create_dir() {
        mkdir -p /var/run/multiap
        mkdir -p /etc/multiap
}

start_service() {
	if [ -f /usr/sbin/dynbhd ]; then
		# Start dynbhd only if the device is operating in extender/repeater mode
		al_bridge="$(uci -q get mapagent.agent.al_bridge)"
		if [ "${al_bridge:0:3}" = "br-" ]; then
			al_brnet="${al_bridge:3}"
			if [ "$(uci -q get network.${al_brnet}.proto)" == "dhcp" ]; then
				start_dynbhd_service
			fi
		fi
	fi

	config_load "mapagent"
	validate_agent_config || return 1;

	ubus -t 5 wait_for wifi

	sleep 2

	local enabled
	config_get_bool enabled agent enabled 1
	[ "$enabled" -eq 0 ] && return 1

	procd_open_instance
	create_dir
	procd_set_param command "/usr/sbin/mapagent" "-d"
	procd_set_param respawn
#	procd_set_param stdout 1
#	procd_set_param stderr 1
	procd_close_instance
}

service_triggers()
{
	procd_add_reload_trigger "mapagent"
}

reload_service() {
	stop
	start
}

boot() {
	/lib/wifi/multiap conf
	start
}