iopsys-feed/layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate

#!/bin/sh

hasEthWan="$(db -q get hw.board.hasEthWan)"
hasEthWan=${hasEthWan:-1}
hasAdsl="$(db -q get hw.board.hasAdsl)"
hasVdsl="$(db -q get hw.board.hasVdsl)"

LANPORTS="$(db -q get hw.board.ethernetLanPorts)"

ETHDEV=""
PTMDEV=""
ATMDEV=""
WANIFACE=""

device_config_exists() {
	ubus call uci get '{"config":"network","type":"device"}' | grep -w name | grep -qw "$1" && return 0
	return 1
}


populate_dsl_settings() {
	if [ "$hasAdsl" == "0" -a "$hasVdsl" == "0" ]; then
		rm -f /etc/config/dsl
		return
	else
		touch /etc/config/dsl
	fi

	if ! uci -q get dsl.line >/dev/null; then
		uci -q set dsl.line="dsl-line"
		if [ "$hasAdsl" == "1" ]; then
			# Mode
			uci -q add_list dsl.line.mode=gdmt
			uci -q add_list dsl.line.mode=glite
			uci -q add_list dsl.line.mode=t1413
			uci -q add_list dsl.line.mode=adsl2
			uci -q add_list dsl.line.mode=adsl2p
			uci -q add_list dsl.line.mode=annexl
			uci -q add_list dsl.line.mode=annexm
			uci -q add_list dsl.line.mode=vdsl2
			#uci -q add_list dsl.line.mode=gfast
		fi

		if [ "$hasVdsl" == "1" ]; then
			# Mode
			uci -q add_list dsl.line.mode=vdsl2

			# Profile
			uci -q add_list dsl.line.profile=8a
			uci -q add_list dsl.line.profile=8b
			uci -q add_list dsl.line.profile=8c
			uci -q add_list dsl.line.profile=8d
			uci -q add_list dsl.line.profile=12a
			uci -q add_list dsl.line.profile=12b
			uci -q add_list dsl.line.profile=17a
			uci -q add_list dsl.line.profile=30a
			#uci -q add_list dsl.line.profile=35b

			# Capability
			uci -q set dsl.line.us0=1
		fi

		# Capability
		uci -q set dsl.line.bitswap=1
		uci -q set dsl.line.sra=1
	fi

	uci -q commit dsl
}

populate_atm_device() {
	[ "$hasAdsl" == "0" ] && return

	# ATM Device
	if ! uci -q get dsl.@atm-device[0] >/dev/null; then
		uci -q set dsl.atm0=atm-device
		uci -q set dsl.atm0.name="ATM835"
		uci -q set dsl.atm0.device="atm0"
		uci -q set dsl.atm0.vpi="8"
		uci -q set dsl.atm0.vci="35"
		uci -q set dsl.atm0.qos_class="ubr"
		uci -q set dsl.atm0.link_type="eoa"
		uci -q set dsl.atm0.encapsulation="llc"
		uci -q commit dsl
	else
		ATMDEV="$(uci -q get dsl.@atm-device[0].device)"
	fi

	ATMDEV="${ATMDEV:-atm0}"

	WANIFACE="$ATMDEV.1"

	device_config_exists "$WANIFACE" && return

	uci -q set network.atmwan=device
	uci -q set network.atmwan.type=untagged
	uci -q set network.atmwan.ifname="$ATMDEV"
	uci -q set network.atmwan.name="$WANIFACE"
}

populate_ptm_device() {
	[ "$hasVdsl" == "0" ] && return

	# PTM Device
	if ! uci -q get dsl.@ptm-device[0] >/dev/null; then
		uci -q set dsl.ptm0=atm-device
		uci -q set dsl.ptm0.name="PTM"
		uci -q set dsl.ptm0.device="ptm0"
		uci -q set dsl.ptm0.priority="1"
		uci -q set dsl.ptm0.portid="1"
		uci -q commit dsl
	else
		PTMDEV="$(uci -q get dsl.@ptm-device[0].device)"
	fi

	PTMDEV="${PTMDEV:-ptm0}"

	WANIFACE="$PTMDEV.1"

	device_config_exists "$PTMDEV" && return

	uci -q set network.ptmwan=device
	uci -q set network.ptmwan.type=untagged
	uci -q set network.ptmwan.ifname="$PTMDEV"
	uci -q set network.ptmwan.name="$WANIFACE"
}

populate_eth_device() {
	[ "$hasEthWan" == "0" ] && return

	ETHDEV="$(db -q get hw.board.ethernetWanPort)"

	WANIFACE="$ETHDEV.1"

	device_config_exists "$WANIFACE" && return

	uci -q set network.ethwan=device
	uci -q set network.ethwan.type=untagged
	uci -q set network.ethwan.ifname="$ETHDEV"
	uci -q set network.ethwan.name="$WANIFACE"
}

populate_network_config_ifnames() {
	# LAN ports
	uci -q get network.lan.ifname >/dev/null || uci -q set network.lan.ifname="$LANPORTS"

	[ $((hasEthWan+hasAdsl+hasVdsl)) -eq 0 ] && {
		uci -q commit network
		return
	}

	WANTYPE="$(uci -q get network.wan.type)"
	[ "$WANTYPE" == "anywan" ] && {
		uci -q delete network.wan.type
		uci -q set network.wan.ifname="$WANIFACE"
	}

	uci -q get network.wan.ifname >/dev/null || uci -q set network.wan.ifname="$WANIFACE"

	uci -q commit network
}

populate_dsl_settings
populate_atm_device
populate_ptm_device
populate_eth_device
populate_network_config_ifnames