config controller 'controller'
	option enabled '1'
	option registrar '5 2'	    #bands on which wps registrar supported
	option debug '6'
	option enable_sta_steer '0'
	option enable_bsta_steer '0'
	option primary_vid '1'
	option primary_pcp '0'

config interface 'lan'
	option 'dhcp'

config ap
	option band '5'
	option encryption 'sae-mixed'
	option key '1234567890'
	option ssid 'map-net5'
	option vid '1'
	option type 'fronthaul'
	option network 'lan'

config ap
	option band '2'
	option encryption 'sae-mixed'
	option key '1234567890'
	option ssid 'map-net2'
	option vid '1'
	option type 'fronthaul'
	option network 'lan'

config ap
	option band '5'
	option encryption 'sae'
	option key '5555555555'
	option ssid 'map-bkhaul-5'
	option type 'backhaul'
	option disallow_bsta '1'		# bitmap, 1 for disallow p1, 2 to disallow p2, 3 to disallow both (probably never applicable)
	option vid '1'
	option network 'lan'

config ap
	option band '2'
	option encryption 'sae'
	option key '2222222222'
	option ssid 'map-bkhaul-2'
	list disallow_bsta '0'                # 0 or 1 profile-1 bSTA
	option vid '1'
	option type 'backhaul'
	option network 'lan'

config policy 'policy'
	list steer_exclude '00:11:22:33:44:55'
	list steer_exclude_btm '00:aa:bb:cc:dd:ee'
	option steer_policy '2'                    # 0, 1, 2 - see MultiAP spec
	option util_threshold '200'                # channel-util as in BSS load
	option rcpi_threshold '30'                 # 0 - 220 valid range
	option report_scan '0'                     # 0 or 1 for independent scans
	option report_sta_assocfails '1'           # 0 or 1 - stas assoc failure
	option report_sta_assocfails_rate '2'      # reporting rate for STA assoc fails (attempts per minute)
	option report_metric_periodic '0'          # 0, or 1 - 255 in secs
	option report_rcpi_threshold '0'           # 0, or 1 - 220
	option report_util_threshold '0'           # 0, or  channel-util value
	option rcpi_hysteresis_margin '0'          # 0, or > 0 - hysteresis margin
	option include_sta_stats '0'               # sta stats in AP metric resp
	option include_sta_metric '0'              # sta metric in AP metric resp
	option disallow_bsta_p1 '0'                # 0 or 1 profile-1 bSTA
	option disallow_bsta_p2 '0'                # 0 or 1 profile-2 bSTA