#!/bin/sh /etc/rc.common

. /lib/functions.sh
include /lib/network

START=20
USE_PROCD=1

DEVICE_ADDED=0

device_config_exists() {
	ubus call uci get '{"config":"network","type":"device"}' | grep -w name | grep -qw "$1" && return 0
	return 1
}

configure_ethernet_iface() {
	local name baseifname ifname

	config_get name $1 name
	config_get baseifname $1 baseifname
	config_get ifname $1 ifname

	[ -n "$ifname" -a -n "$name" ] || return
	device_config_exists "$ifname" && return

	uci -q set network.$name=device
	uci -q set network.$name.type=untagged
	uci -q set network.$name.ifname="$baseifname"
	uci -q set network.$name.name="$ifname"

	DEVICE_ADDED=1
}

configure_vlan_iface() {
	local name baseifname ifname
	local vlan8021p vlan8021q

	config_get name $1 name
	config_get baseifname $1 baseifname
	config_get ifname $1 ifname
	config_get vlan8021p $1 vlan8021p
	config_get vlan8021q $1 vlan8021q

	[ -n "$ifname" -a -n "$name" ] || return
	device_config_exists "$ifname" && return

	uci -q set network.$name=device
	uci -q set network.$name.type=8021q
	uci -q set network.$name.priority=$vlan8021p
	uci -q set network.$name.vid="$vlan8021q"
	uci -q set network.$name.ifname="$baseifname"
	uci -q set network.$name.name="$ifname"
	uci -q commit network

	DEVICE_ADDED=1
}

start_service() {
	config_load layer2_interface_ethernet
	config_foreach configure_ethernet_iface ethernet_interface

	config_load layer2_interface_vlan
	config_foreach configure_vlan_iface vlan_interface

	[ $DEVICE_ADDED -eq 1 ] && ubus call network reload
}

boot() {
	local baseifname port unit uplinkport

	config_load layer2_interface_ethernet
	config_get baseifname Wan baseifname

	[ -n "$baseifname" ] || baseifname="$(db -q get hw.board.ethernetWanPort)"

	uplinkport=$(uci show ports | grep "uplink='1'" | cut -d'.' -f2)

	if [ -n "$uplinkport" ]; then
		baseifname="$(uci -q get ports.$uplinkport.ifname)"
	else
		uplinkport=$(uci show ports | grep "ifname='$baseifname'" | cut -d'.' -f2)
		[ -n "$uplinkport" ] && uci -q set ports.$uplinkport.uplink=1 && uci commit ports
	fi

#	if [ "$(db get hw.board.hardware)" != "EG300" ]; then
#		if [ "$(get_port_speed $baseifname)" != "1000FD" ]; then
#			ethctl $baseifname phy-power down
#			ethctl $baseifname phy-power up
#		fi
#	fi

	for interf in $(db get hw.board.ethernetPortOrder); do
		ethswctl -c wan -i $interf -o disable
	done

	unit=$(echo $(get_port_number $baseifname) | cut -d ' ' -f 1)
	port=$(echo $(get_port_number $baseifname) | cut -d ' ' -f 2)

	ethswctl -c pause -n $unit -p $port -v 1

	ethswctl -c hw-switching -o enable

	if [ -n "$baseifname" ]; then
		ethswctl -c wan -i $baseifname -o enable
	fi

	if [ "$(db get hw.board.tm)" == "1" ]; then
		for interf in $(db get hw.board.ethernetPortOrder); do
			tmctl porttminit --devtype ETH --if $interf --flag 1 || echo "ERROR: porttminit $interf failed!" > /dev/kmsg
		done
	fi

	start
}

service_triggers() {
	procd_add_reload_trigger layer2_interface_ethernet layer2_interface_vlan
}