-------------------------------------------------------------------------------
* c1598f9 added support for Linux LED
-------------------------------------------------------------------------------
commit c1598f9dc8f2d67fbfcfd831052f40b3cde3d19c
Author: Oussama Ghorbel <oussama.ghorbel@iopsys.eu>
Date: 2019-04-12 14:11:06 +0200
added support for Linux LED
Base directory -> /
src/gpio_led.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 74 insertions(+), 1 deletion(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* 5eaa810 Prevent adding the same button twice.
* d9307f7 if config read from /lib/db/config/hw then do not allow any changes.
* a930a09 Read button config from two places.
-------------------------------------------------------------------------------
commit 5eaa810747ec7c130df2a2e6ac3a1df664c8f06b
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-09-26 19:02:20 +0200
Prevent adding the same button twice.
Base directory -> /
src/button.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
-------------------------------------------------------------------------------
commit d9307f796d8b30170fdff7451c4efc35ed3cd428
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-09-26 18:54:53 +0200
if config read from /lib/db/config/hw then do not allow any changes.
Base directory -> /
src/button.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
-------------------------------------------------------------------------------
commit a930a095a0f2f4a338de846fd5a01de609588365
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-09-26 18:40:05 +0200
Read button config from two places.
First read /lib/db/config/hw then /etc/config/button
Base directory -> /
src/button.c | 317 ++++++++++++++++++++++++++++++++++-------------------------
1 file changed, 182 insertions(+), 135 deletions(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* a9e0b8e wlctl needs to have the interface as argument.
-------------------------------------------------------------------------------
commit a9e0b8ea80511ef16ef71c59412bcd9b90beb7fe
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-06-09 16:54:25 +0200
wlctl needs to have the interface as argument.
On systems with multiple wifi chips we need to specify what chip the led is
connected to.
Also fix an issue with address could only be 0-9 and we need 0-31.
Base directory -> /
src/wlctl_led.c | 26 +++++++++++++++++++-------
1 file changed, 19 insertions(+), 7 deletions(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* ff2cf8b Remove gpio_test program as it does not compile with musl
-------------------------------------------------------------------------------
commit ff2cf8bfbd3a04731088e9f4540796696e961382
Author: Jonas Höglund <jonas.hoglund@embeddednation.com>
Date: 2017-04-05 10:16:15 +0200
Remove gpio_test program as it does not compile with musl
Base directory -> /
Makefile.am | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* a6eaaae Implement support function for led driver.
-------------------------------------------------------------------------------
commit a6eaaae28519e1b77cd6e7a95c28bf9b113afecb
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-03-16 16:43:47 +0100
Implement support function for led driver.
Need this to avoid led module to set leds to unsupported state.
Base directory -> /
src/gpio_led.c | 16 ++++++++++++++++
src/touch_sx9512.c | 16 ++++++++++++++++
2 files changed, 32 insertions(+)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* c3c2a59 change catv montor to run 10 times slower when no module is detected.
* 9700e9d Add delay for gpio.
-------------------------------------------------------------------------------
commit c3c2a591ad74ae0bdc255e8255045879502b2522
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-03-07 15:58:57 +0100
change catv montor to run 10 times slower when no module is detected.
Base directory -> /
src/catv_monitor.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
-------------------------------------------------------------------------------
commit 9700e9d11a146344b80e17dcd093474a15f8262a
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-03-07 15:47:06 +0100
Add delay for gpio.
This delay is how long to wait in microseconds after a gpio value is set.
Used to work around HW issue with setting bits where the hardware uses a
read modify write on a pin with a large capacitor.
Base directory -> /
src/gpio.c | 8 ++++----
src/gpio.h | 2 +-
src/gpio_led.c | 15 ++++++++++++---
src/gpio_shift_register.c | 16 ++++++++--------
src/gpio_test.c | 2 +-
5 files changed, 26 insertions(+), 17 deletions(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* 8ff193b When sending a ubus button event, include info about short or long press (like is beeing done for /sbin/hotplug-call). refs #9873
-------------------------------------------------------------------------------
commit 8ff193b389aa5d960225166b92cc60b32721504f
Author: Ronny Nilsson <ronny.nilsson@inteno.se>
Date: 2016-08-29 15:23:12 +0200
When sending a ubus button event, include info about short or long press
(like is beeing done for /sbin/hotplug-call). refs #9873
Base directory -> /
src/button.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* 4a64f96 Workaround for ghost gpio press directly after start
-------------------------------------------------------------------------------
commit 4a64f969af4ee38507e83ed113e4e6a6fa9b9cf1
Author: Benjamin Larsson <benjamin@southpole.se>
Date: 2016-08-17 11:41:09 +0200
Workaround for ghost gpio press directly after start
On platforms with gpio buttons we have seen that sometimes buttons get
pressed directly after start and thus disabling the wifi. This change
implements a dummy read to flush out the bad states. Also implemented is a
check if a button is pressed directly 4 seconds after start. If that is the
case the press is logged to the syslog and then ignored.
Base directory -> /
src/button.c | 13 ++++++++++++-
src/gpio_button.c | 12 ++++++++++--
src/peripheral_manager.c | 2 ++
src/server.c | 6 ++++++
src/server.h | 3 +++
5 files changed, 33 insertions(+), 3 deletions(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* dfcf187 Do not try to set flash state to led panel leds.
-------------------------------------------------------------------------------
commit dfcf187cf3961841dee750371d3999d23297b74c
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2016-07-11 17:04:50 +0200
Do not try to set flash state to led panel leds.
Ask driver if it supports hardware flash if not do not set it. This to avoid
a printout from the actual driver that complain it can't set this state.
refs #9720
Base directory -> /
src/led.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
* 7199297 Detect if touch panel is covered.
* 866b2c6 remove some whitespace.
* 77184fe Filter all button on proximity.
-------------------------------------------------------------------------------
commit 7199297d1c051782cf0d140253b325a3fa8d7eae
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2016-05-23 14:33:24 +0200
Detect if touch panel is covered.
If we have proximity event for more than 30 seconds assume that something
covers the panel or box is put upside down.
Base directory -> /
src/button.c | 6 ++++-
src/touch_sx9512.c | 77 ++++++++++++++++++++++++++++++++++++++++++++----------
2 files changed, 68 insertions(+), 15 deletions(-)
-------------------------------------------------------------------------------
commit 866b2c6deb38439496e2d60265533d4d314c9a69
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2016-05-23 11:26:32 +0200
remove some whitespace.
Base directory -> /
src/touch_sx9512.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
-------------------------------------------------------------------------------
commit 77184fe0b43c82564a49dd03a9b0e048a3fb6861
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2016-05-20 18:54:32 +0200
Filter all button on proximity.
Only report button presses if we also have a proximity near state active.
This is to make it a little harder to get ghost presses.
Base directory -> /
src/led.c | 2 +-
src/touch_sx9512.c | 77 ++++++++++++++++++++++++++++++++++++------------------
2 files changed, 52 insertions(+), 27 deletions(-)
-------------------------------------------------------------------------------
