diff --git a/peripheral_manager/src/configs/DG301R0 b/peripheral_manager/src/configs/DG301R0
deleted file mode 100644
index bc419cb79..000000000
--- a/peripheral_manager/src/configs/DG301R0
+++ /dev/null
@@ -1,307 +0,0 @@
-
-config board 'board'
-	option hardware 'DG301'
-	option hasAdsl '1'
-	option hasVdsl '1'
-	option hasVoice '1'
-	option hasDect '1'
-	option VoicePorts '2'
-	option VoiceLeds '1'
-	option hasWifi '1'
-	option ethernetPorts '5'
-	option ethernetPortNames 'LAN1 LAN2 LAN3 LAN4 WAN'
-	option ethernetPortOrder 'eth4 eth3 eth1 eth2 eth0'
-	option ethernetLanPorts 'eth1 eth2 eth3 eth4'
-	option ethernetWanPort 'eth0'
-	option adslWanPort 'atm0'
-	option vdslWanPort 'ptm0'
-	option wpsButtonGpio '22'
-	option fxsRelayGpio '8'
-	option hasBrcmAvs '0'
-
-config wifi-chip '435f'
-	option bands 'b'
-
-config wifi-chip '43a0'
-	option bands 'a'
-	option is_ac '1'
-
-config wifi-chip '43a2'
-	option bands 'a'
-	option is_ac '1'
-
-config wifi-chip '43bc'
-        option bands 'a'
-        option is_ac '1'
-	option radarthrs '0x6aa 0x30 0x6a8 0x30 0x69c 0x30 0x6aa 0x30 0x6aa 0x30 0x6a2 0x30'
-
-###############################################################################
-#
-#		Button config, start
-# 
-
-############### gpio buttons, driver config
-config gpio_button gpio_buttons
-       list buttons gpio_reset
-       list buttons gpio_dect
-       list buttons gpio_wps
-       list buttons gpio_info
-       list buttons gpio_eco
-
-config gpio_button gpio_reset
-       option addr 32
-       option active low
-
-config gpio_button gpio_dect
-       option addr 20
-       option active low
-
-config gpio_button gpio_wps
-       option addr 22
-       option active low
-
-config gpio_button gpio_info
-       option addr 37
-       option active low
-
-config gpio_button gpio_eco
-       option addr 36
-       option active low
-
-############### function buttons used on board.
-config button_map button_map	
-	list buttonnames RESET
-	list buttonnames DECT
-	list buttonnames WPS
-	list buttonnames INFO
-	list buttonnames ECO
-	option minpress 100
-
-############### mapping function button to driver button
-config button_map RESET
-       list button gpio_reset
-       option minpress 5000
-       option hotplug resetbutton
-
-config button_map DECT
-       list button gpio_dect
-       option hotplug dectbutton
-
-config button_map WPS
-       list button gpio_wps
-       option hotplug wpsbutton
-
-config button_map INFO
-       list button gpio_info
-       option hotplug infobutton
-
-config button_map ECO
-       list button gpio_eco
-       option hotplug ecobutton
-
-#
-#		Button config , end
-# 
-###############################################################################
-
-###############################################################################
-#
-#		Led config, start
-# 
-
-############### gpio led, driver config
-config gpio_led gpio_leds
-        list leds Ethernet_green
-        list leds Wireless_green
-	list leds Voice_green
-	list leds Broadband_green
-	list leds Status_blue
-	list leds Status_green
-	list leds Status_red
-	list leds Internet_green
-	list leds Internet_red
-	list leds DECT_red
-	list leds DECT_green
-	list leds TV_green
-	list leds WPS_green
-	list leds WPS_red
-	list leds WAN_yellow
-
-config gpio_led Ethernet_green
-       option addr     0
-       option active   hi
-       option mode     csr
-
-config gpio_led Wireless_green
-       option addr     3
-       option active   hi
-       option mode     csr
-
-config gpio_led Voice_green
-       option addr     9
-       option active   low
-       option mode     direct
-
-config gpio_led Broadband_green
-       option addr     6
-       option active   hi
-       option mode     csr
-
-config gpio_led Status_blue
-       option addr     7
-       option active   hi
-       option mode     csr
-
-config gpio_led Status_green
-       option addr     39
-       option active   low
-       option mode     direct
-
-config gpio_led Status_red
-       option addr     38
-       option active   low
-       option mode     direct
-
-config gpio_led Internet_green
-       option addr     5
-       option active   hi
-       option mode     csr
-
-config gpio_led Internet_red
-       option addr     4
-       option active   hi
-       option mode     csr
-
-config gpio_led DECT_red
-       option addr     19
-       option active   low
-       option mode     direct
-
-config gpio_led DECT_green
-       option addr     15
-       option active   low
-       option mode     direct
-
-config gpio_led TV_green
-       option addr     35
-       option active   low
-       option mode     direct
-
-config gpio_led WPS_green
-       option addr     2
-       option active   hi
-       option mode     csr
-
-config gpio_led WPS_red
-       option addr     1
-       option active   hi
-       option mode     csr
-
-config gpio_led WAN_yellow
-       option addr     21
-       option active   hi
-       option mode     direct
-
-############### mapping led function to driver led
-
-config led_map led_dsl
-       list led_action_ok     Broadband_green=ON
-       list led_action_off    Broadband_green=OFF
-       list led_action_notice Broadband_green=FLASH_SLOW
-       list led_action_alert  Broadband_green=FLASH_SLOW
-       list led_action_error  Broadband_green=FLASH_FAST
-
-config led_map led_wifi
-       list led_action_ok     Wireless_green=ON
-       list led_action_off    Wireless_green=OFF
-       list led_action_notice Wireless_green=FLASH_SLOW
-       list led_action_alert  Wireless_green=FLASH_SLOW
-       list led_action_error  Wireless_green=FLASH_FAST
-
-config led_map led_wps
-       list led_action_ok     'WPS_green = ON'
-       list led_action_ok     'WPS_red   = OFF'
-       list led_action_off    'WPS_green = OFF'
-       list led_action_off    'WPS_red   = OFF'
-       list led_action_notice 'WPS_green = FLASH_SLOW'
-       list led_action_notice 'WPS_red   = OFF'
-       list led_action_alert  'WPS_green = OFF'
-       list led_action_alert  'WPS_red   = FLASH_SLOW'
-       list led_action_error  'WPS_green = OFF'
-       list led_action_error  'WPS_red   = FLASH_FAST'
-
-config led_map led_lan
-       list led_action_ok     Ethernet_green=ON
-       list led_action_off    Ethernet_green=OFF
-       list led_action_notice Ethernet_green=FLASH_SLOW
-       list led_action_alert  Ethernet_green=FLASH_SLOW
-       list led_action_error  Ethernet_green=FLASH_FAST
-
-config led_map led_status
-       list led_action_ok     'Status_green = ON'	
-       list led_action_ok     'Status_red   = OFF'
-       list led_action_ok     'Status_blue  = OFF'
-
-       list led_action_off    'Status_green = OFF'	
-       list led_action_off    'Status_red   = OFF'
-       list led_action_off    'Status_blue  = OFF'
-
-       list led_action_notice 'Status_green = FLASH_SLOW'
-       list led_action_notice 'Status_red   = OFF'
-       list led_action_notice 'Status_blue  = OFF'
-
-       list led_action_alert  'Status_green = OFF'	
-       list led_action_alert  'Status_red   = FLASH_SLOW'
-       list led_action_alert  'Status_blue  = OFF'
-
-       list led_action_error  'Status_green = OFF'
-       list led_action_error  'Status_red   = FLASH_FAST'
-       list led_action_error  'Status_blue  = OFF'
-
-config led_map led_tv
-       list led_action_ok     TV_green=ON
-       list led_action_off    TV_green=OFF
-       list led_action_notice TV_green=FLASH_SLOW
-       list led_action_alert  TV_green=FLASH_SLOW
-       list led_action_error  TV_green=FLASH_FAST
-
-config led_map led_wan
-       list led_action_off    WAN_yellow=OFF
-       list led_action_alert  WAN_yellow=ON
-
-config led_map led_internet
-       list led_action_ok     'Internet_green = ON' 
-       list led_action_ok     'Internet_red   = OFF'
-
-       list led_action_off    'Internet_green = OFF' 
-       list led_action_off    'Internet_red   = OFF'
-
-       list led_action_notice 'Internet_green = FLASH_SLOW'
-       list led_action_notice 'Internet_red   = OFF'
-
-       list led_action_alert  'Internet_green = OFF'
-       list led_action_alert  'Internet_red   = FLASH_SLOW'
-
-       list led_action_error  'Internet_green = OFF' 
-       list led_action_error  'Internet_red   = ON'
-
-config led_map led_voice1
-       list led_action_ok     Voice_green=ON
-       list led_action_off    Voice_green=OFF
-       list led_action_notice Voice_green=FLASH_SLOW
-       list led_action_alert  Voice_green=FLASH_SLOW
-       list led_action_error  Voice_green=FLASH_FAST
-
-config led_map led_eco
-       list led_action_ok     Status_blue=ON
-       list led_action_off    Status_blue=OFF
-       list led_action_notice Status_blue=FLASH_SLOW
-       list led_action_alert  Status_blue=FLASH_SLOW
-       list led_action_error  Status_blue=FLASH_FAST
-
-#
-#		Led config , end
-# 
-###############################################################################
-
-
diff --git a/peripheral_manager/src/ledctl b/peripheral_manager/src/ledctl
deleted file mode 100755
index 2e763b390..000000000
--- a/peripheral_manager/src/ledctl
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-name=$1
-status=$2
-
-
-name=$(echo $name | tr '[A-Z]' '[a-z]')
-status=$(echo $status | tr '[A-Z]' '[a-z]')
-
-case $name in
-	normal) ubus call leds set  '{"state":"normal"}' ;;
-	proximity) ubus call leds set  '{"state":"proximity"}' ;;
-	test) ubus call leds set  '{"state":"test"}' ;;
-	allon) ubus call leds set  '{"state":"allon"}' ;;
-	alloff) ubus call leds set  '{"state":"alloff"}' ;;
-	production) ubus call leds set  '{"state":"production"}' ;;
-	broadband) db get hw.board.lednames | grep -iq broadband && name="dsl" || exit ;;
-	ethernet) name="lan" ;;
-	wireless) name="wifi" ;;
-	tel*|voice) name="voice1" ;;
-	video) name="tv" ;;
-	power) name="status" ;;
-esac
-
-case $status in
-	on) status="ok" ;;
-	fail) status="error" ;;
-	blink) status="notice" ;;
-esac
-
-ubus -s /tmp/ubus.s call led.$name set '{"state":"'$status'"}' &
-
diff --git a/peripheral_manager/src/src/sfp.c b/peripheral_manager/src/src/sfp.c
index 09adca4c2..7848000e8 100644
--- a/peripheral_manager/src/src/sfp.c
+++ b/peripheral_manager/src/src/sfp.c
@@ -930,7 +930,7 @@ static int sfp_ddm_get_current_method(struct ubus_context *ubus_ctx, struct ubus
 static int sfp_ddm_get_tx_pwr(struct blob_buf *b, int raw)
 {
         float x;
-        char buf[10];
+        char buf[16];
         if (!ddm_prepare())
                 return 0;
 
@@ -944,7 +944,9 @@ static int sfp_ddm_get_tx_pwr(struct blob_buf *b, int raw)
         }
         snprintf(buf, sizeof(buf), "%.4f mW", x * (1.0/10000));
         blobmsg_add_string(b, "tx-pwr", buf);
-
+        snprintf(buf, sizeof(buf), "%.4f dBm", 
+                10.0f * log10f(x * 1e-7) + 30.0f);
+        blobmsg_add_string(b, "tx-pwr-dBm", buf);
         return 1;
 }
 
@@ -965,7 +967,7 @@ static int sfp_ddm_get_rx_pwr(struct blob_buf *b, int raw)
 {
         unsigned i;
         float x;
-        char buf[10];
+        char buf[16];
 
         if (!ddm_prepare())
                 return 0;
@@ -988,6 +990,9 @@ static int sfp_ddm_get_rx_pwr(struct blob_buf *b, int raw)
 
         snprintf(buf, sizeof(buf), "%.4f mW", x * (1.0/10000));
         blobmsg_add_string(b, "rx-pwr", buf);
+        snprintf(buf, sizeof(buf), "%.4f dBm",
+                10.0 * log10(x * 1e-7) + 30.0);
+        blobmsg_add_string(b, "rx-pwr-dBm", buf);
         blobmsg_add_string(b, "rx-pwr-type",
                            (sfp_ddm.type & 8) ? "average" : "OMA");
         return 1;
diff --git a/peripheral_manager/src/src/vox.c b/peripheral_manager/src/src/vox.c
index 2045f0606..9ac6daa5a 100644
--- a/peripheral_manager/src/src/vox.c
+++ b/peripheral_manager/src/src/vox.c
@@ -121,7 +121,9 @@ void vox_init(struct server_ctx *s_ctx) {
 
 	/* if config entries for vox leds exist register the spi as used. */
 	if(register_spi) {
-		board_ioctl(BOARD_IOCTL_SPI_INIT, SPI_SLAVE_SELECT, 0, 0, 0, 391000);
+		/* arg 4 is the spi mode encoded in a string pointer */
+		/* mode is decribed i/bcm963xx/shared/opensource/include/bcm963xx/bcmSpiRes.h */
+		board_ioctl(BOARD_IOCTL_SPI_INIT, SPI_SLAVE_SELECT, 0, (char*)0, 0, 391000);
 		gpio_open_ioctl();
 	}
 }
diff --git a/peripheral_manager/src/src/vox_test.c b/peripheral_manager/src/src/vox_test.c
index 9a59c7343..540ddc23c 100644
--- a/peripheral_manager/src/src/vox_test.c
+++ b/peripheral_manager/src/src/vox_test.c
@@ -76,7 +76,9 @@ int pos;
 void display(void){
 
         printf("\r");
-        printf("%02x %02x %02x %02x \r",
+        printf("%02x %02x %02x %02x %02x %02x \r",
+               spi_data[0],
+               spi_data[1],
                spi_data[2],
                spi_data[3],
                spi_data[4],
@@ -93,7 +95,7 @@ void display(void){
 
 void inc(void){
 
-        int byte = 2 + pos/2;
+        int byte = pos/2;
         int nibble = pos%2;
 
         int val_hi = (spi_data[byte] >> 4 ) & 0xF;
@@ -113,7 +115,7 @@ void inc(void){
 }
 
 void dec(void){
-        int byte = 2 + pos/2;
+        int byte = pos/2;
         int nibble = pos%2;
 
         int val_hi = (spi_data[byte] >> 4 ) & 0xF;
@@ -137,7 +139,9 @@ int main(int argc, char *argv[])
         int ch;
 
         gpio_open_ioctl();
-        board_ioctl(BOARD_IOCTL_SPI_INIT, SPI_SLAVE_SELECT, 0, 0, 0, 391000);
+        /* arg 4 is the spi mode encoded in a string pointer */
+        /* mode is decribed i/bcm963xx/shared/opensource/include/bcm963xx/bcmSpiRes.h */
+        board_ioctl(BOARD_IOCTL_SPI_INIT, SPI_SLAVE_SELECT, 0, (char *)0, 0, 391000);
         set_conio_terminal_mode();
         fflush(stdout);
 
@@ -147,8 +151,8 @@ int main(int argc, char *argv[])
                 /* right */
                 if (ch == 4414235) {
                         pos++;
-                        if (pos > 7)
-                                pos = 7;
+                        if (pos > 11)
+                                pos = 11;
                 }
                 /* left */
                 if (ch == 4479771) {