Change line/channel names from tapi/1 and tapi/2 to tapi/0 and tapi1

Unsupported lines/channes like TAPI/[2-6], BRCM/6 are also removed.

This change has the following benefits.
- To simplify the line/channel name handling in /etc/init.d/voice_client
- To have the consistent implementation both on Intel and on Broadcom platforms

(cherry picked from commit 40c426ca09)

voice-client/files/etc/init.d/voice_client

@@ -153,7 +153,6 @@ assemble_and_copy_config()
 	[ -f $TMPL_ASTERISK ]		&& cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
 	[ -f $TMPL_CDR ]		&& cp $TMPL_CDR			$WORKDIR/cdr.conf
 	[ -f $TMPL_CEL ]		&& cp $TMPL_CEL			$WORKDIR/cel.conf
-	[ -f $TMPL_INDICATIONS ]	&& cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
 	[ -f $TMPL_MANAGER ]		&& cp $TMPL_MANAGER		$WORKDIR/manager.conf
 	[ -f $TMPL_MODULES ]		&& cp $TMPL_MODULES		$WORKDIR/modules.conf
 	[ -f $TMPL_EXTENSIONS_MACRO ]	&& cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
@@ -165,6 +164,14 @@ assemble_and_copy_config()
 	[ -f $TMPL_UDPTL ]	        && cp $TMPL_UDPTL	        $WORKDIR/udptl.conf
 	[ -f $SPECRATECFG ]		&& cp $SPECRATECFG		$WORKDIR/special_rate_nr.cfg
 	
+	[ -f $TMPL_INDICATIONS ]	&&  {
+		cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
+
+		config_get country TEL country
+		country_code=$(supportedCountries |grep $country |cut -d':' -f3 |tr [A-Z] [a-z])
+		sed -i "s/^country=.*/country=${country_code}/g" $WORKDIR/indications.conf
+	}
+
 	test -e $TMPL_MEETME && cp $TMPL_MEETME $WORKDIR/meetme.conf
 	
 	# Handle extensions_extra, carry over old file to new config if there is one
@@ -256,9 +263,7 @@ read_codecs_ptime()
 #
 read_lines()
 {
-	local line call_lines lineid ldx lines llength clength
-	local loffset=$(ubus -t 1 call voice.asterisk platform | jsonfilter -e @.lineoffset)
-	loffset=${loffset:-0}
+	local line call_lines lines clength
 
 	config_get call_lines $1 call_lines
 
@@ -267,28 +272,17 @@ read_lines()
 		# convert line format to <LINENAME><LINEID>
 		case $line in
 			[0-9])
-				line="$LINENAME$line"
 			;;
 			"$CHANNELNAME"/[0-9])
+				# get the index from channel name
 				clength=$(echo $CHANNELNAME | wc -c)
-				line="$LINENAME${line:$clength}"
+				line="${line:$clength}"
 			;;
 		esac
 
-		# get the index from line name
-		# llength=$(echo $LINENAME | wc -c)
-		# lineid="${lineid:$llength}"
+		[ -n "$line" ] || continue
 
-		# get the index from uci config order
-		lineid="$(uci show voice_client | grep =tel_line | grep -wn $line | cut -d ':' -f1)"
-
-		[ -n "$lineid" ] || continue
-
-		# -1 to match the line's uci config index number
-		# +loffset to match the correct number in channel driver
-		ldx=$((lineid-1+loffset))
-
-		lines="$lines$CHANNELNAME/$ldx&"
+		lines="$lines$CHANNELNAME/$line&"
 	done
 
 	lines=$(escape_sed_substitution $lines)
@@ -1795,6 +1789,7 @@ configure_tel()
 	local fac
 	local echocancel
 	local hold_target_before_refer
+	local calleridtype
 
 	config_get jbenable TEL jbenable
 	config_get jbforce TEL jbforce
@@ -1805,6 +1800,7 @@ configure_tel()
 	config_get fac TEL fac
 	config_get echocancel TEL echo_cancel
 	config_get hold_target_before_refer TEL hold_target_before_refer
+	config_get calleridtype TEL calleridtype
 
 	CHANNEL_FAC="$CHANNEL_FAC $fac"
 	# Convert whitespace to commas
@@ -1823,6 +1819,12 @@ configure_tel()
 	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$LINENAME.tmp
 	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$LINENAME.tmp
 
+	if [ -n "${calleridtype}" ] ; then
+		sed -i "s/^calleridtype *=.*/calleridtype = ${calleridtype}/g" $WORKDIR/$LINENAME.tmp
+	else
+		sed -i "/^calleridtype *=.*/d" $WORKDIR/$LINENAME.tmp
+	fi
+
 	if [ "$dtmfmode" == "compatibility" ] ; then
 		dtmfcompatibility="1"
 	else
@@ -2243,6 +2245,7 @@ reload_service() {
 	# FXS channel module must be reloaded before sip module. Otherwise some attributes like
 	# line's registration state which is updated by SIP module through callback might be
 	# reset.
+	asterisk -rx "config reload $ASTERISKDIR/indications.conf"
 	asterisk -rx "$(getChipVendor) reload"
 	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
 	sleep 1

voice-client/files/lib/voice/broadcom.sh

@@ -22,7 +22,7 @@ getBaseMAC() {
 }
 
 getAllLines() {
-    echo "BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5&BRCM/6"
+    echo "BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5"
 }
 
 getLineIdx() {

voice-client/files/lib/voice/intel.sh

@@ -28,12 +28,11 @@ getBaseMAC() {
 }
 
 getAllLines() {
-    echo "TAPI/1&TAPI/2&TAPI/3&TAPI/4&TAPI/5&TAPI/6"
+    echo "TAPI/0&TAPI/1"
 }
 
 getLineIdx() {
-    i=$1
-    echo $((i+1))
+    echo $1
 }
 
 getEchoCancellingValue() {
@@ -52,5 +51,14 @@ getEchoCancellingValue() {
 }
 
 supportedCountries() {
-	echo "ETSI:ETS"
+	echo "Austria:AUT:AT"
+	echo "Denmark:DNK:DK"
+	echo "Estonia:EST:EE"
+	echo "Germany:DEU:DE"
+	echo "Netherlands:NLD:NL"
+	echo "Norway:NOR:NO"
+	echo "Spain:ESP:ES"
+	echo "Sweden:SWE:SE"
+	echo "Switzerland:CHE:CH"
+	echo "United Kingdom:GBR:UK"
 }

voice-client/files/usr/libexec/rpcd/voice.asterisk

@@ -137,8 +137,8 @@ case "$1" in
 					    json_add_int chanoffset 0
 				    ;;
 				    "tapi")
-					    json_add_int lineoffset 1
-					    json_add_int chanoffset -1
+					    json_add_int lineoffset 0
+					    json_add_int chanoffset 0
 				    ;;
 			        *)
 				    # Error, unknown platform