CWMP Agent

icwmp is a client implementation of TR-069/CWMP protocol.

It is written in C programming language and depends on a number of libraries of OpenWrt for building and running.

Good to Know

The icwmp client is :

• Tested with several ACS such as Axiros, AVSytem, GenieACS, OpenACS, etc...
• Supports all required TR069 RPCs.
• Supports all DataModel of TR family such as TR-181, TR-104, TR-143, TR-157, etc...
• Supports all types of connection requests such as HTTP, XMPP, STUN.
• Supports integrated file transfer such as HTTP, HTTPS, FTP.

Configuration File

The icwmp UCI configuration is located in '/etc/config/cwmp', and contains 3 sections: 'acs', 'cpe' and 'lwn'.

config acs 'acs'
	option userid 'iopsys'
	option dhcp_discovery 'enable'
	option compression 'Disabled'
	option retry_min_wait_interval '5'
	option retry_interval_multiplier '2000'

config cpe 'cpe'
	option interface 'eth0.1'
	option default_wan_interface 'wan'
	option userid 'iopsys'
	option exec_download '0'
	
config lwn 'lwn'
	option enable '1'
	option hostname ''
	option port ''

Complete UCI for cwmp configuration available in link or raw schema

RPCs Method supported

The following tables provides a summary of all methods, and indicates the conditions under which implementation of each RPC method defined in Annex A is REQUIRED or OPTIONAL.

Methods for CPE responding

Method name	CPE requirement	Supported
GetRPCMethods	REQUIRED	Yes
SetParameterValues	REQUIRED	Yes
GetParameterValues	REQUIRED	Yes
GetParameterNames	REQUIRED	Yes
SetParameterAttributes	REQUIRED	Yes
GetParameterAttributes	REQUIRED	Yes
AddObject	REQUIRED	Yes
DeleteObject	REQUIRED	Yes
Reboot	REQUIRED	Yes
Download	REQUIRED	Yes
ScheduleDownload	OPTIONAL	Yes
Upload	OPTIONAL	Yes
FactoryReset	OPTIONAL	Yes
GetQueuedTransfers	OPTIONAL	No
GetAllQueuedTransfers	OPTIONAL	No
CancelTransfer	OPTIONAL	Yes
ScheduleInform	OPTIONAL	Yes
ChangeDUState	OPTIONAL	Yes
SetVouchers	OPTIONAL	No
GetOptions	OPTIONAL	No

Methods for CPE calling

Method name	CPE requirement	Supported
GetRPCMethods	OPTIONAL	Yes
Inform	REQUIRED	Yes
TransferComplete	REQUIRED	Yes
AutonomousTransferComplete	OPTIONAL	No
DUStateChangeComplete	OPTIONAL	Yes
AutonomousDUStateChangeComplete	OPTIONAL	No
RequestDownload	OPTIONAL	No
Kicked	OPTIONAL	No

Concepts and Workflow

As indicated in the TR069 standard, the icwmpd starts automatically when the system is started. Then it reads the initial configuration from UCI and if configured connects to the ACS. ACS configuration in icwmp can be done manually by the admin using UCI or by operator using DHCP Option 43, and later it could start other sessions due to event causes.

Session workflow could be checked with sniffer packets tool such as Wireshark or tcpdump. In addition icwmpd has a log file '/var/log/icwmpd.log', that describes the workflow. E.g. below you can find an abstract of a log file content:

24-12-2019, 10:21:18 [INFO]    STARTING ICWMP with PID :7762
24-12-2019, 10:21:18 [INFO]    Periodic event is enabled. Interval period = 180000s
24-12-2019, 10:21:18 [INFO]    Periodic time is Unknown
24-12-2019, 10:21:18 [INFO]    Connection Request server initiated with the port: 7547
24-12-2019, 10:21:18 [INFO]    Start session
24-12-2019, 10:21:18 [INFO]    ACS url: http://genieacs:7547
24-12-2019, 10:21:18 [INFO]    Preparing the Inform RPC message to send to the ACS
24-12-2019, 10:21:18 [INFO]    Send the Inform RPC message to the ACS
24-12-2019, 10:21:19 [INFO]    Get the InformResponse message from the ACS
24-12-2019, 10:21:19 [INFO]    Send empty message to the ACS
24-12-2019, 10:21:19 [INFO]    Receive HTTP 204 No Content
24-12-2019, 10:21:19 [INFO]    End session
24-12-2019, 10:21:19 [INFO]    Waiting the next session

You could set the UCI config cwmp.cpe.log_severity option to 'DEBUG' in order to show in details the cwmp log.

icwmp uBus

icwmpd must be launched on startup after ubusd. It exposes some CWMP client RPC along with some debug utilities over UBUS. The icwmpd registers tr069 namespaces with UBUS, that has below functionalities:

Note: For more info on the tr069 ubus schema see link or raw schema

tr069 ubus examples

The output shown in below examples are just for demonstration purpose, the actual output shall vary as per the cwmp configuration and state. The schema for UBUS is available at link or raw schema

root@iopsys:~# ubus -v list tr069
'tr069' @aadff65c
        "command":{"command":"String"}
        "status":{}
        "inform":{"GetRPCMethods":"Boolean","event":"String"}
root@iopsys:~#

Each object registered with the 'tr069' namespace has a specific functionality.

• To get the status of cwmp client, use the status ubus method:

root@iopsys:~# ubus call tr069 status
{
        "cwmp": {
                "status": "up",
                "start_time": "2021-07-29T09:29:02+02:00",
                "acs_url": "http://genieacs:7547"
        },
        "last_session": {
                "status": "success",
                "start_time": "2021-07-29T09:29:59+02:00",
                "end_time": "2021-07-29T09:30:00+02:00"
        },
        "next_session": {
                "status": "waiting",
                "start_time": "2021-07-29T09:59:59+02:00",
                "end_time": "N/A"
        },
        "statistics": {
                "success_sessions": 2,
                "failure_sessions": 0,
                "total_sessions": 2
        }
}
root@iopsys:~#

• To trigger a new session to ACS with the event '6 CONNECTION REQUEST' or '8 DIAGNOSTICS COMPLETE', etc.., use the inform ubus method with the appropriate event argument:

root@iopsys:~# ubus call tr069 inform '{"event":"6 connection request"}'
{
	"status": 1,
	"info": "Session started"
}
root@iopsys:~#
root@iopsys:~# ubus call tr069 inform '{"event":"8 diagnostics complete"}'
{
	"status": 1,
	"info": "Session started"
}
root@iopsys:~#
root@iopsys:~# ubus call tr069 inform '{"GetRPCMethods":"1"}'
{
	"status": 1,
	"info": "Session started"
}
root@iopsys:~#

• To reload the icwmpd config, use the command ubus method with reload argument:

root@iopsys:~# ubus call tr069 command '{"command":"reload"}'
{
	"status": 1,
	"info": "icwmpd config reloaded"
}
root@iopsys:~#

• To exit the icwmpd daemon, use the command ubus method with exit argument:

root@iopsys:~# ubus call tr069 command '{"command":"exit"}'
{
	"status": 1,
	"info": "icwmpd daemon stopped"
}
root@iopsys:~#

icwmpd command line

icwmpd command line options are described with --help option as below:

root@iopsys:~# icwmpd --help
Usage: icwmpd [OPTIONS]
 -b, --boot-event                                    (CWMP daemon) Start CWMP with BOOT event
 -g, --get-rpc-methods                               (CWMP daemon) Start CWMP with GetRPCMethods request to ACS
 -c, --cli                                           CWMP CLI
 -h, --help                                          Display this help text
 -v, --version                                       Display the version

icwmpd CLI

The icwmpd CLI is a debug utility and can be invoked using -c (--cli) command line option.

Different options of this CLI are described with help command as below:

root@iopsys:~# icwmpd -c help
Valid commands:
        help                                    => show this help
        get [path-expr]                         => get parameter values
        get_names [path-expr] [next-level]      => get parameter names
        set [path-expr] [value]                 => set parameter value
        add [object]                            => add object
        del [object]                            => delete object
        get_notif [path-expr]                   => get parameter notifications
        set_notif [path-expr] [notification]    => set parameter notifications

Note: icwmpd CLI is a debug utility and hence it is advised to use for debug and development purpose only.

icwmpd forced inform parameters

As per the cwmp inform requirements, cwmp client has list of parameters defined internally. The list contains below parameters:

Parameter name
Device.RootDataModelVersion
Device.DeviceInfo.HardwareVersion
Device.DeviceInfo.SoftwareVersion
Device.DeviceInfo.ProvisioningCode
Device.ManagementServer.ParameterKey
Device.ManagementServer.ConnectionRequestURL
Device.ManagementServer.AliasBasedAddressing

In addition to the above defined forced inform parameters as specified in datamodel standard, icwmp gives the possibility to add other datamodel parameters as forced inform parameters, by defining them in a JSON file.

Additional inform parameters can be configured in a JSON file as below:

root@iopsys:~# cat /etc/icwmpd/forced_inform.json
{
  "forced_inform":[
    "Device.DeviceInfo.X_IOPSYS_EU_BaseMACAddress",
    "Device.DeviceInfo.UpTime"
    ]
}
root@iopsys:~#

And then the path of the JSON file can be set in the UCI option: cwmp.cpe.forced_inform_json like below:

root@iopsys:~# uci set cwmp.cpe.forced_inform_json=/etc/icwmpd/forced_inform.json
root@iopsys:~# uci commit cwmp
root@iopsys:~# /etc/init.d/icwmpd restart

• It is required to restart icwmp service after the changes to use the new forced inform parameters
• This JSON file shouldn't contain duplicate parameters or parameters of the standard inform parameters specified in the datamodel
• Forced inform parameters defined in JSON should be leaf elements

Dependencies

To successfully build icwmp, the following libraries are needed:

Dependency	Link	License
libuci	https://git.openwrt.org/project/uci.git	LGPL 2.1
libubox	https://git.openwrt.org/project/libubox.git	BSD
libubus	https://git.openwrt.org/project/ubus.git	LGPL 2.1
libjson-c	https://s3.amazonaws.com/json-c_releases	MIT
libopenssl	http://ftp.fi.muni.cz/pub/openssl/source/	OpenSSL
libcurl	https://dl.uxnr.de/mirror/curl	MIT
libmicroxml	https://dev.freecwmp.org/microxml	LGPL 2.0

Runtime dependencies:

Dependency	Link	License
ubus	https://git.openwrt.org/project/ubus.git	LGPL 2.1
bbf	https://dev.iopsys.eu/iopsys/bbf.git	LGPLv2.1
uspd	https://dev.iopsys.eu/iopsys/uspd.git	GPL v2.0

icwmpd gets the datamodel from the DUT via ubus using uspd, and also it registers tr069 ubus namespace to expose some debug and cwmp client rpc funtionalities, so it is required to start it after starting ubusd and uspd.