From 6c10d449823a9f85199ccb79b0d47c7dfe1810f6 Mon Sep 17 00:00:00 2001 From: richb-hanover Date: Wed, 27 Jan 2016 15:31:48 -0500 Subject: [PATCH] Fixed links to script descriptions --- README.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 7d2d5d5..f179efa 100644 --- a/README.md +++ b/README.md @@ -3,13 +3,13 @@ OpenWrtScripts This is a set of scripts (sometimes also called "Openscripts") that configure and measure (and improve) latency in home routers (and everywhere else!) These scripts include: -* [getstats.sh](getstatssh) - a script to collect troubleshooting information that helps us diagnose problems in the OpenWrt distribution. +* [getstats.sh](#getstatssh) - a script to collect troubleshooting information that helps us diagnose problems in the OpenWrt distribution. -* [config-openwrt.sh](config-openwrtsh) - a script to configure the OpenWrt router consistently after flashing factory firmware. +* [config-openwrt.sh](#config-openwrtsh) - a script to configure the OpenWrt router consistently after flashing factory firmware. -* [betterspeedtest.sh](betterspeedtestsh) & [netperfrunner.sh](netperfrunnersh) & [networkhammer.sh](networkhammesh) - scripts that measure the performance of your router or offer load to the network for testing. +* [betterspeedtest.sh](#betterspeedtestsh) & [netperfrunner.sh](#netperfrunnersh) & [networkhammer.sh](#networkhammesh) - scripts that measure the performance of your router or offer load to the network for testing. -* [tunnelbroker.sh](tunnelbrokersh) - a script to set up a IPv6 6-in-4 tunnel to TunnelBroker.net. *This script has not been converted for OpenWrt* +* [tunnelbroker.sh](#tunnelbrokersh) - a script to set up a IPv6 6-in-4 tunnel to TunnelBroker.net. *This script has not been converted for OpenWrt* These scripts can be saved in the `/usr/lib/OpenWrtScripts` directory. The easiest way to do this is to use ssh into the router and enter these commands: