mirror/OpenWrtScripts
1
0
Fork 0
mirror of https://github.com/richb-hanover/OpenWrtScripts.git synced 2026-03-30 10:44:32 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions

Fix typos in script

Browse source
This commit is contained in:
Rich Brown 2015-04-29 01:12:44 -04:00
parent a300093954
commit 6971503028
1 changed files with 14 additions and 24 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

38
config-openwrt.sh
View file

@ -10,18 +10,18 @@
# All the sections are commented out. There are sections for:
#
# - Update the root password
# - Set up the eth0/WAN interface to connect to your provider
# - Set up the eth0/WAN interface to connect to via PPPoE
# - Update the software packages
# - Set the time zone
# - Enable SNMP for traffic monitoring and measurements
# - Enable mDNS/ZeroConf on the br-lan (LAN) interface
# - Set the SQM (Smart Queue Management) parameters
#
# To run this script
# ***** To run this script *****
#
# Flash the router with factory firmware. Then *telnet* in and execute these statements.
# You should do this over a wired connection because some of these changes
# will reset the wireless network.
# can reset the wireless network.
#
# telnet 192.168.1.1
# cd /tmp
@ -34,12 +34,12 @@
# Update the root password. Supply new password for NEWPASSWD and
# uncomment six lines.
#
echo 'Updating root password'
NEWPASSWD=conT7528
passwd <<EOF
$NEWPASSWD
$NEWPASSWD
EOF
# echo 'Updating root password'
# NEWPASSWD=your-new-root-password
# passwd <<EOF
# $NEWPASSWD
# $NEWPASSWD
# EOF
# === Set up the WAN (eth0) interface ==================
# Default is DHCP, this sets it to PPPoE (typical for DSL/ADSL)
@ -70,17 +70,6 @@ EOF
# opkg install avahi-daemon # install the mDNS daemon
# opkg install netperf # install the netperf module for speed testing
# === Update root password =====================
# Update the root password. Supply new password for NEWPASSWD and
# uncomment six lines.
#
# echo 'Updating root password'
# NEWPASSWD=enter-your-new-password
# passwd <<EOF
# $NEWPASSWD
# $NEWPASSWD
# EOF
# === Set the Time Zone ========================
# Set the time zone to non-default (other than UTC)
# Full list of time zones is at:
@ -115,6 +104,7 @@ EOF
# mDNS allows devices to look each other up by name
# This enables mDNS lookups on the LAN (br-lan) interface
# Uncomment seven lines
#
# echo 'Enabling mDNS on LAN interface'
# sed -i '/use-iff/ a \
# allow-interfaces=br-lan \
@ -126,10 +116,10 @@ EOF
# ==============================
# Set Smart Queue Management (SQM) values for your own network
#
# Use a speed test (http://dslreports.com/speedtest) to determine the speed
# for your own network, then set the values below accordingly
# Use a speed test (http://dslreports.com/speedtest) to determine
# the speed of your own network, then set the speeds accordingly.
# Speeds below are in kbits per second (3000 = 3 megabits/sec)
# For all the details about setting the SQM for your router, see:
# For details about setting the SQM for your router, see:
# http://wiki.openwrt.org/doc/howto/sqm
# Set DOWNLOADSPEED, UPLOADSPEED, WANIF and then uncomment 18 lines
#
@ -160,7 +150,7 @@ echo 'You should restart the router now for these changes to take effect...'
# The following sections have not been completed, and should not be uncommented:
#
# - Enable NetFlow export for traffic analysis
# - Enable mDNS/ZeroConf on the ge00 (WAN) interface
# - Enable mDNS/ZeroConf on eth0 for internal routers *only*
# - Change default IP addresses and subnets for interfaces
# - Change default DNS names
# - Set the radio channels